Is there a way to edit the information included in different Alerts? For instance, if something doesn't include Job # and the customer needs to be able to have Job # in all alerts in order to be able to connect the dots, I would like to know if there is a way to change around what information is available.
Thank you!
Some of the alerts can be altered via configs. They have placeholders that can be changed (though there are only certain available placeholders.
If you hover over the internal note it will show you the available placeholders for that template.
enter image description here
Search template with Ctrl+F and you should see the ones that appear.
Related
I can create a group on the Amazon WorkMail console and add internal users to the group. However, I do not see an option to add external email addresses with different domains.
Any tips on how to do this? Should I just create an email forwarding rule on an internal user?
Unfortunately, at present, this isn't possible (more info below). So, your proposed solution of creating an email forwarding rule is likely the best solution.
One thing to note is that you may want to set up email redirect rather than email forwarding. If you redirect, the end recipient will see the email as coming from the original sender and addressed to the original recipient, as opposed to being forwarded. In WorkMail, you'll find redirect as one of the options, alongside forwarding, when setting up the rule(s).
One additional tip for setting up the redirect/forwarding rule. There's no condition in the rules setup to just forward everything. Because of that, you'll likely want to create 2 rules. The first rule would use the condition has my name in the To box and the second rule would use the condition Does not have my name in the To box. This should have you covered for just redirecting/forwarding everything. Fortunately, you can redirect to multiple destinations, so you can probably get away with just these 2 rules even if you have multiple final destinations.
Additional info about not being able to add external addresses to groups:
An AWS team member has stated that this isn't currently supported in this AWS forum post from 2017:
Indeed, it not possible to add an external email address to a group. I will forward this feature request to the service team.
A possible workaround is to create a redirect rule that redirect emails sent to this group to the external users.
As of today, you still get the following message when adding members to a group (console screenshot):
You can only add users and groups that are enabled for access to Amazon WorkMail.
[Edit, 2021-01-17: Tips on bulk addition of email addresses to a rule]
Bulk addition of email addresses to a rule
Unfortunately, there don't currently appear to be any APIs to create inbox rules programmatically. However, you can copy-paste a large number of emails into a rule.
First, you'll want to export the set of email addresses you have into e.g. a CSV file.
Then, you'll want to append a ; to each email address. The reason for this is that the character is recognized as a separator. If we don't use it, the email rule will interpret the entire pasted text as a single email address. As an example, in Google Sheets, this can be done with CONCATENATE. E.g. =concatenate(A1,";"). Here's a screenshot:
Next, open the email rule, copy the email addresses from the spreadsheet, paste them into the recipients box, and click the To button. In this case, it's 100 emails, so it takes a little bit of time to load:
Once it finishes loading, you'll see checkboxes next to the email addresses, like when you add single email addresses manually.
Make sure to click Ok on the recipients dialog, then click Ok on the rule dialog, and finally click Save changes on the Email Rules Settings panel to ensure everything gets saved.
It seems that there are two different Web UI for AWS Tag Editor (you need an AWS account to try them):
https://resources.console.aws.amazon.com/r/tags
I got this link from AWS Doc
https://eu-west-1.console.aws.amazon.com/resource-groups/tag-editor/find-resources?region=eu-west-1
In Management Console, if you select Resource Group > Tag Editor on the top of the console page, it will take you to this page
The two WebUI behave differently:
The former is global but the latter is region-specific (it will put you into a region even if you don't put the region parameter in the URL)
The former allows you to search for Not tagged in the filter; but the latter does not
The UI are slightly different
Is one of UI a newer version?
Update (2019-05-14)
(Please also see an explanation about the two links being NEW and OLD UIs that AWS offered at a certain point in time) By now the first link is gone. If you visit it, you will get a 404 Not Found error from AWS.
I am part of the team building the new Tag Editor. Yes, you are correct: Classic Tag Editor is deprecated, and will be shut down soon entirely. We are working on full feature parity between the two Editors, so you will very soon find everything you can do in the old one as well in the new one.
To add some more context on your different items below:
1) Both old and new Tag Editor use the same underlying tagging infrastructure, so this should never happen. Maybe there is some browser issue involved here? Feel free to open a support issue so we can look deeper into it, if this continues the case.
2) Yes, the new one also includes Lambda, and will very soon add more resource types. The same by the way for regions: The old Tag Editor supports not all regions, for example eu-north-1 or eu-west-3.
3) No, Route53 Hosted Zones are supported in both Editors. Route53 resources only exists in the us-east-1 region, so maybe you used the Tag Editor in another region?
4) Both Editors show the same data. The old editor merged what you used as Name Tag and the ID in the same field - in the new one, you see only the ID in the column ID, and the Name Tag is displayed in the column Tag: Name.
Searching across regions is something the new Editor soon will support, too, and the same applies for the filter you mention. For showing resources without a specific tag, there is a workaround you already can do: Click on the settings icon in the top right of the table, and enable the tag you are interested in as a column. You then can sort this column so that all untagged ones show up on top.
If you have any other ideas or requests for the Tag Editor, please let us know. The fastest and most reliable way is to just use the 'Feedback' Button in the console in the bottom left.
Cheers,
Florian
Hi I am providing my own answer here (thanks my colleagues Kannan for the insight)
#1 above is what AWS called Class Tag Editor. If you click on the Question mark on the Web UI (upper right corner), you will be taken to a page that says:
This documentation is for classic Tag Editor, which has been
deprecated
So #2 is the version that AWS want us to use.
Below I will called #1 Old and #2 New
I compared the example outputs from our environment (about 50 resources). The two outputs differ in these respects:
New seems to retain past resources for a longer time. For example, if an EC2 instance has been terminated, it may take a
longer time to be removed from the listing of New
New seems to include resources for DynamoDB but Old does not
Old seems to include resources for Route 53 Hosted Zones but New does not.
Both New and Old show Security Groups, but the ID strings are rendered slightly differently.
New renders an ID as sg-xxxxxxxxxxxxxxxxxxxxxx
Old renders an ID as someName (sg-xxxxxxxxxxxxxxxxx)
I am new to Hygieia. I have setup Hygieia (https://github.com/capitalone/Hygieia) as per the documentation and I could start my application and see the dashboard successfully. In Hygieia-Dashboard, I could see values coming for all widget items (say utilization, instances stoped, and so on.) except the IP Utilization widget. When i see the mongodb that i configured with this (after I ran AWS module) i could see data for most of the documents except the cloud_subnetwork and cloud_virtual_network. Is this causing the issue?
Can anyone please assist me for populating IPUtilization widget ?
if I am still missing with anything? Anyfurther configuration to be made for this?
I found a solution for this issue., i.e., we need to fetch values for subnets and virtual_networks by using the AmazonEC2Client's instances by calling its describeSubnets() and describeVpcs() respectively and save these to database. After this, we could see values in the IPUtilization widgets. Hope this helps!
I am trying to create a template in NiFi just like a data ingest template which provide by kylo.
Basically I want to allow user to select input data source it can be database or a file. If he selects file and then database processor should automatically gets disabled.
I have create a template in NiFi and imported it kylo, but while creating feed It does not show the feed input option.
How I can do this.
While registering the template, in the "Input Properties" section, you have to select which properties have to be shown in feed creation UI for user input i.e. Enable "Allow user input?"
Attached the screenshot for reference:
I think the best approach here would be to use the RouteOnAttribute as the step after the Data Source/ Data type is chosen.
This way you don't have to overthink it.
I have been working on Kylo for around 3 months now and surely know a thing or two about it.
While starting a Feed, Kylo asks you for which source you want to start a feed no matter you have a single processor or multiple which can act as a data producer or fetcher. Once you select one and start a feed, rest of the source processors get disabled automatically by Kylo in the resultant deployment of feed.
I'm new on vsphere and I have an important question.
Is there a section where I can set parameters that allow a vsphere to send me notifications/email when a condition happens?
For example when a virtual machine cpu usage go over a value that I have set as 'alarm value' or when a virtual machine disk space usage go over a value vsphere send an email/notification that inform me.
I try to navigate over the menu but I don't find anything like this.
can I use an external app?
Haven't done it myself but according to the documentation:
In the Actions tab of the Alarm Settings dialog box, click Add to
add an action.
In the Actions column, select Send a notification email from the drop-down menu.
In the Configuration column, enter recipient addresses. Use commas to separate multiple addresses.
If you're not familiar with alarms at all you may want to take a look at their Alarm Example.