I installed Aspose.Cells and tried to write a simple C++ file that includes Aspose.Cells.h. I soon realized that I had to install two other external libraries, boost and icu4c as without these libraries my compiler would throw errors saying some h or hpp files can not be found.
My problem is: even after I installed these libraries, I still couldn’t compile my code, as I received a new error saying “Fatal ERROR: comdef.h: No such file or directory.”
And the error persisted even after I installed the latest version for SDK for Win 10.
My simple file can run if I remove the line "#include Aspose.Cells.h" .
Can someone please enlighten me as to how to solve this error?
Also I noticed there is a folder called “Publish” under “include” folder for Aspose.Cells. This folder is besides boost and icu. Could this mean Publish is the third external library to be installed? But I couldn’t find any library called Public on the web. Pls see the screenshot below.
directory of include folder that comes with the installed Aspose.Cells package
Thanks a lot!
My code is as follows:
#include <iostream>
#include <Aspose.Cells.h>
using namespace std;
int main() {
cout << "hello!!!" << endl;
return 0;
}
Regards
Hillary
Related
Can someone please help me with my issue with Aspose.Cells library for C++?
I was writing my first C++ programme using Aspose.Cells library. Everything seemed smooth except that the following error was produced after I built the file:
Error before I launch is:
"Error exist in a required project.Continue launch?"
Error after running the code is:
"**fatal error: boost/config/compiler/gcc.hpp: No such file or directory**".**
If I commented out the line #<include Aspose.Cells.h>, the file can run with no errors.
I tried to solve the error by installing Boost library for C++ from zip file "boost_1_73_0", as I think Aspose depends on Boost to run. However, I couldn't link to Boost successfully as there doesn't seem to be a "include" folder and "lib" folder for me to add into project properties.
My questions are:
Will installing Boost solve my problem?
If yes, how can I install Boost library successful?
The following is my code in C++. Thanks a Lot in advance!
#include <iostream>
#include <Aspose.Cells.h>
using namespace std;
int main() {
cout << "!!!I am little red!!!" << endl;
return 0;
}
Regards
Hillary
UPDATE: I have successfully installed and linked Boot library now but I have got three warning message upon building: "Ignoring #pragma warning [-wunknown-pragmas]" , are these warning messages serious?
I also ran into another fatal error: unicode/uloc.h:No such file or directory. How can I correctly link up to unilib-master/Unicode library?
Yes, installing Boost helps.
If Aspose only requires header-only libraries from Boost, then you don't have to do much. The "include" path you're looking for is just the folder where you extracted the zip. The actual library headers are under boost/ in that folder, which are then found by the compiler.
If you need the shared libraries, you will need to build them. Follow the steps here Getting Started On Windows
I'd like to use the Boost library in my C++ code, so I've inputted the right include search path and the right library search path, then I added all the Boost library files in Xcode. When I build my code the compiler says that the build is successful. However, once I run the code, the console tells this:
Console:
dyld: Symbol not found: _PyBaseObject_Type
Referenced from: /usr/local/lib/libboost_python27.dylib
Expected in: flat namespace
in /usr/local/lib/libboost_python27.dylib
Program ended with exit code: 9
My code:
#include <iostream>
#include <boost/any.hpp>
int main()
{
std::cout << std::endl;
return 0;
}
Where is my mistake? Please help.
This error occurs when you don't add a package to your project the right way. The problem has resolved in my example by installing Boost via Homebrew. Installing the package the right way means that if you install it manually (e.g. downloading it from GitHub), you should install it on the right path. But I suggest always installing C++ packages via Homebrew.
i m trying to use sfml in my project using visual studio 2019. Following sfml documentation to perform setup for visual studio i have performed all the action required
i have included include folder in c/c++/additional include directory and also provided path for lib folder in linker setting and also provided additional dependencies in linker/input
but
#include <iostream>
#include <SFML/Graphics.hpp>
int main()
{
std::cout << "i cant tolerate" << std::endl;
return 0;
}
this code shows above mentioned error ,
cannot open include file 'Graphics.hpp' no such file or directory
it seems like include path is not working
how can i solve this issue
i tried many times but got same result
if anyone facing the same problem please check the platform in the project/properties win32 worked for my particular problem
This is not a new question but the solutions haven't worked for me. I want to read dicom files using C++. I have 32-bit Windows PC with VS 2013 community edition.
This post and other answers therein suggested using DCMTK. I installed DCMTK (using CMake followed by VS) and configured it for use with VS using guidelines and links provided in this post. Then I wrote a simple test program and tried to compile it:
#include "stdafx.h"
#include "dcmtk\dcmdata\dctk.h"
#include "dcmtk\config\osconfig.h"
#include "dcmtk\dcmimgle\dcmimage.h"
#include <iostream>
using namespace std;
int main()
{
DicomImage *image = new DicomImage("test.dcm");
if (image != NULL)
{
if (image->getStatus() == EIS_Normal)
{
if (image->isMonochrome())
{
image->setMinMaxWindow();
Uint8 *pixelData = (Uint8 *)(image->getOutputData(8 /* bits */));
if (pixelData != NULL)
{
/* do something useful with the pixel data */
}
}
}
else
cerr << "Error: cannot load DICOM image (" << DicomImage::getString(image->getStatus()) << ")" << endl;
}
delete image;
return 0;
}
Upon compilation, it gives the following error:
dcmdata.lib(dcuid.obj) : error LNK2019: unresolved external symbol _Netbios#4 referenced in function "unsigned char * __cdecl getMACAddress(unsigned char * const)" (?getMACAddress##YAPAEQAE#Z)
This error seems to be common but none of the following solutions work for me:
FAQ#27 and another post of DCMTK forum: It suggests using particular order of lib files to be included. My order of including files is as follows (I tried the reverse order as well but it didn't work):
All of this doesn't work. In fact, I'm not sure which lib files are supposed to be included? How to decide that?
I've also included "C:\Program Files\DCMTK\lib" under additional library directories and "C:\Program Files\DCMTK\include" under additional include directories in project properties.
Another similar question at stackoverflow has not been answered. Comments suggest to re-run CMake by disabling DCMTK_OVERWRITE_WIN32_COMPILER_FLAGS. I didn't do it because the DCMTK help page says don't disable this unless you really know what you're doing.
Can someone please guide?
The NetBios function resides in NETAPI32.LIB, so you can try moving NetAPI32.lib (which is in your list) to the top of that list.
Not sure which version of the DCMTK you use, but for the current development snapshot you need the following standard libraries (on Windows): "ws2_32 netapi32 wsock32". This information can be found in DCMTK's CMake files. By the way, you don't seem to use CMake for your project, right?
I think you misspelled dcmsign.lib as dcmsig.lib.
If changing that doesn't fix it, I would suggest the following order based on the support page that you linked to:
NetAPI32.lib
WSock32.lib
ofstd.lib
oflog.lib
dcmdata.lib
dcmsign.lib
dcmnet.lib
dcmsr.lib
dcmqrdb.lib
dcmtls.lib
dcmwlm.lib
dcmimgle.lib
dcmpstat.lib
dcmjpls.lib
dcmjpeg.lib
dcmimage.lib
ijg16.lib
ijg12.lib
ijg8.lib
I think that in this list, each library has to come after all the libraries that it depends on.
check your .lib and vs platform if the same ,such lib for x64, then your vs platform must be x64.
I had the same error. You can go to project properties-> linker -> input -> Additional Dependencies-> Edit -> add these two libraries-( netapi32.lib,wsock32.lib) before all other libraries . This solved the error for me .
I was using Visual C++ 6.0 just now, and I keep getting this error:
fatal error C1083: Cannot open include file: 'streambuf': No such file or directory
My code is just a simple hello world program.
#include "stdafx.h"
#include <iostream>
using namespace std;
int main(int argc, char* argv[])
{
cout<<"Hello World.";
return 1;
}
Then I went and checked my INCLUDE folder and found a file called STREAMBF, but the compiler was looking for STREAMBUF. Notice that the file that is present is missing the U, between the B and the F. This was from a good copy of VC++6.0, directly from the actual CD, not a pirated copy. So there should be all the files needed. But it appears that a file is missing! Is this MS being stupid again, and yet making another big mistake, and forgetting to include an important file on their CDs? I'd hate to think that every single CD for VC++6.0 that was pressed that came out of MS factories had this problem. And I know that it is a missing file, not just a misnamed file, as renaming STREAMBF to STREAMBUF just led to more errors.
Anybody know where I can find a copy of the file STREAMBUF? Or am I just overlooking something here? Is this exact error a known problem with running old copies of VC++ on modern OS's like Windows 7? Is it possible that the only reason that it's looking for STREAMBUF is that this is a newer file associated with Win7, and that if it was running in a different environment (an older OS), it would actually be looking for the correct file, STREAMBF? Can somebody help me here?
Your installation is either broken, deprecated or interpretes your code in wrong way.
You should only use older compiles if you are trying to build project developed entirely for this version.
Try to compile same code with new compiler, if you want to use VS then you should look for Visual Studio Express 2013.
Your code does not have any errors.
Modify your program to, you should be able to see it okay.
#include <iostream.h>
using namespace std;
int main()
{
cout<<"Hello World.";
return 1;
}
However,
your compiler is pretty old. You need to an upgrade.
There are C++ compilers for Windows from Microsoft Express Visual Studios Link and Info VS2013 to
some other non-Microsoft like GCC for Windows.
If you don't have installation access there are some portable c++ compilers.
Finally there are some online compilers for simple test. web based online compilers.
For my win 10 installation of VC 6.0, I had the same problem ... fatal error C1083: Cannot open include file: 'streambuf': No such file or directory
Replacing with <iostream.h> does not solve the problem.
I have checked the header file installation folder (Program files\VS98\VC98\INCLUDE). For some (unknown) reason, some file names have been changed during installation. Restoring the original name has solved the problem, in my case, in example:
Turn STREAMBF into STREAMBUF, STDXCEPT into STDEXCEPT, XCEPTION into EXCEPTION, FCTIONAL into FUNCTIONAL.
Notice: other header file names might be wrong. I have listed above the file names wrong in my installation.
I hope this may help.