As my plan was to exclusively use H2O's web GUI, I installed H2O following these steps: https://docs.h2o.ai/h2o/latest-stable/h2o-docs/downloading.html#download-and-run-from-the-command-line. I got a Windows Firewall popup asking me to allow h2o to communicate on public networks (I was connected to a public network at that moment). I accepted.
Now I would like to uninstall it, but I have not been able to find info about it. Also, it does not appear in the list of installed applications in Windows 10 settings. I have not found any rules related to H2O or port 54321 in Windows firewall either.
Please note:
This is the first time I install programs this way.
I do not have Python or R installed in my computer, as it was not necessary for using H2O's web GUI.
Uninstalling a simply a matter of deleting the H2O jar file in your case.
To my knowledge Windows will only open the port for the given piece of software. Once you remove H2O from your computer the firewall rule will no longer apply.
This is more of a Windows-firewall question rather than H2O question, so please take my answer with a grain of salt.
Related
I have a problem with a web service that is installed and started with a .msi that is created with the WiX toolset.
The service can be installed and started on all the machines I tested so far (shown as running in the Services Manager) but on some machines it is not reachable (for example via a browser) and not shown in the list of listening ports on that machine (displayed with 'netstat -a').
I am trying to figure out what's going wrong but I am not really familiar with web service development and configuration. It's a third party service, thus I don't know how it works internally.
A good starting point for me would be to find out, what exactly happens when a service is installed and started during the execution of the .msi-file.
Maybe I could try to tackle the problem on a lower level then.
Below is my code in the ServiceInstall-Element:
<ServiceInstall
Id="ServiceID"
Type="ownProcess"
Vital="yes"
Name="ServiceName"
DisplayName="ServiceDisplayName"
Description="Lorem Ipsum"
Start="auto"
Account="LocalSystem"
ErrorControl="normal"
Interactive="no"
Arguments="action=run">
</ServiceInstall>
The argument is important - without it, the service won't start or run.
Maybe someone else encounterd the same or a similar problem and can help me out.
Thanks already in advance - each hint is appreciated.
EDIT I (15.04.18):
As it might be a problem with the specific service, I will add some further information here:
It's a third party software called CryptoLicensing:
http://www.ssware.com/cryptolicensing/cryptolicensing_net.htm
Part of this software is that specific program, that serves as a License Server and does the license registration, for example in a customer's network.
The service can be run as a Windows application or installed and run as a Windows service. In both cases it should be listening on a (pre-)specified port on the installed machine.
Whenever I start the .exe as an application, everything works as intended. The service is reachable (for example with the browser) and can be accessed from other machines in the network.
When the .exe is installed and started as a service, it does not work as intended on every machine. For example if I install and start the service on my laptop, it is shown as running in the Services Manager, but is not reachable on its assigned URL (not even on the localhost) nor is the specific port displayed in the active listening ports, for example with 'netstat -a'.
The service itself starts without any error messages and does not log any errors or exceptions as it seems to be running without any problems.
I contacted the vendor, but sometimes he doesn't reply quickly and he is not very specific in his replies.
Before asking the question I assumed that it was a problem with the Windows user rights and the WiX installer but during the discussion here I had the feeling that it might a problem with the service itself.
I hope this 'new' piece of information helps in isolating and location the problem.
Thanks to everyone who helped so far!
Hopefully not stating the obvious here, but WiX doesn't do much except populate the ServiceInstall table in the MSI file, so this is about why Windows Installer won't start the service. ServiceInstall table:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa371637(v=vs.85).aspx
Also, this isn't really about ServiceInstall - it's probably about the ServiceControl element in your WiX source, but it's not clear whether that's how you're starting it or if you're starting it manually later on. That does make a difference. What is the error message and where are you getting it, and is it a 1920 or 1921 error (in the context of ServiceControl).
The main reason a service will start on one system but not another is missing dependencies. If your service is C++ based (the post doesn't say) then there are probably dependencies on C runtimes, UCRT runtimes, MFC or ATL runtimes and so on.
First: are you sure this service is intended to run as LocalSystem? (MSDN, SO).
Second: did you check the event logs in detail for anything obvious? If the service is good you should find a hint at least. Something to start with. I find that I sometimes miss the actual logs in the event viewer because it is so "crowded". My take on it: empty the log and stop and restart the service.
Something locking / blocking: If the service installs and runs OK I would suspect other factors such as firewalls (hardware & software), security software in general (anti-virus, malware scanners), network configuration issues (proxies, WINS, DNS and all the complexities involved in networking). Is the service trying to reach an UNC path?
Diverse Machines: What are the target machines? Are they virtual, are they physical, are they test machines, are they operative SOE machines in corporate networks? Are they the same OS version and edition?
Further Ideas: It is not quite related, but maybe skim this list of suggestions for debugging from another answer (I am not sure why it was down-voted, I think it is an OK list to inspire debugging ideas): Windows Application Startup Error Exception code: 0xe0434352 (maybe just skim the bolded words for ideas - Recommended).
sc.exe: And finally, perhaps check the sc.exe tool (Service Control) and see if it can provide you with some useful information for debugging.
sc.exe in the context of killing hung services (sample use).
sc.exe from MSDN
Some further links:
Windows Services Frequently Asked Questions (FAQ). Content seems to be up to date - at face value at least. These guys claim to be experts on services. I have no idea who they are.
Essential Tools for Windows Services: SC.EXE
Run Service Control (sc.exe) command on secure port
After almost 20 months we finally (and accidentally) found a solution to the problem! For the few machines, on which the service did not run properly, setting the NoInteractiveServices value in the registry to 0 did the trick. A value of 1 (which is default) means that no service is allowed to run interactively, regardless of whether it has the SERVICE_INTERACTIVE_PROCESS property. More information on Interactive Services.
I am not completely satisfied with the solution, because on all the other machines NoInteractiveServices is set to 1 AND the service runs properly anyway. However, on the machines where the service did not run interactively this solution worked for us. Thus I will accept this as an answer.
If anyone has more information on this issue and can explain why this works, feel free to
add them - I would be very interested!
I've got a decent PC that I'd like to install xenserver on, but it's also my primary workstation. Wondering if it's possible to access guests directly from the host machine -- meaning, can I use the monitor, input devices, etc that are attached to the host, to interact with the guests.
Currently setup as a dual boot Linux and Windows machine. I need them both running simultaneously while still being able to treat the host like a workstation. Already using Virtualbox, which is great but not what I'm aiming for.
I've searched high and low for an answer to this question. Maybe I wasn't searching with the right terms. I've found a package in the Ubuntu repos that adds an entry in grub along the lines of 'Ubuntu with Xen Hypervisor', but that was on a test machine that couldn't actually run Xen.
Normally, I'd just wipe this puppy and find out for myself, but there are really good reasons why I can't just jump into it this time, so I'm turning to the community.
Thanks for any and all info!
You can use a simple text console on the host to interact with the guests
xe console vm=guest
but I don't know of a way to access a graphical interface from the host.
I am a GIS tech trying to get migrate to Geoserver, unfortunately I am not very savvy on web hosting.
I installed the Windows version 2.3.1.
I was able to build by map and access it through localhost:8080\geoserver\www\
I take that to mean that the jetty server it working.
I understand that I should be able to replace my local IP address where "localhost" is and be able to access it from another computer via Http.
I can't figure out the next step. I have found great tutorials on every part of geoserver process except this. And the user guide does not get into this either.
My set up: Cable Modem > Router > PC with Geoserver
What I have tried: Setting up a virtual server on my router. I have tried changing by router to inbound port 8080 to private port 8080
I also tried 80 to 8080
and 80 to 80
I also tried windows firewall exception. and turning off windows firewall.
I read about using appache tomcat but I have not installed it because it seems that jetty is working (at least as a local host) and I don't want to put another program on 8080. And to my understanding it can work stand alone but I really honestly don't know no.
I am must be missing some vital piece of information on how to do this. I am hoping it is just so basic that it wasn't worth mentioning on tutorials.
Thanks
Karin
This would be a GeoServer configuration question, but since its deployed in jetty the solution is likely in the underlying jetty configuration. That being said it is a guess on my part (the jetty side of things) how they set up this distribution, but if you find a jetty.xml file, perhaps under an /etc directory then you should be able to edit that file and set a proper host in the configuration.
Seriously though, this has to be a pretty common GeoServer question so I bet they have some documentation floating around for setting this properly in their software distribution.
http://docs.geoserver.org/latest/en/user/webadmin/basics.html
That seems to indicate it might be dependent on your container configuration, in which case look through how ever they are configuring jetty for a Host setting that is likely hardcoded to 'localhost'
tldr; This question was to get help setting up Micro Cloud Foundry on Windows XP behind a corporate firewall as an innovation-demonstration project for a Fortune 500 IT departent. Basically, the project stalled, despite this stackoverflow page - the magic wasn't strong enough. I am accepting #DanHigman answer below, but if anyone sees this and can provide a simple straight-forward answer, by all means...
Can anyone provide a clear step-by-step on setting up MCF on a Windows (XP in my case) machine behind a corporate firewall, for demostrating the feasibility of PaaS in the corporate IT world?
My VM is installed and running and I can use the menu ok. I have vmc working. I have a test Node.js server app, that works on local, ready to push. But I can't get past that stage.
The firewall gave me trouble so I lowered my goal to just work offline. I followed the instructions noted below as best I could, but often the instructions are mac oriented - I would like them for a Windows command line (especially SSH tunneling):
http://blog.cloudfoundry.com/2011/09/08/working-offline-with-micro-cloud-foundry/
http://support.cloudfoundry.com/entries/20332921-micro-cloud-foundry-trouble-shooting-help
This blogger may have half-way covered my problem doing the SSH tunnel settings, but all it gives is "use Putty" - more detail would help:
http://support.cloudfoundry.com/entries/20419943-using-micro-cloud-locally
Also, whenever the vmc obviously gets an error or other message, it only outputs the following in the command line:
vmc target http://api.vcap.me
<<<
[200, "<html><body>SNP/2.0/102/Unknown Command 'info'</body></html>\r\n\r\n", {}
]
>>>
Thanks for any help. BTW - I know I could do this on my mac, the big obstacle is the windows and firewall environment.
Update:
#Dan and #ebottard: Thanks to your help, I'm almost there. ping is working now, hosts file seems right, but the vmc target api.vcap.me still does not find the VM at that 192.168.253.128 IP - even tho ping does. In the first link above, Martin wrote the following, but assuming we are doing it on a mac:
After the update is complete, you will need to make some changes on your local system. What you will need to do is to set up an SSH tunnel to access your Micro Cloud Foundry VM (note that you will need to supply the IP address in the command below with the actual IP of your VM, which is displayed in the console).
sudo ssh -L 80:192.168.168.149:80 vcap#192.168.168.149
Password:
vcap#192.168.168.149's password:Â
The first password being prompted is the sudo password for your machine, as it is needed to open port 80 which requires root privileges. The second password is the vcap user password which you entered during the initial configuration of your Micro Cloud Foundry.
I need to have these instructions translated into Windows, and all I have to go on is that I might use puTTy (which I have downloaded) to do it. Any more ideas?
Looks like you're running an application on your Windows machine called "Snarl" (a poor Windows-based clone of the OS 10 app Growl :-p). It looks like it's interfering with communication to the MCF intstance, close it and have another try.
Does anyone have a good way to set up multiple CFML engines, and versions of them, together in a suitable environment for cross testing a CFML based application.
Ideally, I'd like this to be Ubuntu Server based as I'm using it with VirtualBox (under Windows 7). Plus it'd be helpful if it was possible to switch between, so my laptop can cope with one at a time rather than all running at once. I'm thinking of the following:
Adobe ColdFusion 9
Adobe ColdFusion 10
Railo 3.3.x
Railo 4.x
OpenBD 2.x
I'd also like to get them serving from the same shared directory, so I don't have to have a copy of the code for each engine. Cheers
You mentioned being able to "switch between, so my laptop can cope with one at a time rather than all running at once", I'm guessing that you are thinking that each one will run on a different VM, or that they might require a huge amount of memory. I don't think you need to worry about that. Unless you require that they be on different machines, I think you could do this all on one VM and with one instance of a servlet container (like Tomcat).
From a high-level view, here is how I would do it.
Install Tomcat
Create or download .wars for each of the engines.
Deploy said .wars to that one instance of Tomcat
Set up Tomcat to use each of those servlets from a different host name (server.xml)
Create a code directory outside of Tomcat for your one copy of the code
Set up a Symbolic link in each webapp to link the code folder into the servlet
You should then be able to hit the same source from each engine by visiting the different host names in the browser.
I may be missing something. It has been a long time since I set something like this up. You'll likely need to make a bunch of tweaks (JVM settings, switching to Sun/ORACLE JVM vs. OpenJDK, etc).
I don't think running this many engines will cause you great trouble. In my experiences, for development, I have had 3 instances of CF9 running on Tomcat using only 189mb of RAM. And each additional instance did not increase that number by 1/3. Far less. It would not surprise me if you could run all of those handily with less than 512md of RAM. Possibly even 256mb if you are really hurting on memory.
I hope this helps.
For ColdFusion 10, Railo and OpenBD you would be looking at deploying with standalone installations of Tomcat, Jetty or JBoss.
ColdFusion 9, probably the easiest solution is "Enterprise Multiserver configuration" setup.
With these kinds of installation they are pretty much platform agnostic.
The things to be aware of are the web server, proxy and jndi ports that are used by each installation, but only if you want to run more than one server at a time.
After that it's whether you are bothered about proxying from apache or Nginx to the server instances and the connector you want to use.
No idea if this helps...
Since you've mentioned the VirtualBox, I'll share my personal approach to this task. It includes few fairly simple steps:
Install Ubuntu Server as VirtualBox guest (host is also Ubuntu).
Set up only basic software like JVM and updates. Set up virtual
machine networking as bridged adapter to use my Wi-Fi connection.
Configure my Wi-Fi router DHCP to assign static IP for MAC address of the virtual machine.
Add entry to my (host) system hosts: ip_assigned_to_vm virtual.ubuntu
Set up guest additions and mount my ~/www directory inside the machine to access web applications.
Now, when I need another machine for experiments, or some other configuration of software (I've tested ACF 10 and Railo 4 this way) I do two things:
Clone existing clean machine.
Make sure it is using the same MAC address with bridged interface.
That's it.
It doesn't matter which of the machines I run, they all can be accessed as http://virtual.ubuntu (of course, it requires proper web-server configuration on the guest). Same time they are independent and it is completely safe to make anything I wish and test anything that runs on Ubuntu.
Obvious downsides are that I can run just one machine at a time, plus much more disk space is used. Not a problem to me.
I've tried approach with Tomcat and multiple WARs, but it has couple of issues: I can't use different JVM and Tomcat settings, also if I screw the setup -- all the Tomcat hosts are down.
Hope this helps.