I have written the following query to extract a list of distinct military status from a SAS table.
proc sql;
create table mil_stat as
select distinct MILITARY_STAT_sERSS format $MILSTAT. as MILITARY_STATUS,
count(*) as TOTAL
from FPE
group by MILITARY_STAT_sERSS;
quit;
I need to add a summary row that shows the total count. I tried to do this in the proc sql statement, but could not figure out how to do it. So, I wrote the following proc report statement to provide the needed row in the report.
PROC REPORT DATA=work.mil_stat;
column MILITARY_STATUS TOTAL;
where MILITARY_STATUS ne '5';
define MILITARY_STATUS / group;
rbreak after / summarize style=[font_weight=bold];
compute MILITARY_STATUS;
if MILITARY_STATUS ne . then c_MILITARY_STATUS=MILITARY_STATUS;
else c_MILITARY_STATUS=' ';
if _break_ = '_RBREAK_' then MILITARY_STATUS = "Grand Total";
endcomp;
run;
The grand total row displays, but 'Grand Total' is truncated to a single character.
Any assistance to be able to display the 'Grand Total' string would be much appreciated.
Looks like MILITARY_STAT_sERSS is only one byte long. And also the format, $MILSTAT., that you are using with that variable does not have any decode for 'G'.
Try making MILITARY_STATUS long enough to store "Grand Total".
select MILITARY_STAT_sERSS as MILITARY_STATUS length=11 format=$MILSTAT.
...
Another solution would be to assign a value for the total ('G' is fine, or 'T', or whatever fits with your data) and then use that in the format. This would be my preferred solution, as it avoids having an unformatted value, and uses less space, but does require you to be able to adjust the format (or perhaps you can use a pass through format, if not).
proc format;
value $sex
'F' = 'Female'
'M' = 'Male'
'T' = 'Grand Total';
quit;
proc report data=sashelp.class;
columns sex height;
format sex $sex.;
define sex/group missing;
define height/analysis mean;
rbreak after/summarize;
compute sex;
if _break_='_RBREAK_' then sex='Total';
endcomp;
run;
Related
I'm doing a simple count of occurrences of a by-variable within a class variable, but cannot find a way to rename the total count across class variables. At the moment, the output dataset includes counts for all cluster2 within each group as well as the total count across all groups (i.e. the class variable used). However, the counts within classes are named, while the total is shown by an empty string.
Code:
proc means data=seeds noprint;
class group;
by cluster2;
id label2;
output out=seeds_counts (drop= _type_ _freq_) n(id)=count;
run;
Example of output file:
cluster2 group label2 count
7 area 1 20
7 sa area 1 15
7 sb area 1 5
15 area 15 42
15 sa area 15 18
....
Naturally, renaming the emtpy string to "Total" could be accomplished in a separate datastep, but I would like to do it directly in the Proc Means-step. It should be simple and trivial, but I haven't found a way so far. Afterwards, I want to transpose the dataset, which means that the emtpy string has to be changed, or it will be dropped in the proc transpose.
I don't know of a way to do it directly, but you can sort-of-cheat: you can tell SAS to show "Total" instead of missing.
proc format;
value $MissTotalF
' ' = 'Total'
other = [$CHAR12.];
quit;
proc means data=sashelp.class noprint;
class sex;
id age;
output out=sex_counts (drop= _type_ _freq_) n(age)=count;
format sex $MissTotalF.;
run;
For example. I'd also recommend using PROC TABULATE instead of PROC MEANS if you're just going for counts, though in this case it doesn't really make much difference.
The problem here is that if the variable in the class statement is numeric, then the resultant column will be numeric, therefore you can't add the word Total (unless you use a format, similar to the answer from #Joe). This will be why the value is missing, as the class variable can be either numeric or character.
Here's an example of a numeric class variable.
proc sort data=sashelp.class out=class;
by sex;
run;
proc means data=class noprint;
class age;
by sex;
output out=class_counts (drop= _:) n=count;
run;
Using proc tabulate can display the result pretty much how you want it, however the output dataset will have the same missing values, so won't really help. Here's a couple of examples.
proc tabulate data=class out=class_tabulate1 (drop=_:);
class sex age;
table sex*(age all='Total'),n='';
run;
proc tabulate data=class out=class_tabulate2 (drop=_:);
class sex age;
table sex,age*n='' all='Total';
run;
I think the best option to achieve your final goal is to add the nway option to proc means, which will remove the subtotals, then transpose the data and finally write a data step that creates the Total column by summing each row. It's 3 steps, but doesn't involve much coding.
Here is one method you could use by taking advantage of the _TYPE_ variable so that you can process the totals and details separately. You will still have trouble with PROC TRANSPOSE if there is a class with missing values (separate from the overall summary record).
proc means data=sashelp.class noprint;
class sex;
id age;
output out=sex_counts (drop= _freq_ ) n(age)=count;
run;
proc transpose data=sex_counts out=transpose prefix=count_ ;
where _type_=1 ;
id sex ;
var count;
run;
data transpose ;
merge transpose sex_counts(where=(_type_=0) keep=_type_ count);
rename count=count_Total;
drop _type_;
run;
I have a table with postings by category (a number) that I transposed. I got a table with each column name as _number for example _16, _881, _853 etc. (they aren't in order).
I need to do the sum of all of them in a proc sql, but I don't want to create the variable in a data step, and I don't want to write all of the columns names either . I tried this but doesn't work:
proc sql;
select sum(_815-_16) as nnl
from craw.xxxx;
quit;
I tried going to the first number to the last and also from the number corresponding to the first place to the one corresponding to the last place. Gives me a number that it's not correct.
Any ideas?
Thanks!
You can't use variable lists in SQL, so _: and var1-var6 and var1--var8 don't work.
The easiest way to do this is a data step view.
proc sort data=sashelp.class out=class;
by sex;
run;
*Make transposed dataset with similar looking names;
proc transpose data=class out=transposed;
by sex;
id height;
var height;
run;
*Make view;
data transpose_forsql/view=transpose_forsql;
set transposed;
sumvar = sum(of _:); *I confirmed this does not include _N_ for some reason - not sure why!;
run;
proc sql;
select sum(sumvar) from transpose_Forsql;
quit;
I have no documentation to support this but from my experience, I believe SAS will assume that any sum() statement in SQL is the sql-aggregate statement, unless it has reason to believe otherwise.
The only way I can see for SAS to differentiate between the two is by the way arguments are passed into it. In the below example you can see that the internal sum() function has 3 arguments being passed in so SAS will treat this as the SAS sum() function (as the sql-aggregate statement only allows for a single argument). The result of the SAS function is then passed in as the single parameter to the sql-aggregate sum function:
proc sql noprint;
create table test as
select sex,
sum(sum(height,weight,0)) as sum_height_and_weight
from sashelp.class
group by 1
;
quit;
Result:
proc print data=test;
run;
sum_height_
Obs Sex and_weight
1 F 1356.3
2 M 1728.6
Also note a trick I've used in the code by passing in 0 to the SAS function - this is an easy way to add an additional parameter without changing the intended result. Depending on your data, you may want to swap out the 0 for a null value (ie. .).
EDIT: To address the issue of unknown column names, you can create a macro variable that contains the list of column names you want to sum together:
proc sql noprint;
select name into :varlist separated by ','
from sashelp.vcolumn
where libname='SASHELP'
and memname='CLASS'
and upcase(name) like '%T' /* MATCHES HEIGHT AND WEIGHT */
;
quit;
%put &varlist;
Result:
Height,Weight
Note that you would need to change the above wildcard to match your scenario - ie. matching fields that begin with an underscore, instead of fields that end with the letter T. So your final SQL statement will look something like this:
proc sql noprint;
create table test as
select sex,
sum(sum(&varlist,0)) as sum_of_fields_ending_with_t
from sashelp.class
group by 1
;
quit;
This provides an alternate approach to Joe's answer - though I believe using the view as he suggests is a cleaner way to go.
I am trying to output a three way frequency table. I am able to do this (roughly) with proc freq, but would like the control for variable to be joined. I thought proc tabulate would be a good way to customize the output. Basically I want to fill in the cells with frequency, and then customize the percents at a later time. So, have count and column percent in each cell. Is that doable with proc tabulate?
Right now I have:
proc freq data=have;
table group*age*level / norow nopercent;
run;
that gives me e.g.:
What I want:
Here is the code I am using:
proc tabulate data=ex1;
class age level group;
var age;
table age='Age Category',
mean=' '*group=''*level=''*F=10./ RTS=13.;
run;
Thanks!
You can certainly get close to that. You can't really get in 'one' cell, it needs to write each thing out to a different cell, but theoretically with some complex formatting (probably using CSS) you could remove the borders.
You can't use VAR and CLASS together, but since you're just doing percents, you don't need to use MEAN - you should just use N and COLPCTN. If you're dealing with already summarized data, you may need to do this differently - if so then post an example of your dataset (but that wouldn't work in PROC FREQ either without a FREQ statement).
data have;
do _t = 1 to 100;
age = ceil(3*rand('Uniform'));
group = floor(2*rand('Uniform'));
level = floor(5*rand('Uniform'));
output;
end;
drop _t;
run;
proc tabulate data=have;
class age level group;
table age='Age Category',
group=''*level=''*(n='n' colpctn='p')*F=10./ RTS=13.;
run;
This puts N and P (n and column %) in separate adjacent cells inside a single level.
I know I can use the command KEYLABEL in PROC TABULATE to specify a custom label for the statistic names i.e:
KEYLABEL N = ' ' ALL = "Total" PCTN = "Percent" SUM = "Total";
It doesn't work with PROC MEANS. Is there an equivalent command? Can I use a workaround to do this? I'm running the SAS program and generating the Latex markeup automatically from that, so I need to change the names of the N, SUM, MEAN, MEDIAN, MIN, MAX columns reported in the PROC MEANS command if possible.
Thanks.
I don't think you can change the automatic variable labels in PROC MEANS to something custom, unfortunately. You can label the variable:
proc means data=sashelp.class;
var age;
label age="Child's Age";
class name;
output out=classmean sum=;
run;
You can use AUTOLABEL to automatically append (default) labels:
proc means data=sashelp.class;
var age;
label age="Child's Age";
class name;
output out=classmean sum= n= /autoname autolabel;
run;
But I don't think you can control it further than that. The easiest solution I can imagine is writing a macro to do it using PROC DATASETS [taking the known variable names and assigning them labels based on those names]. I don't know what you need to make them, but it's not terribly difficult to do. Something like this (the proc sql in particular will vary significantly based on your program).
%macro relabel(var=);
label &var._n = "&var. Count";
*... more of these ...;
%mend relabel;
proc sql;
select cats('%relabel(var=',name,')') into :rellist separated by ' '
from dictionary.columns
where memname='MYDATASET' and libname='WORK' and *criteria to determine in proc means*;
quit;
proc datasets;
&rellist.
quit;
So I have multiple continuous variables that I have used proc rank to divide into 10 groups, ie for each observation there is now a "GPA" and a "GRP_GPA" value, ditto for Hmwrk_Hrs and GRP_Hmwrk_Hrs. But for each of the new group columns the values are between 1 - 10. Is there a way to change that value so that rather than 1 for instance it would be 1.2-2.8 if those were the min and max values within the group? I know I can do it by hand using proc format or if then or case in sql but since I have something like 40 different columns that would be very time intensive.
It's not clear from your question if you want to store the min-max values or just format the rank columns with them. My solution below formats the rank column and utilises the ability of SAS to create formats from a dataset. I've obviously only used 1 variable to rank, for your data it will be a simple matter to wrap a macro around the code and run for each of your 40 or so variables. Hope this helps.
/* create ranked dataset */
proc rank data=sashelp.steel groups=10 out=want;
var steel;
ranks steel_rank;
run;
/* calculate minimum and maximum values per rank */
proc summary data=want nway;
class steel_rank;
var steel;
output out=want_min_max (drop=_:) min= max= / autoname;
run;
/* create dataset with formatted values */
data steel_rank_fmt;
set want_min_max (rename=(steel_rank=start));
retain fmtname 'stl_fmt' type 'N';
label=catx('-',steel_min,steel_max);
run;
/* create format from previous dataset */
proc format cntlin=steel_rank_fmt;
run;
/* apply formatted value to rank column */
proc datasets lib=work nodetails nolist;
modify want;
format steel_rank stl_fmt10.;
quit;
In addition to Keith's good answer, you can also do the following:
proc rank data = sashelp.cars groups = 10 out = test;
var enginesize;
ranks es;
run;
proc sql ;
select *, catx('-',min(enginesize), max(enginesize)) as esrange, es from test
group by es
order by make, model
;
quit;