I'm receiving this gdb error on any code I try to debug any program with gdb. Here's the simplest process that reproduces the error
Create a main.cpp file with this content:
int main(){
return 0;
}
Run g++ -g main.cpp
Run gdb a.out
Inside gdb set a break point at line 2 with break 2
In gdb run the program with run
Output:
Starting program: /tmp/test/a.out
During startup program exited normally.
This is all done with gdb on the command line. I've tried using g++ and gcc with the same result. I'm not really sure where to go from here.
gdb version = 9.2
g++ version = 9.3.0
EDIT: I figured out what is causing the issue, but not how to fix it. The issue seems to be something related to my SHELL variable. I'm currently using xonsh as my shell but when I set my SHELL environment variable back to /bin/bash everything works as expected. Is there anything I can do to fix this while using xonsh? Should I report this to xonsh, gdb, both or neither?
I'm currently using xonsh as my shell but when I set my SHELL environment variable back to /bin/bash everything works as expected. Is there anything I can do to fix this while using xonsh? Should I report this to xonsh, gdb, both or neither?
This might be your xonsh startup problem, or it might be xonsh problem, or it could be that xonsh doesn't do what GDB expects it to do.
Normally, GDB forks / execs $SHELL -c "/path/to/your/exe $args" and expects the $SHELL to exec your program (this is done so shell redirection still works under GDB).
Only after that exec will GDB start setting breakpoints, etc.
If you have some xonsh init-file, which e.g. causes xonsh to exec something else, things could go bad. So I suggest trying to remove any such ~/.xonshrc or whatever it's called file, and seeing whether that fixes the problem.
If it doesn't, it could be that xonsh e.g. forks and execs your binary in a child (grandchild of GDB) instead of doing it directly, or it could be that xonsh doesn't understand the -c ... syntax.
If you don't care about redirection, you could also ask GDB to not use $SHELL at all: set startup-with-shell off. Documentation.
I'm not very into unix/linux, I'm using rhat linux with sh, tcsh shells.
What I'm trying to do is to debug lifecycle of the object of the class by breaking on it's default, copy c-tors, on d-tor and on operator=; move operations are not defined neither by compiler or me. I break on these functions and printf some lines and also print backtrace
br /project/src/some_file.c:408
commands
silent
printf "<%p> D E F A U L T c-tor bt:\n", this
bt
cont
end
The thing is there're a lot objects of this class, so there is a lot of output, and nothing helps me to disable output to the terminal, so I want see gdb output only in the file, not in the shell. Is it possible to achieve using sh or tcsh? - I can't really impact on the environment and use some other debugger or shell. The reason I want to disable any output from gdb and process being debugged to the shell is because I believe it slows down gdb and execution of the debugged process, which breaks behavior of debugged application.
Using gdb 8.1. I tried logging options of gdb, redirecting output by
run > somefile
and I tried to run gdb like this
gdb -p 1000 -x breakpoint.txt | tee somefile.txt
Thanks many times!
this link has various option for logging
http://sourceware.org/gdb/onlinedocs/gdb/Logging-Output.html
simple one is
set logging file file
Change the name of the current logfile. The default logfile is gdb.txt.
then
set logging on
Enable logging.
Background
I am currently trying to build an autonomous drone using ROS on my Rapsberry Pi which is running an Ubuntu MATE 16.04 LTS. Solving the Computer Vision problem of recognising red circles as of now.
Specific Problem
I am constantly getting the error I get in this question. To help me solve this, I have decided to use gdb. However, the command rosrun --prefix 'gdb run --args' zlab_drone vdstab does not seem to be working for me. zlab_drone is the name of the package and vdstab is the name of the executable I am trying to run. Since this is inside a ROS environment, I have grabbed the syntax from here, and used the suggestions in this question.
When I invoke this command, even with tui, I get a SIGSEGV and when I invoke list inside gdb itself, the program does not stay at a particular point and keeps listing a different line till it is out of range. This is quite a weird issue.
I managed to make it work without this issue earlier by using a different command, I reckon. I just cannot remember how I made it work last time.
Well, in the link you mentioned, it states clear that you should use either :
launch-prefix="xterm -e gdb --args" : run your node in a gdb in a separate xterm window, manually type run to start it
or :
launch-prefix="gdb -ex run --args" : run your node in gdb in the same xterm as your launch without having to type run to start it
So, it really looks like you missed an -ex as #ks1322 suggeseted in the comments or just type run to start the debug process.
I found out about this exclusive bug that relates to Raspberry Pi's solely. Basically the solution involves, as quoted by Peter Bennet:
There is a workaround. Start the program, then from another command
prompt or from an ssh remote login, use gdp -p xxxxx where xxxxx is
the process number. This works without crashing. If you need to debug
something that happens before you can get in from another command
prompt, add to the program a command that stops process at the
beginning of main, for example a call to gets, which will wait for you
to press enter before continuing.
I recently reinstalled Cygwin on my computer in order to get access to several command line elements that I was missing. I have never had previous difficulty with Cygwin, but after this reinstallation, an error message continues to appear after (almost) each command entered. For instance:
-bash-4.1$ wc m1.txt
3 [main] bash 2216 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x38D000)
-bash: fork: retry: Resource temporarily unavailable
2013930 4027950 74968256 m1.txt
Generally, the command still runs (as seen above), but not always. Occasionally, the 'error' message occurs several times in a row (the initial number "3" will then change to a "4" or "2", notably if I start a second Cygwin window.
Also, as soon as I start up Cygwin, I get the following message before the prompt:
3 [main] bash 6140 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x36D000)
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: Resource temporarily unavailable
-bash-4.1$
At the moment, I am debating whether to uninstall/reinstall Cygwin again or just live with the error messages, but I was curious if there might be an issue that I am unaware of.
(assuming Cygwin is installed at C:\Cygwin):
Open Task Manager and close any processes that look to be Cygwin related.
Open C:\Cygwin\bin in Windows Explorer
Verify that dash.exe, ash.exe, rebase.exe, and rebaseall exist in this folder
If any of them are missing, re-run Cygwin setup and select the dash, ash, and rebase packages
right-click your C:\Cygwin folder, uncheck Read-only (if its checked), and press OK.
When an error about not being able to switch some files comes up, select "Ignore All". Wait for this process to complete.
Browse to C:\Cygwin\bin in Windows Explorer
Right click dash.exe and click "Run as Administrator". A command Prompt should appear with nothing but a $
Type /usr/bin/rebaseall -v, hit enter, and wait for the process to complete.
If you get errors about Cygwin processes running, try Step 1 again. If that still doesn't work, Restart your computer into safe mode and try these steps again.
A commenter noted that, depending on your settings, you may have to type cd /usr/bin && ./rebaseall -v instead.
Try opening Cygwin again.
This process worked for me. I hope it works for you guys too.
Source: http://cygwin.wikia.com/wiki/Rebaseall
I would like to add the following to the above answers, as it is what I had to do after reinstalling Cygwin:
Navigate to the "/usr/bin" directory (usually, C:\cygwin\bin) and right click, Run as Administrator the file: dash.exe
Then, at the $ prompt type the following, hitting enter after each line:
cd /usr/bin/
/usr/bin/peflags * -d 1
/usr/bin/rebaseall -v
What it does is, it marks the dll's as "rebase-able," and then rebases them. You have to have peflags.exe in addition to the above files (in previous answers). You may have to restart windows after doing this and you will definitely need to make sure that there are no processes nor services belonging to cygwin running. (Use task manager, kill any related processes, and then under the services tab look for any service starting with CYG and stop it.)
After doing this, I was able to get cygwin to run without any errors about dll's being loaded to the wrong addresses aka fork errors, etc.
I hope that this helps others, as it was a pain to find.
SOURCE: http://www.cygwin.com/faq.html#faq.using.fixing-fork-failures
and the rebase README file.
To add on to other answers here, we ran into the same issue but could not run the rebase command from the ash or dash shell. However, when launching the command from the Windows cmd shell, the following worked.
cmd /c "C:\cygwin64\bin\ash.exe /usr/rebaseall -v"
-v is to get verbose output
I found another information here :
http://cygwin.com/ml/cygwin/2014-02/msg00531.html
You have to delete the database at
/etc/rebase.db* and do in a "ash" windows :
peflags * -d 1
rebaseall
It works for me on 2 servers.
I solved this problem by restarting my computer. Probably installed a driver update and kept using sleep instead of shutting down.
Experienced the same issue when loading Cygwin with cygiconv-2.dll forking and not loading successfully in the Cygwin terminal, but after turning off my AntiVirus (it was specifically Ad-aware), the issue resolved, and Cygwin worked properly.
In case you are using babun's Cygwin, after rebaseall, try launching Cygwin by executing .babun\cygwin\cygwin.bat in a Windows command prompt or Windows explorer.
This works for me (while launching babun's default console - mintty results in fork error).
I had the error on win10 and i was trying to rebase to c: before install.
then i saw that the installer was installing it instead to c:/Users/myuser
so i was coping all files from c:/Users/myuser to c:.badun
and then restart plus open badun.bat
not shure if this was wise its now duplicated XD... but then it worked again.
Rebaseing didn't help in my case. In addition to what other people suggested, I noticed that reducing the length of PATH environment variable fixed the issue for me (and for other people as well as can be seen from this answer).
This issue is intermittent in nature & I found this issue when there is network is too slow to connect to remote machine on AWS.... I have Shell script that runs through Gitbash shell & it connects to AWS EC2 instance with ssh..... Most of the time, it ran correctly but 2 out 100 times it get into this issue bash: fork: retry: Resource temporarily unavailable .... Killing the MSYS2 terminal from task manager helps to overcome with this issue....
Negative side is you need to run the scripts from the beginning...
I had the same issue on Windows 10 and the mobaxterm app (which uses cygwin) and I tried all of answers listed here however for me, the solution was to simply delete the "CryptoPro CSP" application.
I started facing this problem after upgrading to windows 10. As of now I do not see that any of the above method working.
What I am noticing is that if you start cygwin with admin right (right click and say "run as admin") then it works fine.
Or you open cmd as administrator and then launch cygwin from there, then also it runs fine.
Just reinstall cygwin and select TCL and activate EXPECT
I tried the following code, to communicate with the command line from c++ code.
#include<iostream>
#include<cv.h>
int main()
{
system("gnome-terminal");
system("cd");
}
The gnome-terminal command is executing fine. After I close the terminal, when am expecting the cd to execute, however, is not happening. Could you please help me and point out the reason? Thanks. I was expecting the function to make the cmd go down to the home directory
, but it did not. am working in linux
I tried it even by removing gnome. simple cd is not working. am I doing something rong>?
If I try ls, it seems to be working fine!
My main aim is to open a new terminal, and execute commands on that new terminal through the present program that opened the new terminal. Could you please tell me how I can achieve this??
If you want to run a program and wait for it to finish before executing next line, take a look at this page and example code here: http://www.thegeekstuff.com/2012/03/c-process-control-functions/
But if you want to run gnome-terminal and execute a command in newly created window, do this:
system("gnome-terminal -x sh -c 'cd /tmp ; ls -la'");
The system function creates a shell child process to execute the specified command.
cd is a shell command which changes the current working directory of that shell process only.
So the child's cd probably works fine, but it has no effect on your C++ program, which is a different process.
Instead, you probably want to look at the Linux system call chdir.
Thanks for your help!! This command worked perfectly fine from this link
https://superuser.com/questions/198015/open-gnome-terminal-programmatically-and-execute-commands-after-bashrc-was-execu
gnome-terminal -x sh -c 'command1; command2; exec bash'
and I entered the respective commands in the new window. But to change the working directory in the shell am working o, I haven't still figured that out.