I am looking for some blog site where i will be able to directly paste c++ code examples
in my publishes and see the code with all the alignments and colors like i see it on pastie.org.
I need all those things be made automatically because i don't know HTML and can't make by myself the code changes.
Get wordpress + WP-Syntax.
You won't be able to "copy and paste" the code directly, but you'll have to wrap it like this:
<pre lang="c++">
CODE GOES HERE
</pre>
I use this JavaScript for syntax highlighting in blogger. It's very easy to use.
The key feature of above highlihter is that script permanently hosted on http://softwaremaniacs.org/, so that make it possible is to use script on blogger.com.
Another one nice syntax highlighter could be found at code.google.com (it could be integrated in blogger.com).
(source: googlecode.com)
I use the "Online syntax highlighting" at http://tohtml.com
Paste your code in the text box there, select the programming language and color scheme and it will generate a webpage with your syntax highlighted code. Copy and paste that into your blogger editor and you are good to go.
Related
Based on the answer to this question, I was able to get 2-column papaja with listings wrapping (rather than overflowing column width). But the listings package turns off various features that help code listings and R output stand out relative to the main text.
A simple solution would be if I could globally change the font faces and/or sizes selectively for code and R output. Is there a way to do that in papaja? I haven't been able to figure this out from papaja or Rmarkdown documentation. Thank you!
When you use the listings package in a papaja (or bookdown) document, what is technically happening is that all code is wrapped into an lstlisting LaTeX environment that comes with its own capabilities of customizing code appearance. Hence, you don't see the syntax highlighting that you would otherwise see if you would not use the listings package. The documentation of the listings package with instructions how to style your code can be found here.
To make use of this, you can extend the YAML header of your papaja document like this:
documentclass : "apa6"
classoption : "jou"
output :
papaja::apa6_pdf:
pandoc_args: --listings
header-includes:
- \lstset{breaklines=true,language=R,basicstyle=\tiny\ttfamily,frame=trB,commentstyle=\color{darkgray}\textit}
Here, I first specify the code's language, and use a tiny monospace font. With frame, I add a frame around the code block, and with commentstyle I set comments in italic and gray.
Thanks for making papaja. It's really terrific!
I just submitted my first journal article using it and ran into problems. The layout staff don't know what to do with the code chunks and listings that are fine in single-column, full page format, but not in their 2-column format. I'm trying use the class 'jou' option to make 2 columns, but I can't figure out how to control the size of code and listing fonts (possibly by modifying the css, as recommended here), or how to using the latex package 'listings' to set listings to wrap (as recommended here).
I'd be grateful for any advice, and my apologies if I've missed how one might do this in the documentation.
If it's only about getting the listings package to work, you can modify the YAML header that it looks similar to the following:
documentclass : "apa6"
classoption : "jou"
output :
papaja::apa6_pdf:
pandoc_args: --listings
header-includes:
- \lstset{breaklines=true}
However, note that using automatic line breaks will most likely break the code at some points. Therefore, it is worthwhile to consider alternatives: For instance, you could try to use a code style that uses more line breaks. The styler package and add-in might be helpful accomplishing this: https://styler.r-lib.org/
I've found several ways to automate folder comparison using scripts in Beyond Compare, but none that produce the pretty html report created from Session>Folder Compare Report>View in browser.
Here is an example of what that looks like.
I would love to be able to find the script that gives me that html difference report.
Thanks!
This is what I am currently getting
load "C:\Users\UIDQ5763\Desktop\Enviornment.cpp" &
"C:\Users\UIDQ5763\Desktop\GreetingsConsoleApp"
folder-report layout:side-by-side options:display-all &
output-to:C:\Users\UIDQ5763\Report.html output-options:html-color
The documentation for Beyond Compare's scripting language is here. You were probably missing either layout:side-by-side, which gives the general display, or output-options:html-color which is required to get the correct HTML stylized output. You may want to change options:display-all to options:display-mismatches if you only want to see the differences, and you might want to add an expand all command immediately before the folder-report line if you want to see the subfolders recursively.'
The & characters shown in the sample are line continuation characters. Remove them if you don't need to wrap your lines.
I have a page template in Tridion 2011 with Razor code that prints information based on RenderComponentPresentation() as the first thing in the page. No other markup comes before it, because the component, not the page, contains the initial markup. Unless I put at least one character before the first RenderComponentPresentation in the published output, the template refuses to render any presentations.
So, for example, if this is all that is in the layout TBB this works (in my real code the tcms are real of course):
<
#RenderComponentPresentation("tcm:mytcm","tcm:myothertcm")
but this does not
#RenderComponentPresentation("tcm:mytcm","tcm:myothertcm")
The first prints the contents of the component preceded by the "<", whereas the second does nothing at all. I don't want to have ANY markup directly at the start of the page template, I want the first thing to be the component. Is it possible?
I've just done a quick test in Template Builder using the latest version of the Razor Mediator (1.2) and couldn't replicate your issue.
Maybe you could try:
<text></text>
#RenderComponentPresentation("tcm:mytcm","tcm"myothertcm")
It won't render any additional markup but may trick the mediator into doing what you want (though like I said, I can't replicate your problem so can't verify whether it does).
Normally with Razor you iterate over any and all Component Presentations on the page, and right now I'm working with
#foreach(var cp in ComponentPresentations){
#cp.RenderComponentPresentation()
}
This will render every component on the page, regardless of predefined schema's or templates. Your issue however suggest a problem elsewhere. What kind of output does your page template generate (do mind its the page template using a compound template which in turn includes the Razor TBB you describe here). Is it .aspx, HTML or other? And what is the Component templates' output? is it an HTML fragment, or anything else?
As far as you syntax goes, that should be just fine other than the template invocation:
#RenderComponentPresentation("tcm:x-xxx-xx", "tcm:xx-xxx-xx")
I have a feeling this code only works when used within HTML tags, though, but that's just a hunch.
Bit of a hack but have you tried:
<text>#RenderComponentPresentation("tcm:x-xxx-xx", "tcm:xx-xxx-xx")</text>
or
#Html.Raw(RenderComponentPresentation("tcm:x-xxx-xx", "tcm:xx-xxx-xx"))
Disclaimer: not really used Razor mediator. Just Razor.
My data coming from the database might contain some html. If I use
string dataFromDb = "Some text<br />some more <br><ul><li>item 1</li></ul>";
HttpContext.Current.Server.HtmlEncode(dateFromDb);
Then everything gets encoded and I see the safe Html on the screen.
However, I want to be able to execute the safe html as noted in the dataFromDb above.
I think I am trying to create white list to check against.
How do I go about doing this?
Is there some Regex already out there that can do this?
Check out this article the AntiXSS library is also worth a look
You should use the Microsoft AntiXSS library. I believe the latest version is available here. Specifically, you'll want to use the GetSafeHtmlFragment method.