I use Oracle APEX (v22.1) and on a page I created a (line) chart, but I have the following problem for the visualization of the graphic:
On the y-axis it is not possible to show the values in the format 'hh:mi' and I need a help for this.
Details for the axis:
x-axis: A date column represented as a string: to_char(time2, 'YYYY-MM')
y-axis: Two date columns and the average of the difference will be calculated: AVG(time2 - time1); the date time2 is the same as the date in the x-axis.
So I have the following SQL query for the visualization of the series:
SELECT DISTINCT to_char(time2, 'YYYY-MM') AS YEAR_MONTH --x-axis,
AVG(time2 - time1) AS AVERAGE_VALUE --y-axis
FROM users
GROUP BY to_char(time2, 'YYYY-MM')
ORDER BY to_char(time2, 'YYYY-MM')
I have another problem to solve it in another way: I am not familiar with JavaScript, if the solution is only possible in this way. Because I started new with APEX, but I have seen in different tutorials that you can use JS. So, when JS is the only solution, I would be happy to get a short description what I must do on the page.
(I don't know if this point is important for this case: The values time1 and time2 are updated daily.)
On the attributes of the chart I enabled the 'Time Axis Type' under Settings
On the y-axis I change the format to "Time - Short" and I tried with different pattern like ##:## but in this case you see for every value and also on the y-axis the value '01:00' although the line chart was represented in the right way. But when I change the format to Decimal the values are shown correct as the line chart.
I also tried it with the EXTRACT function for the value like 'EXTRACT(HOUR FROM AVG(time2 - time1))|| ':' || EXTRACT(MINUTE FROM AVG(time2 - time1))' but in this case I get an error message
So where is my mistake or is it more difficult to solve this?
ROUND(TRUNC(avg(time2 - time1)/60) + mod(avg(time2 - time1),60)/100, 2) AS Y
will get close to what you want, you can set Y Axis minimum 0 maximum 24
then 12.23 means 12 hour and 23 minutes.
Related
I have a good sheet that I want to grab the header which a date time stamp which will match against another sheet find the entries with that date and suburb and type and give me an average cost.
My formula is =AVERAGEIFS(Sheet1!C:C,Sheet1!A:A, B11:B, Sheet1!F:F, C10) which gives me the average but i've hard coded the header date:
example:
What I want to do is dynamically add the data from the row above with the date time instead of of manually adding it in the formula something like this:
=AVERAGEIFS(Sheet1!C:C,Sheet1!A:A, B11:B, Sheet1!F:F, =CHAR(COLUMN()+64) & 10)
Which would automatically grab the column + row 10 e.g C10, D10, E10.
If i put =CHAR(COLUMN()+64) & 10 in its own cell it works but when I add it to averageifs condition it gives me a parsing error.
Expecting C10, D10, E10 from =CHAR(COLUMN()+64) & 10 which should allow me to dynamically filter data on the date int he header above it.
try:
=AVERAGEIFS(Sheet1!C:C, Sheet1!A:A, B11:B, Sheet1!F:F, INDIRECT(CHAR(COLUMN()+64)&10))
I have a data in Excel and I have uploaded in power bi, created a visualisation using a chart which looks like -
blank, CP, Jj10 are basically my y axis and dashes are my bars of horizontal chart. I have tried to show how my chart looks like because I don't get any other option
(Blank)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
There is a column named performance (sheet_name=Empl_data) and what I want is to replace the blanks with Non-GT in power bi with creating a new column.
What my output should look like -
(Non-GT)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I have tried this -
Non-GT = IF(ISBLANK('Empl_data'[performance]),"Non-GT",'Empl_data'[performance])
What i get is
Non-GT----------------964
(Blank)-------------34
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I just want to replace blanks with Non-TSG completely but still it shows blank. Please help me out to solve the problem and please let me know if I have made clear what my prblm is.
My data -
Empl_id
Empl_name
performance
99807
Somman paul
0076
Richards.M
8870
Maheen Josef.T
11209
Dojar Farah
6651
Macklegn Sagoe
Hi-po
551
Cada Farez
Jj10
12
Qwezy Goha
Hi-po
6567
Beheriop Produse
CP
2227
John semmers
0BN
656
Majeeio .f
80100
Drejju Yan
Is it actually Blank where it is showing nothing? First confirm there are spaces or really null in the data, then apply conditions as bellow-
Non-GT =
IF(
'Empl_data'[performance] = BLANK() || 'Empl_data'[performance] = "",
"Non-GT",
'Empl_data'[performance]
)
Q: Where you are transforming data with that condition? Power Query Editor? Or creating Measure or Calculated column?
Since I didn't find anywhere else this topic I will ask it here. I am getting data from CSV file, I have written datetime format in one of columns. I get that column with pandas module and then I need to count occurrences in specific time slots and plot that with matplotlib. Bellow you can see example of column.
Time and Date
0 2015-08-21 10:51:06.398000
1 2015-08-21 10:51:00.017000
2 2015-08-21 10:52:06.402000
3 2015-08-21 10:54:06.407000
...
I know how I can split time like so:
pd.date_range("10:50", "12:30", freq="1min").time
But how can I assign occurrences of my read values from CSV and then plot it? Any advice or direction would help.
It's hard to tell what you want as you haven't posted desired output but if I understand you correctly you want to count the number of rows in time intervals of certain length. You can do this by combining resample and len. To use resample, first set the index to 'Time and Date:
df.set_index('Date and Time', drop=False)
Note that drop=False is only necessary if the data frame has no other columns.
Then to get the number of rows in each 1-minute interval do
counts = df.resample('1min', len).astype(int)
If there are multiple dates and you want to sum the counts for each time interval over dates do
counts.groupby(lambda ts: ts.time()).sum()
Can anyone help to get the percent symbol[%] in Y axis value.
I have attched png. in that in y axis 0 t0 18 values are there I want to see it as 0% to 18%.
http://i.stack.imgur.com/pF6U0.png
You need to format in two places: the data and the axis. To format the data, use a NumberFormatter:
var formatter = new google.visualization.NumberFormat({pattern: '#%'});
// format column 1 of the DataTable
formatter.format(data, 1);
Format the axis values, via the vAxis.format option:
vAxis: {
format: '#%'
}
No need of the google.visualization line, just the next line is needed:
vAxis: {
format: "#'%'"
}
Explanation:
The difference is the double quotes and simple quote. format property follows ICU pattern (as per GChart specs) that is used for formatting. When the simple quotes are not used, the presence of % multiplies x100 the value per the ICU specs. So by adding the simple quotes, the % is kind of escaped (more info)
I am working with Google Charts. I need to add a '$' before the values on the y-axis as well as the value in the bubbles.
Is there a setting for this?
take care,
lee
UPdate,
Here is the data being used by the charts:
'Month','Semi-Detached in Toronto E04','Semi-Detached in Toronto E08','Condominium Townhouse in Toronto E04','Condominium Townhouse in Toronto E08', ],
['7/2011', 4354000,15305800,6776500,495000],['8/2011', 700000,10514418,7060786,0],['9/2011', 6854800,17805400,12087300,0],['10/2011', 7287400,14248900,16206500,0],['11/2011', 2696245,9733270,12698090,0],['12/2011', 1965800,6054500,8854390,0],['1/2012', 2450968,9012200,5500100,0] ]);
I've tried adding '$' before the values as well as '%24' as suggested before, but both throw syntax errors. And the values cannot be quoted without throwing a Google Charts error '
Data column(s) for axis #0 cannot be of type string×'.
Thanks everyone for your input. I found a question that was 99.9% the same:
How to set tooltips to display percentages to match axis in Google Visualization Line Chart?
Try using %24 which is the urlencoded form for $.
Use:
var formatter = new google.visualization.NumberFormat({prefix: '$'});
Check the example here:
https://developers.google.com/chart/interactive/docs/examples#interaction_example
More details here:
https://developers.google.com/chart/interactive/docs/reference#numberformatter