I am fetching the call-logs, appending them on information note using:
CAknInformationNote* note = new (ELeave) CAknInformationNote;
note->ExecuteLD(callLogs);
I perfectly run on emulator (show all call-logs on note) but nothing shows up when run on the actual device (a Nokia N73). Any ideas?
i think you should use some kind of file logging(you can even use RFile) and see till what point your application executing.i am assuming you dont see a crash/panic on hardware.i doubt if you are able to get the call logs properly first on device.
Related
I am working with a command line tool called 'ideviceinfo' (see https://github.com/libimobiledevice) to help me to quickly get back serial, IMEI and battery health information from the iOS device I work with daily. It executes much quicker than Apple's own 'cfgutil' tools.
Up to know I have been able to develop a more complicated script than the one shown below in PyCharm (my main IDE) to assign specific values etc to individual variables and then to use something like to pyclip and pyautogui to help automatically paste these into the fields of the database app we work with. I have also been able to use the simplified version of the script both in Mac OS X terminal and in the python shell without any hiccups.
I am looking to use AppleScript to help make running the script as easy as possible.
When I try to use Applescript's "do shell script 'python script.py'" I just get back a string of lenght zero when I call 'ideviceinfo'. The exact same thing happens when I try to build an Automator app with a 'Run Shell Script' component for "python script.py".
I have tried my best to isolate the problem down. When other more basic commands such as 'date' are called within the script they return valid strings.
#!/usr/bin/python
import os
ideviceinfoOutput = os.popen('ideviceinfo').read()
print ideviceinfoOutput
print len (ideviceinfoOutput)
boringExample = os.popen('date').read()
print boringExample
print len (boringExample)
I am running Mac OS X 10.11 and am on Python 2.7
Thanks.
I think I've managed to fix it on my own. I just need to be far more explicit about where the 'ideviceinfo' binary (I hope that's the correct term) was stored on the computer.
Changed one line of code to
ideviceinfoOutput = os.popen('/usr/local/bin/ideviceinfo').read()
and all seems to be OK again.
According to the documentation, QCameraInfo::availableCameras should return list of available cameras. There's no catch to it according to the docs.
But still, I have two webcams and the array of available cameras is returned empty. What can I do? Is this even in the scope of programming, or does this mean Qt only supports limited subset of webcams?
The OS I'm using right now is Windows 7x64.
I have this Problem too.Then I read about the example.
I found that once you have declared QCamera object.it will return the right info.
Like this :`
QCamera *cam = new QCamera;
qDebug()<<QCameraInfo::availableCameras().count();`
I have one camera,so it returns 1 at last;
Try to copy the mediaservice plugin folder into your application dir (where the exe resides).
At least that solved this specific problem for me.
You need to resolve your dependencies (like Thomas D. mentioned).
(take a look at http://doc.qt.io/qt-5/windows-deployment.html )
From yourpathof\Qt\...subdir...\bin
execute
windeployqt.exe --debug YOURPATH\Debug
or
windeployqt.exe YOURPATH\Debug
I'm trying to create an application which uses camera API, based on an example from Qt.
Problem:
Following call to check if video capture is supported returns false.
camera->isCaptureModeSupported(QCamera::CaptureVideo) //returns false.
If I try to ignore it and start recording - recording does not start and I get no error messages ( Also, QMediaRecorder::errorString() and QCamera::errorString() return empty strings ).
Image from camera correctly showed in QCameraViewFinder.
It basically is a known bug in windows.
https://bugreports.qt.io/browse/QTBUG-30541
https://doc-snapshots.qt.io/qt5-5.5/qtmultimedia-windows.html
It should work in other platforms, though.
Good Day,
I have searched the Internet tirelessly trying to find an example of how to start Windows Speech Training from with in my VB.Net Speech Recognition Application.
I have found a couple examples, which I can not get working to save my life.
One such example is on the Visual Studios Fourms:
HERE
this particular example users the "Process.Start" call to try and start the Speech Training Session. However this does not work for me. Here is the exmaple from that thread:
Process.Start("rundll32.exe", "C:\Windows\system32\speech\speechux\SpeechUX.dll, RunWizard UserTraining")
What happens is I get and error that says:
There was a problem starting
C:\Windows\system32\speech\speechux\SpeechUX.dll
The specified module could not be found
So I tried creating a shortcut (.lnk) file and thought I could access the DLL this way. My short cut kind of does the same thing. In the short cut I call the "rundll32.exe" with parameters:
C:\Windows\System32\rundll32.exe "C:\Windows\system32\speech\speechux\SpeechUX.dll" RunWizard UserTraining
Then in my VB.Net application I use the "Process.Start" and try to run the shortcut.
This also gives me the same error. However the shortcut itself will start the SPeech Training session. Weird?!?
So, I then took it one step further, to see if it has something to do with my VB.Net Application and the "Process.Start" Call.
I created a VBScript, and using "Wscript.Shell" I point to the Shortcut.
Running the VBScript calls the Shortcut and low and behold the Speech Training starts!
Great! But...
when I try to run the VBscript from my VB.net Application, I get that error again.
What the heck is going on here?
Your problem likely is that your program is compiled as 32-bit and your OS is 64-bit, and thus, when you try to access "C:\Windows\System32\Speech\SpeechUX\SpeechUX.dll" from your program, you're really accessing "C:\Windows\SysWOW64\Speech\SpeechUX\SpeechUX.dll" which, as rundll32.exe is reporting doesn't exist.
Compile your program as 64-bit instead or try the pseudo directory %SystemRoot%\sysnative.
Also, instead of rundll32.exe, you may want to just run SpeechUXWiz.exe with an argument.
Eg.
private Process StartSpeechMicrophoneTraining()
{
Process process = new Process();
process.StartInfo.FileName = System.IO.Path.Combine(Environment.SystemDirectory, "speech\\speechux\\SpeechUXWiz.exe");
process.StartInfo.Arguments = "MicTraining";
process.Start();
return process;
}
private Process StartSpeechUserTraining()
{
Process process = new Process();
process.StartInfo.FileName = System.IO.Path.Combine(Environment.SystemDirectory, "speech\\speechux\\SpeechUXWiz.exe");
process.StartInfo.Arguments = "UserTraining";
process.Start();
return process;
}
Hope that helps.
Read more about Windows 32-bit on Windows 64-bit at http://en.wikipedia.org/wiki/WoW64
or your problem specifically at http://en.wikipedia.org/wiki/WoW64#Registry_and_file_system
If you are using a 64bit OS and want to access system32 folder you must use the directory alias name, which is "sysnative".
"C:\windows\sysnative" will allow you access to system32 folder and all it's contents.
Honestly, who decided this at Microsoft is just silly!!
I'm working on a software which uses FFMPEG C++ libs to make an acquisition from an UDP streaming.
FFMPEG (1.2) is implemented and running but I get some errors (acquisition crashes and restarts). The log displays the following message:
*Circular buffer overrun. To avoid, increase fifo_size URL option. To survive in such case, use overrun_nonfatal option*
I searched online for documentation about how to use this option, but I only got informations about how to use when running directly ffmpeg executable.
Would someone know how to set the correct option in my C++ code to:
- increase fifo_size
- use overrun_nonfatal option
Thanks
The same option works from command line or C++ libraries, you need to modify your UDP URL as follows:
If you original URL looks like this:
udp://#239.1.1.7:5107
Add the fifo_size and overrun parameters like this:
"udp://#239.1.1.7:5107?overrun_nonfatal=1&fifo_size=50000000"
Remember to escape the URL with quotes.
overrun_nonfatal=1 prevents ffmpeg from exiting, it can recover in most circumstances.
fifo_size=50000000 uses a 50MB udp input buffer (default 5MB)
The only documentation is in the source code:
http://git.videolan.org/?p=ffmpeg.git;a=blob;f=libavformat/udp.c;h=5b5c7cb7dfc1aed3f71ea0c3e980be54757d3c62;hb=dd0a9b78db0eeea72183bd3f5bc5fe51a5d3f537
I don't have enough reputation to comment the other answer, but if I did I would say that studying the source linked in the answer:
fifo_size is measured as multiples of 188 Byte (packets) according to the line:
s->circular_buffer_size = strtol(buf, NULL, 10)*188;
so whilst Grant is roughly correct that "default 5MB", because of the line:
s->circular_buffer_size = 7*188*4096;
If you want a circular buffer of 50MB you should really set the fifo_size parameter to something closer to 50*1024*1024/188 otherwise 50000000 will give 50000000*188 bytes which is closer to 8965MB!