I'm trying to write a c++ program which gets an integer n (n>=1 && n<=100000) from the user and puts the sum of its digits into b. The output needed is the b-th prime number coming after n. I'm an absolute beginner in programming so I don't know what's wrong with the for loop or any other code that it doesn't show the correct output. For example the 3rd prime number after 12 (1+2=3) is 19 but the loop counts the prime numbers from 2 instead of 12, so it prints 7 as result.
#include <iostream>
using namespace std;
bool isPrime(int n)
{
if(n <= 1)
return false;
for(int i = 2; i <= (n/2); i++)
if(n % i == 0)
return false;
return true;
}
int main()
{
long int n;
int b = 0;
cin>>n;
while(n >= 1 && n <= 100000){
b += n % 10;
n /= 10;
}
for(int i = n, counter = b; counter <= 10; i++)
if(isPrime(i)){
counter++;
if(i > n)
cout<<counter<<"th prime number after n is : "<<i<<endl;
}
return 0;
}
So one of the possible solutions to my question, according to #Bob__ answer (and converting it to the code style I've used in the initial code) is as follows:
#include <iostream>
using namespace std;
bool isPrime(long int number)
{
if(number <= 1)
return false;
for(int i = 2; i <= (number / 2); i++)
if(number % i == 0)
return false;
return true;
}
int sumOfDigits(long int number)
{
int sum = 0;
while(number >= 1 && number <= 100000)
{
sum += number % 10;
number /= 10;
}
return sum;
}
long int bthPrimeAfter(int counter, long int number)
{
while(counter)
{
++number;
if(isPrime(number))
--counter;
}
return number;
}
int main()
{
long int number;
cin>>number;
int const counter = sumOfDigits(number);
cout<<bthPrimeAfter(counter, number)<<"\n";
return 0;
}
As dratenik said in their comment:
You have destroyed the value in n to produce b in the while loop. When the for loop comes around, n keeps being zero.
That's a key point to understand, sometimes we need to make a copy of a variable. One way to do that is passing it to a function by value. The function argument will be a local copy which can be changed without affecting the original one.
As an example, the main function could be written like the following:
#include <iostream>
bool is_prime(long int number);
// ^^^^^^^^ So is `n` in the OP's `main`
int sum_of_digits(long int number);
// ^^^^^^^^^^^^^^^ This is a local copy.
long int nth_prime_after(int counter, long int number);
int main()
{
long int number;
// The input validation (check if it's a number and if it's in the valid range,
// deal with errors) is left to the reader as an exercise.
std::cin >> number;
int const counter = sum_of_digits(number);
std::cout << nth_prime_after(counter, number) << '\n';
return 0;
}
The definition of sum_of_digits is straightforward.
int sum_of_digits(long int number)
{
int sum = 0;
while ( number ) // Stops when number is zero. The condition n <= 100000
{ // belongs to input validation, like n >= 0.
sum += number % 10;
number /= 10; // <- This changes only the local copy.
}
return sum;
}
About the last part (finding the nth prime after the chosen number), I'm not sure to understand what the asker is trying to do, but even if n had the correct value, for(int i = n, counter = b; counter <= 10; i++) would be just wrong. For starters, there's no reason for the condition count <= 10 or at least none that I can think of.
I'd write something like this:
long int nth_prime_after(int counter, long int number)
{
while ( counter )
{
++number;
if ( is_prime(number) )
{
--counter; // The primes aren't printed here, not even the nth.
}
}
return number; // Just return it, the printing is another function's
} // responsabilty.
A lot more could be said about the is_prime function and the overall (lack of) efficiency of this algorithm, but IMHO, it's beyond the scope of this answer.
I need to make a simple function in c++ that will say if an entered integer has its digits ascending from left to right. Ex, 123 is ascending. We just started learning recurssion, which is what I'm supposed to use, but I'm confused. So far what I was thinking is that you store the last digit as a temp, then compare that to the next digit, but how would you manage to do that?
bool ascending(int n) {
int temp = n % 10;
while (n / 10 > 0) {
n = n / 10;
if (temp > n % 10) {
return false;
break;
}
temp = n % 10;
}
}
This is the code I have so far, but I'm definitely messing up. I'm not even using recurrsion.
Here is one way you can go about it.
On every iteration, you check that last 2 digits are in order. And when the number is a single digit, return true
bool ascending(int n) {
int last_digit = n % 10;
int remainder = n / 10;
if (remainder == 0)
{
return true;
}
int second_last_digit = remainder % 10;
if (last_digit < second_last_digit)
{
return false;
}
else
{
return ascending(remainder); // Recusrive call
}
}
So, I started learning C++ recently. This code is trying to add the sum of the squares of each numbers digits. For example: 243: 2*2 + 4*4 + 3*3 = 29.
int sumOfSquareDigits(int n) //BUG WITH INPUT OF 10, 100, 1000, etc.
{
int digits = findDigits(n);
int number;
int remainder;
int *allDigits = new int[digits];
for (int i = 0; i < digits; i++) { //assigns digits to array
if (i + 1 == digits){ //sees if there is a ones value left
allDigits[i] = n;
}
else {
remainder = (n % findPower10(digits - (i + 1)));
number = ((n - remainder) / findPower10(digits - (i + 1)));
allDigits[i] = number; //records leftmost digit
n = n - (allDigits[i] * findPower10(digits - (i + 1))); //gets rid of leftmost number and starts over
}
}
int result = 0;
for (int i = 0; i < digits; i++) { //finds sum of squared digits
result = result + (allDigits[i] * allDigits[i]);
}
delete [] allDigits;
return result;
}
int findDigits(int n) //finds out how many digits the number has
{
int digits = 0;
int test;
do {
digits++;
test = findPower10(digits);
} while (n > test);
return digits;
}
int findPower10(int n) { //function for calculating powers of 10
int result = 1;
for (int i = 0; i < n; i++)
result = result * 10;
return result;
}
And after running the code, I've figured out that it (barely) mostly works. I've found that whenever a user inputs a value of 10, 100, 1000, etc. it always returns a value of 100. I'd like to solve this only using the iostream header.
Sorry if my code isn't too readable or organized! It would also be helpful if there are any shortcuts to my super long code, thanks!
The problem is in the findDigits function. For the values 10, 100, 1000 etc, it calculates the number of the digits minus one. This happens because of the comparison in the loop, you are stopping when n is less or equal to test, but in these cases n is equal test and you should run the next iteration.
So, you should change the line 33:
} while (n > test);
to:
} while (n >= test);
Now, it should work just fine. But it will not work for negative numbers (I don't know this is required, but the solution bellow works for that case too).
I came up with a much simpler solution:
int sumOfSquareDigits(int n)
{
// Variable to mantain the total sum of the squares
int sum = 0;
// This loop will change n until it is zero
while (n != 0) {
/// The current digit we will calculate the square is the rightmost digit,
// so we just get its value using the mod operator
int current = n % 10;
// Add its square to the sum
sum += current*current;
// You divide n by 10, this 'removes' one digit of n
n = n / 10;
}
return sum;
}
I found the problem challenging managed to reduce your code to the following lines:
long long sumOfSquareDigits(long long i) {
long long sum(0L);
do {
long long r = i % 10;
sum += (r * r);
} while(i /= 10);
return sum;
}
Haven't test it thoroughly but I think it works OK.
Write a recursive function to check how many digits in the number can be divided by the digit which is after them. Example: 84963 should return 2, because 8 can be divided by 4 and 6 can be divided by 3. My function doesnt seem to output anything at all.
#include <iostream>
using namespace std;
int fun (int n);
int main()
{
int n;
cin >> n;
cout << fun(n) << endl;
return 0;
}
int fun(int n){
int count = 0;
if (fun(n % 100) % fun(n % 10) == 0)
count++;
return count;
}
Your recursion does not make much sense at the moment. A more logical approach to this would be to see if the last number (so 1 in 321), can currently divide the second last number (so 2 in 321). You could do this by defining a function that checks if that is possible, and recursively passes on the number divided by 10. That function would look something like this:
int fun(int n)
{
if (n < 10)
return 0;
int last = n % 10;
n = n / 10;
int secondlast = n % 10;
if (secondlast != 0 && last != 0 && secondlast % last == 0)
return 1 + fun(n);
else
return fun(n);
}
Update note: After looking into Vlad from moscow's comment, I moved the last != 0 part of the condition forward, to solve a bug (divide by 0).
The problem Vlad from moscow was talking about is the following: If you want, for example, the part 04 to count as 0, you should use the code as it is above. Otherwise you should remove the secondlast != 0 part.
int countIfDiv(int num) {
int pair = num % 100;
int first = pair / 10;
if (first == 0) return 0;
int second = pair % 10;
int next = num / 10;
return first % second == 0 ? 1 + countIfDiv(next) : 0 + countIfDiv(next);
}
Just pull a pair, try the division, then chop the last number and repeat.
You're not actually updating n value so you get into an infinite loop, on the other hand, your function is, initially, only designed for 3 digits number. I think that it should be something similar to:
int fun(int n, int ant, int count){
if( n == 0 )
return count;
if (ant != 0 &&
(n%10) % ant == 0)
count++;
return fun(n/10, n%10, count);
}
I should work with different number of digits.
The valid code will be
size_t fun( int n )
{
const int base = 10;
int digit = n % base;
n /= base;
return ( n == 0 ?
0 :
( digit && n % base && !( n % base % digit ) ) + fun( n ) );
}
The sequence of triangle numbers is
generated by adding the natural
numbers. So the 7th triangle number
would be 1 + 2 + 3 + 4 + 5 + 6 + 7 =
28. The first ten terms would be:
1, 3, 6, 10, 15, 21, 28, 36, 45, 55,
...
Let us list the factors of the first
seven triangle numbers:
1: 1
3: 1,3
6: 1,2,3,6
10: 1,2,5,10
15: 1,3,5,15
21: 1,3,7,21
28: 1,2,4,7,14,28
We can see that 28 is the first
triangle number to have over five
divisors.
Given an integer n, display the first
triangle number having at least n
divisors.
Sample Input: 5
Output 28
Input Constraints: 1<=n<=320
I was obviously able to do this question, but I used a naive algorithm:
Get n.
Find triangle numbers and check their number of factors using the mod operator.
But the challenge was to show the output within 4 seconds of input. On high inputs like 190 and above it took almost 15-16 seconds. Then I tried to put the triangle numbers and their number of factors in a 2d array first and then get the input from the user and search the array. But somehow I couldn't do it: I got a lot of processor faults. Please try doing it with this method and paste the code. Or if there are any better ways, please tell me.
Here's a hint:
The number of divisors according to the Divisor function is the product of the power of each prime factor plus 1. For example, let's consider the exponential prime representation of 28:
28 = 22 * 30 * 50 * 71 * 110...
The product of each exponent plus one is: (2+1)*(0+1)*(0+1)*(1+1)*(0+1)... = 6, and sure enough, 28 has 6 divisors.
Now, consider that the nth triangular number can be computed in closed form as n(n+1)/2. We can multiply numbers written in the exponential prime form simply by adding up the exponents at each position. Dividing by two just means decrementing the exponent on the two's place.
Do you see where I'm going with this?
Well, you don't go into a lot of detail about what you did, but I can give you an optimization that can be used, if you didn't think of it...
If you're using the straightforward method of trying to find factors of a number n, by using the mod operator, you don't need to check all the numbers < n. That obviously would take n comparisons...you can just go up to floor(sqrt(n)). For each factor you find, just divide n by that number, and you'll get the conjugate value, and not need to find it manually.
For example: say n is 15.
We loop, and try 1 first. Yep, the mod checks out, so it's a factor. We divide n by the factor to get the conjugate value, so we do (15 / 1) = 15...so 15 is a factor.
We try 2 next. Nope. Then 3. Yep, which also gives us (15 / 3) = 5.
And we're done, because 4 is > floor(sqrt(n)). Quick!
If you didn't think of it, that might be something you could leverage to improve your times...overall you go from O(n) to O(sqrt (n)) which is pretty good (though for numbers this small, constants may still weigh heavily.)
I was in a programming competition way back in school where there was some similar question with a run time limit. the team that "solved" it did as follows:
1) solve it with a brute force slow method.
2) write a program to just print out the answer (you found using the slow method), which will run sub second.
I thought this was bogus, but they won.
see Triangular numbers: a(n) = C(n+1,2) = n(n+1)/2 = 0+1+2+...+n. (Formerly M2535 N1002)
then pick the language you want implement it in, see this:
"... Python
import math
def diminishing_returns(val, scale):
if val < 0:
return -diminishing_returns(-val, scale)
mult = val / float(scale)
trinum = (math.sqrt(8.0 * mult + 1.0) - 1.0) / 2.0
return trinum * scale
..."
First, create table with two columns: Triangle_Number Count_of_Factors.
Second, derive from this a table with the same columns, but consisting only of the 320 rows of the lowest triangle number with a distinct number of factors.
Perform your speedy lookup to the second table.
If you solved the problem, you should be able to access the thread on Project Euler in which people post their (some very efficient) solutions.
If you're going to copy and paste a problem, please cite the source (unless it was your teacher who stole it); and I second Wouter van Niferick's comment.
Well, at least you got a good professor. Performance is important.
Since you have a program that can do the job, you can precalculate all of the answers for 1 .. 320.
Store them in an array, then simply subscript into the array to get the answer. That will be very fast.
Compile with care, winner of worst code of the year :D
#include <iostream>
bool isPrime( unsigned long long number ){
if( number != 2 && number % 2 == 0 )
return false;
for( int i = 3;
i < static_cast<unsigned long long>
( sqrt(static_cast<double>(number)) + 1 )
; i += 2 ){
if( number % i == 0 )
return false;
}
return true;
}
unsigned int p;
unsigned long long primes[1024];
void initPrimes(){
primes[0] = 2;
primes[1] = 3;
unsigned long long number = 5;
for( unsigned int i = 2; i < 1024; i++ ){
while( !isPrime(number) )
number += 2;
primes[i] = number;
number += 2;
}
return;
}
unsigned long long nextPrime(){
unsigned int ret = p;
p++;
return primes[ret];
}
unsigned long long numOfDivs( unsigned long long number ){
p = 0;
std::vector<unsigned long long> v;
unsigned long long prime = nextPrime(), divs = 1, i = 0;
while( number >= prime ){
i = 0;
while( number % prime == 0 ){
number /= prime;
i++;
}
if( i )
v.push_back( i );
prime = nextPrime();
}
for( unsigned n = 0; n < v.size(); n++ )
divs *= (v[n] + 1);
return divs;
}
unsigned long long nextTriNumber(){
static unsigned long long triNumber = 1, next = 2;
unsigned long long retTri = triNumber;
triNumber += next;
next++;
return retTri;
}
int main()
{
initPrimes();
unsigned long long n = nextTriNumber();
unsigned long long divs = 500;
while( numOfDivs(n) <= divs )
n = nextTriNumber();
std::cout << n;
std::cin.get();
}
def first_triangle_number_with_over_N_divisors(N):
n = 4
primes = [2, 3]
fact = [None, None, {2:1}, {3:1}]
def num_divisors (x):
num = 1
for mul in fact[x].values():
num *= (mul+1)
return num
while True:
factn = {}
for p in primes:
if p > n//2: break
r = n // p
if r * p == n:
factn = fact[r].copy()
factn[p] = factn.get(p,0) + 1
if len(factn)==0:
primes.append(n)
factn[n] = 1
fact.append(factn)
(x, y) = (n-1, n//2) if n % 2 == 0 else (n, (n-1)//2)
numdiv = num_divisors(x) * num_divisors(y)
if numdiv >= N:
print('Triangle number %d: %d divisors'
%(x*y, numdiv))
break
n += 1
>>> first_triangle_number_with_over_N_divisors(500)
Triangle number 76576500: 576 divisors
Dude here is ur code, go have a look. It calculates the first number that has divisors greater than 500.
void main() {
long long divisors = 0;
long long nat_num = 0;
long long tri_num = 0;
int tri_sqrt = 0;
while (1) {
divisors = 0;
nat_num++;
tri_num = nat_num + tri_num;
tri_sqrt = floor(sqrt((double)tri_num));
long long i = 0;
for ( i=tri_sqrt; i>=1; i--) {
long long remainder = tri_num % i;
if ( remainder == 0 && tri_num == 1 ) {
divisors++;
}
else if (remainder == 0 && tri_num != 1) {
divisors++;
divisors++;
}
}
if (divisors >100) {
cout <<"No. of divisors: "<<divisors<<endl<<tri_num<<endl;
}
if (divisors > 500)
break;
}
cout<<"Final Result: "<<tri_num<<endl;
system("pause");
}
Boojum's answer motivated me to write this little program. It seems to work well, although it does use a brute force method of computing primes. It's neat how all the natural numbers can be broken down into prime number components.
#include <stdio.h>
#include <stdlib.h>
#include <iostream>
#include <iomanip>
#include <vector>
//////////////////////////////////////////////////////////////////////////////
typedef std::vector<size_t> uint_vector;
//////////////////////////////////////////////////////////////////////////////
// add a prime number to primes[]
void
primeAdd(uint_vector& primes)
{
size_t n;
if (primes.empty())
{
primes.push_back(2);
return;
}
for (n = *(--primes.end()) + 1; ; ++n)
{
// n is even -> not prime
if ((n & 1) == 0) continue;
// look for a divisor in [2,n)
for (size_t i = 2; i < n; ++i)
{
if ((n % i) == 0) continue;
}
// found a prime
break;
}
primes.push_back(n);
}
//////////////////////////////////////////////////////////////////////////////
void
primeFactorize(size_t n, uint_vector& primes, uint_vector& f)
{
f.clear();
for (size_t i = 0; n > 1; ++i)
{
while (primes.size() <= i) primeAdd(primes);
while (f.size() <= i) f.push_back(0);
while ((n % primes[i]) == 0)
{
++f[i];
n /= primes[i];
}
}
}
//////////////////////////////////////////////////////////////////////////////
int
main(int argc, char** argv)
{
// allow specifying number of TN's to be evaluated
size_t lim = 1000;
if (argc > 1)
{
lim = atoi(argv[1]);
}
if (lim == 0) lim = 1000;
// prime numbers
uint_vector primes;
// factors of (n), (n + 1)
uint_vector* f = new uint_vector();
uint_vector* f1 = new uint_vector();
// sum vector
uint_vector sum;
// prime factorize (n)
size_t n = 1;
primeFactorize(n, primes, *f);
// iterate over triangle-numbers
for (; n <= lim; ++n)
{
// prime factorize (n + 1)
primeFactorize(n + 1, primes, *f1);
while (f->size() < f1->size()) f->push_back(0);
while (f1->size() < f->size()) f1->push_back(0);
size_t numTerms = f->size();
// compute prime factors for (n * (n + 1) / 2)
sum.clear();
size_t i;
for (i = 0; i < numTerms; ++i)
{
sum.push_back((*f)[i] + (*f1)[i]);
}
--sum[0];
size_t numFactors = 1, tn = 1;
for (i = 0; i < numTerms; ++i)
{
size_t exp = sum[i];
numFactors *= (exp + 1);
while (exp-- != 0) tn *= primes[i];
}
std::cout
<< n << ". Triangle number "
<< tn << " has " << numFactors << " factors."
<< std::endl;
// prepare for next iteration
f->clear();
uint_vector* tmp = f;
f = f1;
f1 = tmp;
}
delete f;
delete f1;
return 0;
}