I have a data in Excel and I have uploaded in power bi, created a visualisation using a chart which looks like -
blank, CP, Jj10 are basically my y axis and dashes are my bars of horizontal chart. I have tried to show how my chart looks like because I don't get any other option
(Blank)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
There is a column named performance (sheet_name=Empl_data) and what I want is to replace the blanks with Non-GT in power bi with creating a new column.
What my output should look like -
(Non-GT)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I have tried this -
Non-GT = IF(ISBLANK('Empl_data'[performance]),"Non-GT",'Empl_data'[performance])
What i get is
Non-GT----------------964
(Blank)-------------34
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I just want to replace blanks with Non-TSG completely but still it shows blank. Please help me out to solve the problem and please let me know if I have made clear what my prblm is.
My data -
Empl_id
Empl_name
performance
99807
Somman paul
0076
Richards.M
8870
Maheen Josef.T
11209
Dojar Farah
6651
Macklegn Sagoe
Hi-po
551
Cada Farez
Jj10
12
Qwezy Goha
Hi-po
6567
Beheriop Produse
CP
2227
John semmers
0BN
656
Majeeio .f
80100
Drejju Yan
Is it actually Blank where it is showing nothing? First confirm there are spaces or really null in the data, then apply conditions as bellow-
Non-GT =
IF(
'Empl_data'[performance] = BLANK() || 'Empl_data'[performance] = "",
"Non-GT",
'Empl_data'[performance]
)
Q: Where you are transforming data with that condition? Power Query Editor? Or creating Measure or Calculated column?
Related
I have a good sheet that I want to grab the header which a date time stamp which will match against another sheet find the entries with that date and suburb and type and give me an average cost.
My formula is =AVERAGEIFS(Sheet1!C:C,Sheet1!A:A, B11:B, Sheet1!F:F, C10) which gives me the average but i've hard coded the header date:
example:
What I want to do is dynamically add the data from the row above with the date time instead of of manually adding it in the formula something like this:
=AVERAGEIFS(Sheet1!C:C,Sheet1!A:A, B11:B, Sheet1!F:F, =CHAR(COLUMN()+64) & 10)
Which would automatically grab the column + row 10 e.g C10, D10, E10.
If i put =CHAR(COLUMN()+64) & 10 in its own cell it works but when I add it to averageifs condition it gives me a parsing error.
Expecting C10, D10, E10 from =CHAR(COLUMN()+64) & 10 which should allow me to dynamically filter data on the date int he header above it.
try:
=AVERAGEIFS(Sheet1!C:C, Sheet1!A:A, B11:B, Sheet1!F:F, INDIRECT(CHAR(COLUMN()+64)&10))
I use Oracle APEX (v22.1) and on a page I created a (line) chart, but I have the following problem for the visualization of the graphic:
On the y-axis it is not possible to show the values in the format 'hh:mi' and I need a help for this.
Details for the axis:
x-axis: A date column represented as a string: to_char(time2, 'YYYY-MM')
y-axis: Two date columns and the average of the difference will be calculated: AVG(time2 - time1); the date time2 is the same as the date in the x-axis.
So I have the following SQL query for the visualization of the series:
SELECT DISTINCT to_char(time2, 'YYYY-MM') AS YEAR_MONTH --x-axis,
AVG(time2 - time1) AS AVERAGE_VALUE --y-axis
FROM users
GROUP BY to_char(time2, 'YYYY-MM')
ORDER BY to_char(time2, 'YYYY-MM')
I have another problem to solve it in another way: I am not familiar with JavaScript, if the solution is only possible in this way. Because I started new with APEX, but I have seen in different tutorials that you can use JS. So, when JS is the only solution, I would be happy to get a short description what I must do on the page.
(I don't know if this point is important for this case: The values time1 and time2 are updated daily.)
On the attributes of the chart I enabled the 'Time Axis Type' under Settings
On the y-axis I change the format to "Time - Short" and I tried with different pattern like ##:## but in this case you see for every value and also on the y-axis the value '01:00' although the line chart was represented in the right way. But when I change the format to Decimal the values are shown correct as the line chart.
I also tried it with the EXTRACT function for the value like 'EXTRACT(HOUR FROM AVG(time2 - time1))|| ':' || EXTRACT(MINUTE FROM AVG(time2 - time1))' but in this case I get an error message
So where is my mistake or is it more difficult to solve this?
ROUND(TRUNC(avg(time2 - time1)/60) + mod(avg(time2 - time1),60)/100, 2) AS Y
will get close to what you want, you can set Y Axis minimum 0 maximum 24
then 12.23 means 12 hour and 23 minutes.
I have a Google Sheet which is being populated by a Google Form. I am using Google Apps Script to add some extra functionality. Please feel free to access and modify these as needed in order to help.
Based on answers from the Form, I need to return a new date that factors in the time stamp at form submission.
This is a dumbed down example of what I need to do, but let's think of it like ordering a new car and its color determines how long it is going to take.
Car
Color
Toyota
Red
Honda
Blue
Tesla
Green
I need to write a conditional IF statement that determines how many weeks it will take to get the car based on the ordered color.
-
Red
Blue
Green
Toyota
1
3
5
Honda
2
4
6
Tesla
1
1
1
So if you order a Toyota in Red, it will take one week. If you order a Toyota in Green, it will take 5 weeks. If you order a Tesla, it will be really in one week no matter what color. Etc...
I started by writing some language in Sheets to take the Timestamp which is in Column A and add the appropriate amount of time to that:
=IFS(AND(B2 = "Toyota",C2 = "Red"),A2 + 7,AND(B2="Toyota",C2="Blue"), A2 + 21,AND(B2="Toyota",C2="Green"), A2 + 35,AND(B2 = "Honda",C2 = "Red"),A2 + 14,AND(B2="Honda",C2="Blue"), A2 + 28,AND(B2="Honda",C2="Green"), A2 + 42,AND(B2 = "Tesla"),A2 + 7)
And then I dragged that down the length of the entire column so that it would fill in as submissions came in.
However when you fill in the Google Form, it will overwrite what's in that entire row, blowing out what I had in that column.
Now I realized that the code needs to be written in Google Apps Script and returned as a value.
What kinds of modifications need to be made to my IFS statement in order to make it compatible with Google Apps Script?
For easier approach, QUERY would actually solve your issue without doing script as Broly mentioned in the comment. An approach you can try is to create a new sheet. Then have that sheet contain this formula on A1
Formula (A1):
=query('Form Responses 1'!A:C)
This will copy A:C range from the form responses, and then, copy/paste your formula for column Date Needed on column D.
Output:
Note:
Since you only copied A:C, it won't affect column D formula.
Your A:C in new sheet will update automatically, then the formula you inserted on D will recalculate once they are populated.
Add IFNA on your formula for column D to not show #N/A if A:C is still blank.
Formula (D2):
=IFNA(IFS(AND(B2 = "Toyota",C2 = "Red"),A2 + 7,AND(B2="Toyota",C2="Blue"), A2 + 21,AND(B2="Toyota",C2="Green"), A2 + 35,AND(B2 = "Honda",C2 = "Red"),A2 + 14,AND(B2="Honda",C2="Blue"), A2 + 28,AND(B2="Honda",C2="Green"), A2 + 42,AND(B2 = "Tesla"),A2 + 7), "")
I am working with Google Charts. I need to add a '$' before the values on the y-axis as well as the value in the bubbles.
Is there a setting for this?
take care,
lee
UPdate,
Here is the data being used by the charts:
'Month','Semi-Detached in Toronto E04','Semi-Detached in Toronto E08','Condominium Townhouse in Toronto E04','Condominium Townhouse in Toronto E08', ],
['7/2011', 4354000,15305800,6776500,495000],['8/2011', 700000,10514418,7060786,0],['9/2011', 6854800,17805400,12087300,0],['10/2011', 7287400,14248900,16206500,0],['11/2011', 2696245,9733270,12698090,0],['12/2011', 1965800,6054500,8854390,0],['1/2012', 2450968,9012200,5500100,0] ]);
I've tried adding '$' before the values as well as '%24' as suggested before, but both throw syntax errors. And the values cannot be quoted without throwing a Google Charts error '
Data column(s) for axis #0 cannot be of type string×'.
Thanks everyone for your input. I found a question that was 99.9% the same:
How to set tooltips to display percentages to match axis in Google Visualization Line Chart?
Try using %24 which is the urlencoded form for $.
Use:
var formatter = new google.visualization.NumberFormat({prefix: '$'});
Check the example here:
https://developers.google.com/chart/interactive/docs/examples#interaction_example
More details here:
https://developers.google.com/chart/interactive/docs/reference#numberformatter
I am new to VBA (I mean, REALLY new) and I would like you to give me some tips.
I have an Excel file with 2 columns: SKU and media_gallery
I also have images stocked in a folder (lets name it /imageFolder)
I need to parse the imageFolder and look for ALL images sarting by SKU.jpg , and put them into the media_gallery column separated by a semicolon ( ; )
Example: My SKU is "1001", I need to parse the image folder for all images starting by 1001 (all image have this pattern: 1001-2.jpg , 1001-3.jpg etc...)
I can do that in Java or C# but I want to give a chance to VBA. :)
How can I do that?
EDIT: I only need file names yes! And I should of said that I have 20 000 images in my folder, and 8000 SKUs , so I don't know how we can handle looping on 20 000 images names.
EDIT2: If SKU contains a dash ( - ), I don't need to treat it, so I can pass to the next SKU. And each SKU has a maximum of 5 images (....;SKU-5.jpg)
Thanks all.
How to insert images given you have one image name per cell in a column: How to get images to appear in Excel given image url
Take the above and introduce an inner loop for the file name:
if instr(url_column.Cells(i).Value, "-") = 0 then
dim cur_file_name as string
cur_file_name = dir("imageFolder\" & url_column.Cells(i).Value & "*.jpg")
do until len(cur_file_name) = 0
image_column.Cells(i).Value = image_column.Cells(i).Value & cur_file_name & ";"
cur_file_name = Dir
loop
end if