I installed the Postman interceptor Chrome extension, the Postman interceptor and the custom Node version I was asked to install and once I try to start the capture I get a toast telling me that there is an "Error creating interceptor session" without any further useful information.
Following the troubleshooting tips I verified that:
Chrome is installed
the directory ~/Library/Application Support/Google/Chrome/NativeMessagingHosts exists.
I have a working internet connection.
my firewall allows Postman to connect to the internet.
I have permissions to read and write in the ~/.postman/InterceptorBridge directory.
I have write permissions to my ~/Downloads folder.
which node yields /usr/local/bin/node
the manifest file com.postman.postmanapp.json is not in ~/.postman but the documentation does not tell where it is even supposed to be. I deleted ~/.postman and reinstalled Postman. The directory did not reappear. The error persisted. I have no possibility to reinstall the interceptor from within Postman now.
Before deleting ~/.postman the Interceptor binary existed therein but is obviously gone now.
Executing pm.interceptorInstaller.reset() in the Postman dev tools did not enable me to reinstall the interceptor either. The error persists.
I appreciate any help.
Postman version: 9.15.8
Chrome version: 100.0.4896.60
macOS version: 12.3
Related
I try to install cyberpanal in digitalocean droplet, but it does not install successfully.
After that when i visited my website a '404 not found' default page from LiteSpeed is shown. Also the Apache is not running
Sample Image
If you have an issue with installing the CyberPanel, please consider launching a CyberPanel from the marketplace directly. It should be much easier for you to setup a server.
CyberPanel uses OpenLiteSpeed as a default web server, so you should not expect an Apache run by default.
Before visiting the page, did you create a website on the control panel yet? If not, then a returned 404 status code is expected.
More, https://cyberpanel.net/docs/2-creating-website/
If you have more question for CyberPanel, I'd recommend you ask in their forum https://community.cyberpanel.net/
I setup a django "hello world" app IIS (Windows Server 2012). The application is run successfully using the Django web server. However, when I tried to install in on IIS (following the instructions provided here) I get an HTTP 500 error with the message "python.exe - The FastCGI process exited unexpectedly".
I have seen numerous related posts on stackoverflow, but nothing seems to work for me. Based on the guidance
I have checked file permissions on both the app and virtual environment folder but they in my opinion this should not be the issue as the users IUSR and IIS_IUSRS can Read & execute, Read and List folder contents.
I have tried also to run wfastcgi-enable based on the instructions provided by this post but I get the error "ensure your user has sufficient privileges and try again". Please note that I tried running it both from an "elevated" command line and also power shell with no results.
I have reinstalled python to make sure it is installed for "all users" (as suggested by this post) but I get an error "0x80070659 - This installation is forbidden by system policy".
I looked in the Event viewer but I could not find something useful.
My questions:
Is there a specific log that I should check? How could I find it?
My django app does not have a web.config file. Should I create one?
My setup: Windows Server 2012 R2, IIS 8.5, Python 3.9.1
I'm working with a website running on laravel. The site works fine on my local through Homestead, no problems.
Recently, I pushed the git repo up to a server that never had this site running on it before. I set everything up right (had some nginx config issues for a while, but got those all sorted out). Nginx has the public folder set as the site root, so it hits the proper index page when you load the page.
What I'm getting is a 500 error. My error logs reveal the following is the reason:
site_root/public/../bootstrap/autoload.php - Failed to open stream: permission denied
in
site_root/public/index.php on line 22
I can confirm that the bootstrap folder and the autoload.php file are both accessible by the web user, and have permissions that should allow access.
I've read a few cases online of people solving this issue with a 'composer install'. I tried updating composer, doing an install, and dumping its cache. I also tried removing the vendor folder (which had been a part of the git repo), and running composer install to regenerate it. None of these have worked. Happy to supply any info that will help. This is Laravel 5.2 running on Ubuntu Server 14.04 with nginx, all on an AWS box.
Solved it. This was actually an issue with site-wide permissions. They were set to 770 instead of 775. I suspect that I can and should restrict them more. For now, I'm just happy to have it loading again.
Moral of the story is to check your permissions site-wide, not necessarily just on the file which gives you the fatal error. You may continue to get the same fatal error, despite permissions being wide-open on the mentioned file. If so, look for permissions issues elsewhere.
I'm trying t use the InfoRecoverySample in IS 5.0.0. I was able to build it as according to the instructions here:
https://docs.wso2.com/display/IS500/Recovering+Account+Information+Using+a+Webapp
However after placing the war file in [IS_HOME]/repository/deployment/server/webapps/ and restarting, I get errors in the application logs. Unfortunately they are very vague:
org.apache.axis2.deployment.DeploymentException: Error occurred while deploying webapp : [IS_HOME]/repository/deployment/server/webapps/InfoRecoverySample.war
Error occurred while deploying webapp : [IS_HOME]/repository/deployment/server/webapps/InfoRecoverySample.war
Error while deploying webapp: StandardContext[InfoRecoverySample.war].File[repository/deployment/server/webapps/InfoRecoverySample.war]
My best guess is that the pom.xml file is out of date because I see lots of references to 4.2.0. This is the pom.xml file I'm using:
https://svn.wso2.org/repos/wso2/people/chamathg/samples/is/InfoRecoverySample/pom.xml
Does it sound like I'm on the right track? If so, is there an updated pom.xml file (or sample project) out there?
TIA,
Mike
Deploy the war file in your tomcat/webapps folder, not the identity server webapps. then access via localhost:8080
edit:
The way the pom is designed is for deployment on your localhost, not the wso2 server. Despite what the instructions say. However, you can deploy it to [IS_HOME]/repository/deployment/server/webapps/ as long as you remove most of the jar files that are created in the war's WEB-INF/lib directory. These will conflict when being run from the IS. The only one you need to leave is org.wso2.carbon.identity.sso.agent-1.2.0.jar. remove, re-zip, and then redeploy.
When you attempt to apply any hot fixes via the ColdFusion 10 Administrator you continuously get:
Error occurred while installing the update:
Failed Signature verification
You may have even validated the files and manually and placed them in the hf-updates directory at which point the CF10 admin page still shows the "Install" option, but again you receive the same error.
This error means you've forgotten to apply the ColdFusion 10 Mandatory Update which updates the certificate used to validate install packages.
From Adobe's website:
All ColdFusion updates are now signed with the new code signing
certificate because of a code signing certificate revocation. This
mandatory Update ensures that your current installation of ColdFusion
10 is updated with the new code signing certificate. This update is
also required for proper functioning of the auto update functionality
in ColdFusion 10. Adobe strongly recommends that you apply this
update.
Once the update has been installed (you can find the JAR install instructions here) the service will be restarted and you will be able to apply subsequent updates via the ColdFusion administrator.
Edit:
Run the command prompt as Administrator:
Navigate to your jar file, and run the following command to run jar file:
D:\>java -jar cf10_mdt_updt.jar
#UncleSol,
I also encountered the issue after having installed the mandatory update (cf10_mdt_updt.jar). After successfully applying the mandatory update, CF wanted to apply update 12 as the first update, which is where I encountered this issue, so I downloaded and manually installed Update 11 from this page:
https://helpx.adobe.com/coldfusion/kb/coldfusion-10-updates.html (installed in exactly the same manner as NotJustClarkKent's instructions)
After manually installing update 11, I was able to use the CF Updater to install the rest of my updates.
Hope that helps.