I'm currently building a c++ program (with Qt) to take picture from a camera device. This part is actualy done, now I need to control 8 flashs divided in two groups in an automatic way.
The flash I already use are from ELINCHROM http://www.elinchrom.com/ and this device seems to be perfect for what I need but I could not find anywhere a way to control it from a different application than the one elinchrom propose.
Do you know if what I intend to do is even possible? If a solution exist with another brand I will also take it.
Thank you in advance for any replies, and please excuse my english.
Should be possible; the driver guide states that the driver is really a USB serial port driver. That means you can probably reverse-engineer the protocol.
I'm not actually well versed in C++ or SDL_Mixer, but I'm asking this question anyway on behalf on the Doom community. Put simply, nobody writing Doom source ports can seem to figure out how to control normal sound volume and MIDI sound volume independently using SDL_Mixer on Windows Vista or 7. I'll let James Haley, author of Eternity Engine, put it in his own words:
Seems the concept of independent volume for native MIDI doesn't exist under Windows Vista or 7, as using MIDI volume sliders in any application that has them (including most games that use SDL_mixer) also affects the volume of digital sound output. This makes attempting to adjust the relative volume of music for comfort impossible.
Has anybody found any workarounds for this? I'm guessing it's unlikely given how Microsoft seems to have skimped throughout the OS on any way to control the volume of individual sound devices separately.
I've heard of various workarounds all involving a Timidity driver, but this requires the user go above and beyond simply installing the game on his system. The only port that I know of that definitively fixes this issue is ZDoom, but it uses the GPL-incompatible FModEx and is thus not a suitable solution.
If you want some code to look at, Chocolate Doom is perhaps the easiest Doom source port to grok and you can grab its source here.
Any suggestions on other open-source sound and music libraries would be welcome as well.
A solution would be to ship with a FluidSynth-enabled SDL_mixer. You would also need to ship a SoundFont2 file to go with it. Fortunately, there are free SF2's out there, and some are even optimized for Doom's MIDI files. Licenses shouldn't be a problem, since SoundFonts are assets, not code.
You then load the SF2 using Mix_SetSoundFonts().
You may want to look at different MIDI libraries outside of SDL.
http://wildmidi.sourceforge.net/
http://sourceforge.net/apps/trac/fluidsynth/
http://timidity.sourceforge.net
I am maintaining a similar game port (Descent 2), and I have come across the same problem. Afaik there is no solution for it when using SDL_mixer. A cure to avoid sound being muted when turning off midi music I have found is to retrieve a handle to a temporary midi device, set the midi volume to max and then close the temporary device again.
For the longest time, the only solution we found was to use something like PortMIDI. However, Quasar of Eternity Engine fame has come across a neat solution:
http://www.doomworld.com/vb/showthread.php?s=&postid=1124981#post1124981
He essentially puts SDL_Mixer into its own process and controls it with RPC. Very clever.
So one problem with the previous answer I gave was that sometimes the MIDI subprocess did not behave itself, and would break or stop working in strange ways. Eternity's specific implementation used IDL, and I personally re-implemented it using pipes, but the subprocess itself was a bug magnet.
Thankfully, another answer was figured out rather recently. You can simply bypass SDL_Mixer entirely and deal with Windows' native MIDI support directly, which turns out to not require a ton of code once you know what you're doing.
https://github.com/chocolate-doom/chocolate-doom/blob/master/src/i_winmusic.c
You can also implement this sort of idea with PortMIDI and get the benefit of being able to communicate with external MIDI devices as well.
https://github.com/odamex/odamex/blob/stable/client/sdl/i_musicsystem_portmidi.cpp
Does anyone know how to get the signal from a PS/2-style mouse by using some c++ code?
What I want to do is the following: I took an old mouse for PS/2 port and want to use the light barrier of the middle wheel for some measurement purposes. It would be nice to get the information about any change of the middle wheel, i.e. the light barrier, by using some C/C++ code.
I tried to find some information on the Internet, but I'm a real n00b regarding port programming and didn't find something of help for me.
The msdn is decent for this topic, although this may give you higher level information than you're looking for and won't be specific to a particular ps2 port, but will be for any mouse connected to the system. If you want specific information from only the ps/2 port you'll probably have to look at writing your own device driver.
http://msdn.microsoft.com/en-us/library/ms645601%28v=VS.85%29.aspx#_win32_The_Mouse_Wheel
I don't think there are high-level libraries to do this, I think you'll have to look for a system-dependent solution.
What operating system do you wish to target?
On Linux PS/2 mouses (just like any other device) are represented by a virtual file in the /dev directory, usually in /dev/input (but it depends on what software is managing your devices /dev).
You should find out what device corresponds to your PS/2 mouse and just read it.
I've had a desire to learn at least a tiny bit about programming hardware for quite some time now and thought I'd ask here to get some starting points. I am a reasonably accomplished programmer with Delphi and Objective-c experience but have never even listened to a device port / interupt (I dont even know the terminology) let alone programmed a piece of hardware.
To start with what I would like to be able to do is,
Buy a simple bit of kit with 2,3 or 10 buttons
Plug the device into my pc via USB
Listen to the device and write some code to do something once the button is pressed.
I reckon this is a good place to start, anyone got pointers on hardware to buy or how I could start this?
I like the Arduino, easy to use, open source and a great community!
Good to get started with, and uses a subset of C/C++.
Also, has alot of addon hardware available, like GPS, Bluetooth, Wifi etc
My experiences with Arduino have been nothing but good, from the point you get it out of it's box (and install the free compiler on either Windows / Mac / Linux), to building your first 'sketch' (a project or application for the Arduino).
Making an application is easy, you have a Setup Method, which is called on startup, and then a loop method which is looped while the Arduino is running.
Then all you have to do is hook either inputs or outputs up to the pins on the Arduino board, tell the code what they are and hopefully you'll get the desired output.
One other really good thing about the Arduino (and others I'm sure) is that you now have a use for those old broken printers, or 2x CD-Rom's that no one wants, and every other little bit of out dated technology. It's amazing what you can find in a server room!
Now, I have only worked on small projects, like plugging in an LCD, and reading the room temp and various projects like that. But based on what I have done, I am happy with the Ardunio, it gives a good base to embedded programming and if it's not enough, you can always go bigger!
My 2 cents!
There's also the hot-off-the press netduino which uses the .NET Micro Framework and Microsoft Visual C# Express. I don't know that's it's better than the Arduino but it's another option.
Why don't you start with AVR programming for microprocessors. Yeh it might be a bit too low level. but I know many people that have started with it for hardware programming. you could find a compiler here. http://winavr.sourceforge.net/ and a good tutorial here: http://www.ladyada.net/learn/avr/
The previous poster mentioned the Arduino, but you should also consider a Teensy. It's basically the same thing, but price is a little better. You also have the option of using it in "Arduino" mode, or raw AVR mode. I don't know if Arduinos give you both options.
There is a comparison page where you can see the Teensy has some better hardware. The built-in USB gives it much better performance.
I would definitely suggest trying out various microcontrollers. Arduino Controllers are nice and have a number of tutorials.
However, its not your only option. In school, I worked with Microchip PICs, which are also quite nice for the hobbyist scene. The nice thing about the PIC was that our microcontrollers textbook supported it, so we got to see the application as we were learning the theory.
If I understand your question right, you are not interested in embedded programming. You want to buy something that works from the begining and control it from Windows.
When it comes to buttons, there is not much to do in Windows. These are HID controls and Windows handles all the interfacing for you. Nothing too exciting there.
In that case you can grab any Joystick and use the DirectInput (a part of the DirectX tech.) to interact with it. With force feedback you can do some cool stuff.
A more fun project would be to buy a Wii control and write some fun applicartions.
Look at this site to get some ideas of what I mean:
http://johnnylee.net/projects/wii/
Since Windows has no support for a Wii contrller, you really get to do some work here :)
I see that you like Delphi, so you can take a look at AvrCo Multitasking Pascal for AVR. You can try it at http://www.e-lab.de. MEGA8/88 version is free. There are tons of drivers, simulator, JTAG online debugger and programmer with visualization of all standard devices (for a startup, you can make a simple LPT programmer with just a few resistors). It can also make programs for all Arduino devices out there, since AVR is in their hearth. Atmel's STK500 is a good beginner board, with leds, switches, and few other peripherals. If you prefer open source, then WinAVR with GCC could be your path.
As already mentioned, Arduino is a good choice. The community is large and helpful. The nice thing is that you can transition right to a "real" language by using the GCC port for AVR micros, if you want. On my latest project I did this - prototype most of it with Arduino, then re-write it in C.
Starting with buttons and LEDs is a great idea. Build some confidence in working with basic hardware first, before modding the Wii!
Some links:
Windows GCC cross compiler (1 step install) for AVR: WinAVR
A Arduino clone kit
Adafruit is another good source of starter hardware and tech advice
The embedded StackOverflow
Any program you already write interacts with hardware, there's the monitor, keyboard, mouse, speaker etc. Getting a simple setup where your program can deal with buttons on a USB device will not teach you that much about working with hardware. It's partly a question of how low you want to go in the software stack and how much you want to learn about what happens at the point where the software ends.
Get yourself a copy of "The Art of
Electronics". It's a relatively easy read and covers everything between Ohm's law and the microprocessor and will give you a good idea of what the complete system does.
Read it.
Check out Digikey. You can buy anything hardware related from resistors, capacitors, IC's, low cost boards easily online and for reasonable prices.
Other replies mentioned Microchip PIC and Atmel AVR which are small and simple microcontrollers. Both companies have a wealth of application notes, check out their web site, read through some app notes. You can get low cost evaluation boards for the above or something like the Arduino mentioned in other replies. Consider designing and building your own board to force yourself to learn the basics. Find a friend who is an EE or serious hobbyist who wouldn't mind helping you with some tips.
If you want to learn more about PC hardware you can take a look at some simple device drivers (e.g. printer or serial port) under Windows (download the WinDDK), Linux or even DOS. Programming under something like DOS on a PC allows for relatively easy interaction with the PC hardware, you can use a printer port to read push buttons etc.
Links (I'm a new user so I can't link directly):
www.amazon.com/Art-Electronics-Paul-Horowitz/dp/0521370957
www.digikey.com/
www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2879
www.atmel.com/products/avr/
I am making a program in C++ for Windows XP that requires sound to be played so that any program that is currently recording the microphone can hear it, but it will not come out of the speakers. There seems to be no "real" way of doing it, but it is possible to go into "sndvol32 -R" and set the Wave out mix or similar as the current input device. Then you can turn the master volume to 0, play the sound, turn it back up, and reset the input device to the microphone. Is there a way of doing this transparently, or setting the current input device using functions, so that you dont have to see sndvol32 pop up?
Thanks
Doing this would require a complicated kernel-level driver.
Fortunately for you, someone has already done this (it's not free, but it's a fantastic program).