Trying to build bgfx. Following the documentation for building it, I run make mingw-gcc.
This, originally resulted in Set MINGW environment variable & make.exe": *** [mingw-gcc-debug32] Error 127 so I set the MINGW environment variable, and this got rid of the Set MINGW environment variable message. However, I still get the same error:
make.exe": *** [mingw-gcc-debug32] Error 127, and I also noticed:
C:/(directory to my project)/extern/bgfx/C:/MinGW/msys/1.0/bin/make.exe: No such file or directory. Like the directory to make.exe was being appended onto the end of the directory to bgfx. I'm at a complete loss as to why or even how this is happening, and I've no idea how to fix it. I've tried changing the MINGW environment variable, using mingw32-make, specifying mingw-gcc-release64, etc... To be honest, I don't even know if this is related solely to bgfx or if it's a problem with make or whatever Idk... Shooting my shot here to see if anyone can help.
Thanks.
Related
I get an error when I execute mingw32-make in cmd with the makefile.gcc found in the build\msw folder of the wxWidget decompressed zip. I followed the steps shown in this tutorial video.
The error is:
make (e=5): Acceso denegado.
mingw32-make: [makefile.gcc:5354: clean] Error 5 (ignored)
I tried adding "Everyone" with total control to the security tab in the properties option of the folder in which I had decompressed wxWidgets.
I changed the same option for make.exe file in C:\msys64\mingw64\bin
I read that it could be the antivirus, I'm using Windows Defender, I switched off the real time protection but it didn't change anything.
First of all, this is not a fatal error, as indicated by "(ignored)" at the end, so it's not clear what your actual problem is -- does the library get compiled or not?
Second, to debug problems such as this one, you could use the Process Monitor tool where you can find out accessing which file exactly triggers this error -- this could give you at least some idea. Without knowing it, it's really impossible to know what goes wrong on your machine.
I'm trying to run a c++ file which requires an mkl library. I installed that library in a folder on home. But I'm getting following error. I searched that this error is due to incorrect path assign. How can I correct that path?
`/public/intel/bin/icpc -g -I/public/intel/mkl/include -c main.cc
make: /public/intel/bin/icpc: Command not found
[main.o] Error 127
makefile:6: recipe for target 'main.o' failed
make: *** [main.o] Error 127`
Jerry,
It looks like you are using Linux or UNIX. Also it looks like you are trying to use ICC (the Intel compiler) with MKL. If you are using ICC, the Linux compile command is "icc", the Windows compile command is "icl".
Beyond that, you need to source the ??vars.sh files if you have not set the environment variables manually. For example, if you installed Parallel Studio, you would set up compiler environment variables as explained here: https://software.intel.com/en-us/articles/setting-up-the-build-environment-for-using-intel-c-or-fortran-compilers; and you would set up MKL environment variables as explained here: https://software.intel.com/en-us/mkl-linux-developer-guide-scripts-to-set-environment-variables.
Let me know if this helps.
I am trying to build u-boot
Toolchain:
http://web.archive.org/web/20130823131954/http://www.angstrom-distribution.org/toolchains/
U-boot: git.denx.de
I am following this site to build this u-boot
http://beagleboard.org/linux
It says to put cross compiler path before building.
export PATH=/usr/local/angstrom/arm/bin:$PATH
1) I can see angstrom folder in /usr/local. Also I think that we need the toolchain's actual place of binaries. Let suppose in /home/myhome/BBB/angtrom_x_y_z/usr/local/angstrom/arm/bin
So which path actually i should export?
2)I have tried to put both paths, but I am getting errors.
3)I have downloaded three toolchains
angstrom-2011.03-i686-linux-armv5te-linux-gnueabi-toolchain
angstrom-2011.03-x86_64-linux-armv7a-linux-gnueabi-toolchain-qte-4.6.3
angstrom-2011.03-i686-linux-armv7a-linux-gnueabi-toolchain-qte-4.6.3
1st gives errors as
CROSS_COMPILE=arm-angstrom-linux-gnueabi- make am335x_evm
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
GEN include/autoconf.mk
arm-angstrom-linux-gnueabi-gcc: 0: No such file or directory
arm-angstrom-linux-gnueabi-gcc: unrecognized option '-G'
cc1: error: unrecognized command line option "-mabicalls"
make[1]: *** [include/autoconf.mk] Error 1
make: *** No rule to make target `am335x_evm'. Stop.
second one is I think for 64 bit processor, I have i386 one, so it also doesn't worked
Third one is corrupted.
Can anybody tell me how to compile it as the site says. Maybe the site is outdated but still if anybody can tell me a straightforward way how to do this.
It looks like Angstorm toolchian is too old to deal with recent U-Boot. I tried your procedure and get other errors. I'm not sure why you try to use that old toolchain and if you have to use it. But I quickly check Linaro toolchain gcc-linaro-arm-linux-gnueabihf-4.9-2014.07_linux, which I use for boards like Cubietruck and A20-OLinuXino-MICRO and it works fine.
git clone git://git.denx.de/u-boot.git
cd u-boot
export PATH=${PATH}:${PATH_TO_TOOLCHAIN}/gcc-linaro-arm-linux-gnueabihf-4.9-2014.07_linux/bin
CROSS_COMPILE=arm-linux-gnueabihf- make am335x_evm_defconfig
CROSS_COMPILE=arm-linux-gnueabihf- make -j$(nproc)
mingw32-make: Interrupt/Exception caught (code = 0xc0000005, addr = 0x61207374)
When I run make on the windows prompt I get this error. I saw an article that said it has to do with the order of the paths specified on the Path environment variable. I made sure that MinGW/bin is the first path on the list (because that is where I'm getting mingw32-make but nonetheless I still get this error.
It works on the Git Bash prompt but strangely not on this Windows command prompt.
The problem was that I had some paths in my PATH variable that conflicted with make. Taking them out solved the problem.
i am getting this error at compile (actually this is a very simple project and the syntax is absolutely ok)
E:\proj1\Makefile.win [Build Error] [main.o] Error 1
this is my compiler log (dev c++ v 4.9.9.2)
Compiler: Default compiler
Building Makefile: "E:\proj1\Makefile.win"
Executing make...
make.exe -f "E:\proj1\Makefile.win" all
g++.exe -c main.cpp -o main.o -I"C:/Dev-Cpp/lib/gcc/mingw32/3.4.2/include" -I"C:/Dev-Cpp/include/c++/3.4.2/backward" -I"C:/Dev-Cpp/include/c++/3.4.2/mingw32" -I"C:/Dev-Cpp/include/c++/3.4.2" -I"C:/Dev-Cpp/include"
'C:\Users\r' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
make.exe: *** [main.o] Error 1
Execution terminated
my user path is 'c:\Users\r&d', i think the '&' is makeing trouble in compile process , does anybody has any idea ?, i can not reinstall windows because i have got many softwares installed on my current windows and it is very time consuming to me, how can i fix this /
r&d is definitely a problem. Try surrounding it with quotes: "c:\users\r&d" and hope for the best. If it doesn't work, change the folder to something without an ampersand (you don't need to reinstall Windows for that, just create another user).
You can try creating another user without the ampersand, and then copying your profile to it to keep all your settings and application preferences, as well as documents.
You might want to try another build enviroment, like code:blocks which has its own internal build system. You probably want make sure you are using the latest gcc mingw compiler and build system from mingw(use their installer, I think it was http://sourceforge.net/projects/mingw/files/Installer/mingw-get-inst/mingw-get-inst-20120426/ ), and even if you don't go with code::blocks, make sure you are using the new branch of devc++ that was forked and still being developed. One last thing is if you go with code::blocks, use a nightly build in the forum, http://forums.codeblocks.org/index.php/board,20.0.html as they are much more up to date.
The escape character in Windows is ^. So try
C:\Users\r^&d