I reviewed this thread OCaml - Cannot find graphics.cma but unfortunately wasn't able to resolve it finding the recommendation here. I'm on Catalina macos and when running ocamlbuild foo.byte, I get this error:
+ ocamlc.opt str.cma graphics.cma -thread threads.cma foo.cmo -o foo.byte
File "_none_", line 1:
Error: Cannot find file graphics.cma
Command exited with code 2.
Compilation unsuccessful after building 3 targets (0 cached) in 00:00:00.
I tried installing graphics via opam and installing xquartz as well manually after removing the brew version of xquartz which, enabled me to install graphics just fine but still gives me the error above.
Without more details, it sounds like you have not added the "graphics" package to your _tag file. (Detailing this dependency is also required with dune).
Related
I have an issue with Codelite compilation, running on raspbian jessie - these are the (known) steps I have taken to produce it.
First I installed Codelite with apt-get install Codelite, then produced a c++ project.
When running build project I get the error:
/bin/sh -c ' -j 4 -e -f Makefile'
/bin/sh: 1: -j: not found
0 errors, 0 warnings
I note that this error has been found and corrected previously, through running a different version of Codelite from 6.1.1 (that which apt-get installs). I therefore found the updated version of armhf .deb codelite from the rasbian archive with gdebi-gtk. However the updated version (9.1.1) produces the following error (install attempt with the graphical debian):
Error: Dependency is not satisfiable: libclang 1-3.8 (>=3.2)
I do not understand why the package manager cannot update these packages - do they not exist for the pi? I ran the manager as root, so I do not think it is a permissions issue.
EDIT 1:
Thank you for that Fabre. My Enviromental Variables file now looks like this:
CodeLiteDir=/usr/share/codelite
export MAKE=make
I still get the same error however.
I am using autotools for building my C++ application. In my configure.ac I have the following line:
AX_CHECK_COMPILE_FLAG([-Wall], [CPPFLAGS="$CPPFLAGS -Wall"])
which causes the following error when executing ./configure (after running autoreconf -i):
./configure: line 3825: syntax error near unexpected token `-Wall,'
./configure: line 3825: `AX_CHECK_COMPILE_FLAG(-Wall, CPPFLAGS="$CPPFLAGS -Wall")'
My system: Linux web 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u2 x86_64 GNU/Linux
On my Ubuntu machine it works well, why do I get this error?
autoreconf isn't magic (though I encounter package maintainers who obviously believe this). When you ran autoreconf, it failed to find the AX_CHECK_COMPILE_FLAG macro, and produced a corrupt configure script. Usually that produces an error/diagnostic message at the same time.
'AX_CHECK_COMPILE_FLAG` comes from the autoconf archive project, and Debian has a package which provides this, named autoconf-archive. Likely, you forgot to install it:
sudo apt-get install autoconf-archive
Preface: I am new to OCaml, OPAM, and OASIS.
tldr question: How do I properly set up a package with opam that is not already available in the repository (I can't just do opam install X)? More details follow:
I am trying to include ocaml-glpk in an OCaml project. I installed ocaml-glpk just by running make and make install as stated in the README, and the given example compiles and runs correctly. However, I am using OASIS to generate the build system of my project, and I am not sure how to set it up. I have the same example (renamed to glpkExample.ml in a src folder) and the following in my _oasis file:
Executable "glpkExample"
Path: src
MainIs: glpkExample.ml
CompiledObject: best
BuildDepends:
glpk
After running oasis setup -setup-update dynamic, I run make and get the following error:
ocaml setup.ml -build
Finished, 0 targets (0 cached) in 00:00:00.
+ /home/dimitrios/.opam/system/bin/ocamlfind ocamlopt -g -linkpkg -package glpk src/glpkExample.cmx -o src/glpkExample.native
File "_none_", line 1:
Error: Cannot find file /home/dimitrios/.opam/system/lib/glpk/glpk.cmxa
Command exited with code 2.
Compilation unsuccessful after building 4 targets (3 cached) in 00:00:00.
E: Failure("Command ''/usr/bin/ocamlbuild' src/glpkExample.native -tag debug' terminated with error code 10")
make: *** [build] Error 1
It seems the glpk library is missing a cmxa file needed to compile a native executable. I am not sure how to fix this. To compile glpkExample.ml correctly, my Makefile includes /home/dimitrios/.opam/system/lib/glpk and also uses the OCamlMakefile, which is extremely long and convoluted. Any help on setting this up with OASIS or how to get ocaml-glpk to work nicely with OASIS would be greatly appreciated.
Thanks!
This website is not appropriate for bug reports. You should really report it here.
The temporary solution is to use CompiledObject: byte to compile in bytecode.
If you're using opam then it is best to install application with it, not manually. Try to clean up your system and remove whatever you installed, and then do:
$ eval `opam config env`
$ opam install ocaml-glpk
Afterwards, if glpk is packaged in opam correctly, it should work with your setup, i.e., just with oasis's BuildDepends field and nothing more.
I try to compile an Ocaml project with an Ocaml version provided by Opam.
My ocamlbuild, ocamlfind, and oasis seem OK :
/Users/fred/.opam/4.02.1/bin/ocamlbuild
dhcp-182-73:compil fred$ which ocamlfind
/Users/fred/.opam/4.02.1/bin/ocamlfind
dhcp-182-73:compil fred$ which oasis
/Users/fred/.opam/4.02.1/bin/oasis
But when I try to compile, it seems that a wrong version of ocamlbuild is called, and even the version of ocamlfind is right, I think that it explains why ocamlfind can't find the sexplib library.
$ make
ocaml setup.ml -build
Finished, 0 targets (0 cached) in 00:00:00.
+ /Users/fred/.opam/system/bin/ocamlfind ocamldep -package threads -package sexplib.syntax -package core -package comparelib.syntax -modules src/tricot/tricot.mli > src/tricot/tricot.mli.depends
ocamlfind: Package `sexplib.syntax' not found
Command exited with code 2.
Compilation unsuccessful after building 1 target (0 cached) in 00:00:00.
E: Failure("Command ''/usr/local/bin/ocamlbuild' src/tricot/tricot.cma src/tricot/tricot.cmxa src/tricot/tricot.a src/tricot/tricot.cmxs src/compil/compil.cma src/compil/compil.cmxa src/compil/compil.a src/compil/compil.cmxs src/main.native -use-ocamlfind -tag debug' terminated with error code 10")
make: *** [build] Error 1
I've tried to tell oasis which version of ocambuild to use without success, does someone knows how it could be done ?
Thanks
Try deleting setup.data and running make again. Oasis caches the paths the first time you try to build, and doesn't update them automatically afterwards. Perhaps you tried to build it, then used opam switch, then tried to build it again?
You must be missing a
eval $(opam config env)
See the documentation of opam switch.
Note that normally opam's install procedure should have made so that this gets invoked automatically on new shells. You may want to run opam init again it will prompt you to agree to make changes to your .profile so that everything is in order when you start new shells.
EDIT: In fact it looks like you changed to the system switch between the two invocations you show us. So it seems that in the system switch sexp is not installed. In anycase whenever you opam switch in a shell always invoke the command I mentioned above so that the right paths are setup.
In addition to Thomas's answer, you can discard the configuration by
ocaml setup.ml -distclean
I'm trying to install OCaml 3.12.1 on 64 bit Linux (Mint Linux which is essentially Ubuntu 11.04). I'm using the latest rocketboost (godi-rocketboost-20110717). I run ./bootstrap and after a while get the following (in bootstrap.log):
4287 ### Building godi-pcre
4288 ===> Cleaning for godi-pcre-6.2.2godi1
4289 => Checksum mismatch for pcre-ocaml-6.2.2.tar.gz.
4290 Make sure the Makefile and checksum file (/home/phil/godi-3.12.1/build/godi/ godi-pcre/distinfo)
4291 are up to date. If you want to override this check, type
4292 "godi_make NO_CHECKSUM=yes [other args]".
4293 Error: Exec error: File /home/phil/godi-3.12.1/build/godi/godi-pcre/./../../ mk/bsd.pkg.mk, line 1689: Command returned with non-zero exit code
4294 Error: Command fails with code 1: godi_console
Is this a package problem with pcre?
And how would I use the suggest "godi_make NO_CHECKSUM=yes [other args]" to fix this?
This has been fixed by the maintainer of the pcre-ocaml library. It should work fine now.