I'm using Visual Studio Community 2022. Now I have a similar problem with Visual studio 2013 "A task was cancelled".
A few moments ago, everything went alright. However I suddenly found that when I try to build my cpp project, VS only output
1>----— Build started: Project: MyConsoleApp, Configuration: Release x64 —----
After about 5 minutes, it becomes
1>----— Build started: Project: MyConsoleApp, Configuration: Release x64 —----
1>A task was canceled.
1>A task was canceled.
========= Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
All my cpp projects have the same problem now. My time zone is correct. I have tried to reopen VS, restart my computer and reinstall Visual Studio, but this problem still exists.
I have the same problem as you, since February 28th, VS2022 could not build any project, until today, I uninstalled the anti-virus software (360 Security Guard) installed on my computer, it returned to normal work, I think this is due to the anti-virus software update caused by the incompatible VS2022, You can try uninstalling the anti-virus software installed on your computer, which may solve the problem
Related
I have a project of roughly 50 files that I build with the CMake integration in Visual Studio 2017 (latest release, version 15.0.0+26228.9).
If I regenerate my CMake cache and then build, my project is built normally. However, if I change something in one of my files, then try to rebuild without regenerating my CMake cache, nothing happens.
This is what the build window looks like:
Build started ...
========== Build: 0 succeeded, 0 failed, 1 up-to-date, 0 skipped ==========
Nothing will be built until I regenerate my CMake cache, where I will only be able to build once before getting the same issue.
Same issue happens on any CMake project I try to build. This issue only started happening on the latest full release of Visual Studio 2017, this did not happen in the RC builds.
I ended up repairing the Visual Studio 2017 install from the Visual Studio installer and that fixed it. Everything works as intended now.
I'm trying to build a brand new c++ console project in Visual Studio 2015 Community and getting the following output:
1>------ Build started: Project: ConsoleApplication3, Configuration: Debug Win32 ------
1>A task was canceled.
1>A task was canceled.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
From this question it looks like the same problem. but the time has been recently synced:
And restarting Visual Studio doesn't change the build output. I've tried uninstalling Visual Studio and then reinstalling it, but the outcome is the same.
Delete Debug/Release folders and restart MSVC.
After installing VS 2013 (Update 3) on windows 7 SP1 I have similar situation like in this post After installing windows 8.1 sdk visual studio cant build any win32 project and print output :
1>----— Build started: Project: ConsoleApplication1, Configuration: Debug Win32 —----
1>A task was canceled.
1>A task was canceled.
========= Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Just to be complete,
Closing and reopening Visual Studio worked for me after I had changed the time zone and was getting the same errors as you.
I encountered the same error when I installed VS2013 update 5. During the installation my VS was open. Prior to installation of the update, I was asked to close VS but I neglected. That might have been the reason for the error although not sure about the exact cause.
After installation, the installer prompted me to restart the computer and the error was gone after I restarted my computer.
I am encountering similar problem with VS2015 update 3. Once this start happening I can't build application and can't start another instance Visual studio as it gives out of memory exception.
After looking through task lists I found out that there are many instance of conhost.exe and MSBuild.exe processes. So as temporary fix I kill all instances and try again building it is not perfect solution but works some times.
You can try run following batch commands.
Taskkill /IM MSBuild.exe /F
Taskkill /IM conhost.exe /F
Changed the time zone of system (Start>Settings>Time&language>Date&time>Time zone) to automatic, and then restarted the VS2019(on this I was facing the issue) in administrator mode. Issue got resolved for me.
I had the "A task was cancelled" error, not after updating Visual Studio or changing the time clock, but when enabled editing to a file from my version control software.
Likewise, reloading Visual Studio fixed the error.
After installing VS 2013 (Update 3) on windows 7 SP1 I have similar situation like in this post After installing windows 8.1 sdk visual studio cant build any win32 project and print output :
1>----— Build started: Project: ConsoleApplication1, Configuration: Debug Win32 —----
1>A task was canceled.
1>A task was canceled.
========= Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Just to be complete,
Closing and reopening Visual Studio worked for me after I had changed the time zone and was getting the same errors as you.
I encountered the same error when I installed VS2013 update 5. During the installation my VS was open. Prior to installation of the update, I was asked to close VS but I neglected. That might have been the reason for the error although not sure about the exact cause.
After installation, the installer prompted me to restart the computer and the error was gone after I restarted my computer.
I am encountering similar problem with VS2015 update 3. Once this start happening I can't build application and can't start another instance Visual studio as it gives out of memory exception.
After looking through task lists I found out that there are many instance of conhost.exe and MSBuild.exe processes. So as temporary fix I kill all instances and try again building it is not perfect solution but works some times.
You can try run following batch commands.
Taskkill /IM MSBuild.exe /F
Taskkill /IM conhost.exe /F
Changed the time zone of system (Start>Settings>Time&language>Date&time>Time zone) to automatic, and then restarted the VS2019(on this I was facing the issue) in administrator mode. Issue got resolved for me.
I had the "A task was cancelled" error, not after updating Visual Studio or changing the time clock, but when enabled editing to a file from my version control software.
Likewise, reloading Visual Studio fixed the error.
Normally, when I use Visual Studio to do a build, I see warnings and errors shown in the output pane, e.g.
1>------ Build started: Project: pdcuda, Configuration: Release x64 ------
Compiling...
foo.cpp
Linking...
foo.obj : error LNK2001: unresolved external symbol "foo"
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I'm doing some GPU programming with CUDA. Upon upgrading to 2.1, I no longer get any useful output in Visual Studio. For example, all I now see is:
1>------ Build started: Project: pdcuda, Configuration: Release x64 ------
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
The other details can be found in BuildLog.htm, but it's inconvenient to hunt that file down all the time.
Does anyone know how to force Visual Studio to show the output in its output pane?
Things that don't help:
uninstalling CUDA: the problem persists in all projects
Tools > Options > Projects and Solutions > Build and Run > MSBuild project build output verbosity: changing this pulldown, even to "Diagnostic" has no discernable effect.
EDIT: Additional things that don't help:
devenv.exe /resetsettings
devenv.exe /resetuserdata
UPDATE (in response to Die in Sente): It's now working on one of the two machines (I'm not sure what I did to fix it though). The machine that's still having problems has a CUDA Visual Studio Wizard installed that has caused similar problems before. The still-broken machine had version 15.00.21022.8 of the compiler. The working machine has 15.00.30729.1. After making a backup, I transferred "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\BIN\amd64" from the working to the broken machine. I observe no changes in behavior on the broken machine.
I have exactly the same problem, but without CUDA. Today Visual Studio just decided it wasn't going to show any build messages anymore. It was working fine, then one of my builds it just stopped working. The problem persists over all my projects now, and persists over reboots. I also see the correct messages in buildlog.htm. This is ridonkulous!
EDIT: Ooh, I used the add/remove programs to do a repair, and now it works again! Yeah!
did you tried to reset IDE
devenv.exe /resetsettings
or
devenv.exe /resetuserdata
I also recently install CUDA 2.1 (on top of 2.0 I believe). The default installation for CUDA 2.1 moved the SDK from
C:\Program Files\NVIDIA Corporation\NVIDIA CUDA SDK\
to
C:\Documents and Settings\All Users\Application Data\NVIDIA Corportation\NVIDIA CUDA SDK\
which initially caused me some problems. Are all of your paths resolving correctly?
This might sound like a far out suggestion. Get the CUDA SDK and try your code with the sample CUDA-C++ project in there. Maybe something changed in the build rules for CUDA v2.1.
If you go to Tools->Options->Projects and Solutions->Build and Run. Last property is "MSBuild Project build output verbosity". It defaults to Minimal, change it to normal and the build messages will show up in Output window.
This also enables any <Message Text="test message"></Message> output to show up in Visual Studio Build Output Window.
Final solution: reinstall the OS.