I am working on a fix for tox warnings in my builds:
"WARNING: test command found but not installed in testenv"
NOTE: This is a related question but without explanation: Tox WARNING:test command found but not installed in testenv
When I change my tox.ini from [testenv] to [env] the commands run fine without warnings.
I could not find any documentation on [env] vs. [testenv].
Is it that somehow my environment is called ENV vs. TESTENV or am I using the wrapper\parent environment when I specify [env] or ??
Thanks for the help.
tox knows nothing about [env]. Change from [testenv] to [env] and tox ignores unknown section so the commands are simply not run.
Related
I was following the documentation provided at https://docs.terra.money/docs/develop/how-to/terrad/install-terrad.html. After installation was completed I ran the terrad version --long command but it is showing zsh: command not found: terrad in the response. I have checked the $GOPATH is already set.
You may have to add the GOPATH to your $PATH as well:
export PATH=$PATH:$(go env GOPATH)/bin
I'm using MinGW64 via an MSYS2 download and am currently trying to install the Solar Geometry 2 library (http://www.oie.mines-paristech.fr/Valorisation/Outils/Solar-Geometry/) for use. I'm following their install README, which states to navigate to the directory and "configure" (I've been typing "./configure". However, when I do so, I get the following message in my terminal:
$ ./configure
configure: loading site script /mingw64/etc/config.site
/mingw64/etc/config.site: line 13: config.site:13: default build_alias set to x6_64-w64-mingw32: command not found
/mingw64/etc/config.site: line 20: config.site:20: default prefix set to /mingw4: No such file or directory
configure: error: cannot find install-sh or install.sh in . ./.. ./../..
When I initially installed MSYS2 I set up the etc/fstab file as recommended. However, I'm quite new to MSYS so I'm assuming I botched something in my setup. I haven't edited anything in the config.site file mentioned in the errors, so I'm wondering if it's something in there.
Any help is greatly appreciated, thank you
No where in the directions for "Solar Geometry" do I see reference to MSys or MSys2.
I suggest you install the compiler toolchain and base development file. No idea if you editing /etc/fstab will cause problems. I do not normmaly edit it!
Install MinGW Package build packages. You might need more packages installed.
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
Hello everyone,
I have installed Openmdao, pyOpt and pyoptsparse on my computer. As my program works with the Scipy optimizer, I tried it with a random optimizer of pyoptsparse (that was 'ALPSO'). It worked and I was happy. But it turns out it seems to be the only one working.
Every time I try to use another one (like 'SLSQP', which is the default optimizer !), i get this message "pyOptSparse Error : There was an error importing the compiled SLSQP module", inside a frame made of '-' and '+'.
Does anybody know what to do ? I am using Ubuntu if it changes something.
Thanks to swryan for the link, i found the answer.
One of the possible answer was to put libgfortran.so.3 in anaconda2/lib, but i already had it.
They were also saying the problem was solved when installing anaconda 4.0+ but i also had the latest version.
What worked for me was to run : conda update libgfortran --force
Doing it without the --force retrogrades the scipy, which seems to disable scipy.optimize.least_squares. If you did that, you can then run conda update scipy --force
Did you get any errors when you ran 'python setup.py install' for pyoptsparse? I looked at the setup.py file for pyoptsparse and there are some instructions in there that you could try:
print("\nTo install, run: python setup.py install --user\n\n"
"To build, run: python setup.py build_ext --inplace\n\n"
"For help on C-compiler options run: python setup.py build --help-compiler\n\n"
"For help on Fortran-compiler options run: python setup.py build --help-fcompiler\n\n"
"To specify a Fortran compiler to use run: python setup.py install --user --fcompiler=<fcompiler name>\n\n"
"For further help run: python setup.py build --help"
)
I am trying to get Leiningen and Cygwin working together.
One of the problems I think I have is that I have Java installed in "C:\Program Files\Java..." directory. The space appears to be causing issues.
When I try to run the lein script in Cygwin, I am getting the following error:
./lein: line 325: C:\Program Files\Java\jdk1.8.0_05\bin\java.exe : command not found
Then I thought the issue was the space. So I changed line 325 from:
"$LEIN_JAVA_CMD" \
to (for testing purposes):
"$'C:\\\Program Files\\\Java\\\jdk1.8.0_05\\\bin\\\java.exe'" \
But, I am still getting this error:
./lein: line 325: $'C:\\Program Files\\Java\\jdk1.8.0_05\\bin\\java.exe' : commande introuvable
However, this file clearly exists:
Owner#Owner-PC ~
$ ls -alh $'C:\\Program Files\\Java\\jdk1.8.0_05\\bin\\java.exe'
-rwxr-xr-x 1 Owner None 187K 8 mai 15:39 C:\Program Files\Java\jdk1.8.0_05\bin\java.exe
The lein script appears to be properly configuring Leiningen for Cygwin, however I can't get it to work.
Note that I previously installed Leiningen outside of Cygwin (I was running it in Windows' normal shell).
What could be wrong with my setup, any ideas?
I use Leiningen via Cygwin with no problems.
Start over
Start over with a fresh copy of the lein script. There should be no need to edit it.
Set your PATH to include java
The easiest solution is to set your path in ~/.profile to include the path to Java's bin directory. Lein will then find java on the path and you'll have access to java and its related tools in your shell.
export JAVA_HOME="/cygdrive/c/Program Files/Java/jdk1.8.0_05/"
export PATH="${JAVA_HOME}/bin/:${PATH}"
Restart your shell or source ~/.profile. Verify that which java finds java command. And run java to verify you get the help output.
And/or explicitly set the LEIN_JAVA_CMD and JAVA_CMD variables
Alternatively, set the LEIN_JAVA_CMD and JAVA_CMD variables used by lein in your ~/.profile
export JAVA_HOME="/cygdrive/c/Program Files/Java/jdk1.8.0_05/"
export LEIN_JAVA_CMD="${JAVA_HOME}/bin/java"
export JAVA_CMD=`cygpath -w "${LEIN_JAVA_CMD}"`
Restart your shell or source ~/.profile.
Note: You can also set a separate LEIN_JVM_OPTS and JVM_OPTS if desired, but this should not be necessary.
If you have lein previously installed on Windows and want to reach it from cygwin, then do:
on cmd:
cd C:/Users/%userprofile%/.lein/bin
mklink lein lein.bat
on cygwin:
export CYGWIN=winsymlinks:nativestrict
I feel your pain. I tried something like this myself several years ago.
You have at least two problems. One is getting lein to run as under unix as you noted. There are really two lein scripts - one for unix, the other a batch script for use under windows.
Your bigger problem is java.exe - getting the windows java executable to behave as a cygwin shell, and particular the unix lein script running in a cygwin shell, expects is messy and fragile undertaking.
I would strongly recommend either using a clojure ide that supports Windows (perhaps LightTable) or installing a full linux virtual machine with the unix java SDK and doing clojure development in that environment. Ubuntu running on virtualbox is freely available and an option I have used in the past for just this purpose.
You need to create a symbolic link to the "lein.bat" file.so you use it properly in Cygwin.
Open CMD and go to the ".lein" path (cd %userprofile%\.lein\bin) and run this: mklink lein lein.bat
#a-webb is almost right ,but there are still some steps to complete.First,you will find a folder called “.lein” where you run the lein script in cygwin,go in,copy the folder "self-installs" inside to C:\Users\yourUserName.lein
,then,add C:\Users\yourUserName.lein\bin to the environment variable $Path.
I've found the easiest way is to:
Install via the windows binaries and
Copy the lein bash script into .lein/bin
Then it should just work in cygwin.
I have a project that runs on Ubuntu and Solaris. Fabric works fine with Ubuntu but does not on Solaris. If I try something inside a virtualenv it fails with workon: command not found.
This is how my fabfile.py looks like:
with prefix('workon %s' % env.virtualenv):
sudo('manage.py collectstatic --noinput')
I put those lines in .profile on both platforms:
export WORKON_HOME=$HOME/.virtualenvs
source /path/to/virtualenvwrapper.sh
That's all I've done. Why does Ubuntu work but Solaris doesn't? Any ideas?
It's Virtualenvwrapper that's failing, not Fabric or Virtualenv. Try using Virtualenv directly with:
with prefix('source path/to/virtualenv/bin/activate'):
sudo('manage.py collectstatic --noinput')
EDIT:
to try to fix virtualenvwrapper, try wrapping your code in the following, and see if it solves the original error.
with prefix('source path/to/virtualenvwrapper.sh'):
Consider where you have put the following?
export WORKON_HOME=/opt/virtual_envs
source /usr/local/bin/virtualenvwrapper.sh
According to man bash, the -l flag, that fabric issues, will cause the the following to happen
[bash] looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable.
I had this bootstrap code in .bashrc, which wasn't being sourced by bash -l. I moved those two lines to .profile, and can now do the fabric lines below. (I don't have .bash_profile or .bash_login)
with cd('/www/code'):
with prefix('workon code'):
run('./manage.py validate')