Split string by . but ignore whats inside [] - regex

I have a string:
s='articles[zone.id=1].comments[user.status=active].user'
Looking to split (via split(some_regex_here)). The split needs to occur on every period other than those inside the bracketed substring.
Expected output:
["articles[zone.id=1]", "comments[user.status=active]", "user"]
How would I go about this? Or is there something else besides split(), I should be looking at?

Try this,
s.split(/\.(?![^\[]*\])/)
I got this result,
2.3.2 :061 > s.split(/\.(?![^\[]*\])/)
=> ["articles[zone.id=1]", "comments[user.status=active]", "user"]
You can also test it here:
https://rubular.com/r/LaxEFQZJ0ygA3j

I assume the problem is to split on periods that are not within matching brackets.
Here is a non-regex solution that works with any number of nested brackets. I've assumed the brackets are all matched, but it would not be difficult to check that.
def split_it(s)
left_brackets = 0
s.each_char.with_object(['']) do |c,a|
if c == '.' && left_brackets.zero?
a << '' unless a.last.empty?
else
case c
when ']' then left_brackets -= 1
when '[' then left_brackets += 1
end
a.last << c
end
end.tap { |a| a.pop if a.last.empty? }
end
split_it '.articles[zone.id=[user.loc=1]].comments[user.status=active].user'
#=> ["articles[zone.id=[user.loc=1]]", "comments[user.status=active]", "user"]

Related

Shorten Code Logic For String Manipulation

Examples
"123456" would be ["123", "456"].
"1234567891011" would be ["123", "456", "789", "10", "11"].
I have come up with this logic using regex to solve the challenge but I am being asked if there is a way to make the logic shorter.
def ft(str)
end
The result from the scan gives a lot of whitespaces so after the join operation, I am left with either a double dash or triple dashes so I used this .gsub(/-+/, '-') to fix that. I also noticed sometimes there is a dash at the begin or the end of the string, so I used .gsub(/^-|-$/, '') to fix that too
Any Ideas?
Slice the string in chunks of max 3 digits. (s.scan(/.{1,3}/)
Check if the last chunk has only 1 character. If so, take the last char of the chunk before and prepend it to the last.
Glue the chunks together using join(" ")
Inspired by #steenslag's recommendation. (There are quite a few other ways to achieve the same with varying levels of verbosity and esotericism)
Here is how I would go about it:
def format_str(str)
numbers = str.delete("^0-9").scan(/.{1,3}/)
# there are a number of ways this operation can be performed
numbers.concat(numbers.pop(2).join.scan(/../)) if numbers.last.length == 1
numbers.join('-')
end
Breakdown:
numbers = str.delete("^0-9") - delete any non numeric character from the string
.scan(/.{1,3}/) - scan them into groups of 1 to 3 characters
numbers.concat(numbers.pop(2).join.scan(/../)) if numbers.last.length == 1 - If the last element has a length of 1 then remove the last 2 elements join them and then scan them into groups of 2 and add these groups back to the Array
numbers.join('-') - join the numbers with a hyphen to return a formatted String
Example:
require 'securerandom'
10.times do
s = SecureRandom.hex
puts "Original: #{s} => Formatted: #{format_str(s)}"
end
# Original: fd1bbce41b1c784ce6ad5303d868bbe9 => Formatted: 141-178-465-303-86-89
# Original: af04bd4d4d6beb5a0412a692d5d3d42d => Formatted: 044-465-041-269-253-42
# Original: 9a1833a43cbef51c3f3c21baa66fe996 => Formatted: 918-334-351-332-166-996
# Original: 4104ae13c998cec896997b9919bdafb3 => Formatted: 410-413-998-896-997-991-93
# Original: 0eb49065472240ba32b3c029f897b30d => Formatted: 049-065-472-240-323-029-897-30
# Original: 4c68f9f68e8f6132c0ed5b966d639cf4 => Formatted: 468-968-861-320-596-663-94
# Original: 65987ee04aea8fb533dbe38c0fea7d63 => Formatted: 659-870-485-333-807-63
# Original: aa8aaf1cf59b52c9ad7db6d4b1ae0cbb => Formatted: 815-952-976-410
# Original: 8eb6b457059f91fd06ccbac272db8f4e => Formatted: 864-570-599-106-272-84
# Original: 1c65825ed59dcdc6ec18af969938ea57 => Formatted: 165-825-596-189-699-38-57
That being said to modify your existing code this will work as well:
def format_str(str)
str
.delete("^0-9")
.scan(/(?=\d{5})\d{3}|(?=\d{3}$)\d{3}|\d{2}/)
.join('-')
end
Here are three more ways to do that.
Use String#scan with a regular expression
def fmt(str)
str.delete("^0-9").scan(/\d{2,3}(?!\d\z)/)
end
The regular expression reads, "match two or three digits provided they are not followed by a single digit at the end of the string". (?!\d\z) is a negative lookahead (which is not part of the match). As matches are greedy by default, the regex engine will always match three digits if possible.
Solve by recursion
def fmt(str)
recurse(str.delete("^0-9"))
end
def recurse(s)
case s.size
when 2,3
[s]
when 4
[s[0,2], s[2,2]]
else
[s[0,3], *fmt(s[3..])]
end
end
Determine the last two matches from the size of the string
def fmt(str)
s = str.delete("^0-9")
if s.size % 3 == 1
s[0..-5].scan(/\d{3}/) << s[-4,2] << s[-2,2]
else
s.scan(/\d{2,3}/)
end
end
All methods exhibit the following behaviour.
["5551231234", "18883319", "123456", "1234567891011"].each do |str|
puts "#{str}: #{fmt(str)}"
end
5551231234: ["555", "123", "12", "34"]
18883319: ["188", "833", "19"]
123456: ["123", "456"]
1234567891011: ["123", "456", "789", "10", "11"]
An approach:
def foo(s)
s.gsub(/\D/, '').scan(/\d{1,3}/).each_with_object([]) do |x, arr|
if x.size == 3 || arr == []
arr << x
else
y = arr.last
arr[-1] = y[0...-1]
arr << "#{y[-1]}#{x}"
end
end
end
Remove all non-digits characters, then scan for 1 to 3 digit chunks. Iterate over them. If it's the first time through or the chunk is three digits, add it to the array. If it isn't, take the last digit from the previous chunk and prepend it to the current chunk and add that to the array.
Alternatively, without generating a new array.
def foo(s)
s.gsub(/\D/, '').scan(/\d{1,3}/).instance_eval do |y|
y.each_with_index do |x, i|
if x.size == 1
y[i] = "#{y[i-1][-1]}#{x}"
y[i-1] = y[i-1][0...-1]
end
end
end
end
Without changing your code too much and without adjusting your actual regex, I might suggest replacing scan with split in order to avoid all the extra nil values; replacing gsub with tr which is much faster; and then using reject(&:empty?) to loop through and remove any blank array elements before joining with whatever character you want:
string = "12345fg\n\t\t\t 67"
string.tr("^0-9", "")
.split(/(?=\d{5})(\d{3})|(?=\d{3}$)(\d{3})|(\d{1,2})/)
.reject(&:empty?)
.join("-")
#=> 123-45-67
Not suggesting this is the best approach, but wanted to offer a little food for thought:
You can basically reduce the logic for your challenge to test for 1 single condition and to use 2 very simple pattern matches:
Condition to test for: Number of characters is more than 3 and has a modulo(3) of 1. This condition will require the use of both pattern matches.
All other conditions will use a single pattern match so no reason to test for those.
This could probably be made a little less verbose but it’s all spelled out pretty well for clarity:
def format(s)
n = s.delete("^0-9")
regex_1 = /.{1,3}/
regex_2 = /../
if [n.length-3, 0].max.modulo(3) == 1
a = n[0..-5].scan(regex_1)+n[-4..-1].scan(regex_2)
else a=n.scan(regex_1)
end
a.join("-")
end

Regular Expression: match and count "A" and stop after found "B" by counted times [duplicate]

I need a regular expression to select all the text between two outer brackets.
Example:
START_TEXT(text here(possible text)text(possible text(more text)))END_TXT
^ ^
Result:
(text here(possible text)text(possible text(more text)))
I want to add this answer for quickreference. Feel free to update.
.NET Regex using balancing groups:
\((?>\((?<c>)|[^()]+|\)(?<-c>))*(?(c)(?!))\)
Where c is used as the depth counter.
Demo at Regexstorm.com
Stack Overflow: Using RegEx to balance match parenthesis
Wes' Puzzling Blog: Matching Balanced Constructs with .NET Regular Expressions
Greg Reinacker's Weblog: Nested Constructs in Regular Expressions
PCRE using a recursive pattern:
\((?:[^)(]+|(?R))*+\)
Demo at regex101; Or without alternation:
\((?:[^)(]*(?R)?)*+\)
Demo at regex101; Or unrolled for performance:
\([^)(]*+(?:(?R)[^)(]*)*+\)
Demo at regex101; The pattern is pasted at (?R) which represents (?0).
Perl, PHP, Notepad++, R: perl=TRUE, Python: PyPI regex module with (?V1) for Perl behaviour.
(the new version of PyPI regex package already defaults to this → DEFAULT_VERSION = VERSION1)
Ruby using subexpression calls:
With Ruby 2.0 \g<0> can be used to call full pattern.
\((?>[^)(]+|\g<0>)*\)
Demo at Rubular; Ruby 1.9 only supports capturing group recursion:
(\((?>[^)(]+|\g<1>)*\))
Demo at Rubular  (atomic grouping since Ruby 1.9.3)
JavaScript  API :: XRegExp.matchRecursive
XRegExp.matchRecursive(str, '\\(', '\\)', 'g');
Java: An interesting idea using forward references by #jaytea.
Without recursion up to 3 levels of nesting:
(JS, Java and other regex flavors)
To prevent runaway if unbalanced, with * on innermost [)(] only.
\((?:[^)(]|\((?:[^)(]|\((?:[^)(]|\([^)(]*\))*\))*\))*\)
Demo at regex101; Or unrolled for better performance (preferred).
\([^)(]*(?:\([^)(]*(?:\([^)(]*(?:\([^)(]*\)[^)(]*)*\)[^)(]*)*\)[^)(]*)*\)
Demo at regex101; Deeper nesting needs to be added as required.
Reference - What does this regex mean?
RexEgg.com - Recursive Regular Expressions
Regular-Expressions.info - Regular Expression Recursion
Mastering Regular Expressions - Jeffrey E.F. Friedl 1 2 3 4
Regular expressions are the wrong tool for the job because you are dealing with nested structures, i.e. recursion.
But there is a simple algorithm to do this, which I described in more detail in this answer to a previous question. The gist is to write code which scans through the string keeping a counter of the open parentheses which have not yet been matched by a closing parenthesis. When that counter returns to zero, then you know you've reached the final closing parenthesis.
You can use regex recursion:
\(([^()]|(?R))*\)
[^\(]*(\(.*\))[^\)]*
[^\(]* matches everything that isn't an opening bracket at the beginning of the string, (\(.*\)) captures the required substring enclosed in brackets, and [^\)]* matches everything that isn't a closing bracket at the end of the string. Note that this expression does not attempt to match brackets; a simple parser (see dehmann's answer) would be more suitable for that.
This answer explains the theoretical limitation of why regular expressions are not the right tool for this task.
Regular expressions can not do this.
Regular expressions are based on a computing model known as Finite State Automata (FSA). As the name indicates, a FSA can remember only the current state, it has no information about the previous states.
In the above diagram, S1 and S2 are two states where S1 is the starting and final step. So if we try with the string 0110 , the transition goes as follows:
0 1 1 0
-> S1 -> S2 -> S2 -> S2 ->S1
In the above steps, when we are at second S2 i.e. after parsing 01 of 0110, the FSA has no information about the previous 0 in 01 as it can only remember the current state and the next input symbol.
In the above problem, we need to know the no of opening parenthesis; this means it has to be stored at some place. But since FSAs can not do that, a regular expression can not be written.
However, an algorithm can be written to do this task. Algorithms are generally falls under Pushdown Automata (PDA). PDA is one level above of FSA. PDA has an additional stack to store some additional information. PDAs can be used to solve the above problem, because we can 'push' the opening parenthesis in the stack and 'pop' them once we encounter a closing parenthesis. If at the end, stack is empty, then opening parenthesis and closing parenthesis matches. Otherwise not.
(?<=\().*(?=\))
If you want to select text between two matching parentheses, you are out of luck with regular expressions. This is impossible(*).
This regex just returns the text between the first opening and the last closing parentheses in your string.
(*) Unless your regex engine has features like balancing groups or recursion. The number of engines that support such features is slowly growing, but they are still not a commonly available.
It is actually possible to do it using .NET regular expressions, but it is not trivial, so read carefully.
You can read a nice article here. You also may need to read up on .NET regular expressions. You can start reading here.
Angle brackets <> were used because they do not require escaping.
The regular expression looks like this:
<
[^<>]*
(
(
(?<Open><)
[^<>]*
)+
(
(?<Close-Open>>)
[^<>]*
)+
)*
(?(Open)(?!))
>
I was also stuck in this situation when dealing with nested patterns and regular-expressions is the right tool to solve such problems.
/(\((?>[^()]+|(?1))*\))/
This is the definitive regex:
\(
(?<arguments>
(
([^\(\)']*) |
(\([^\(\)']*\)) |
'(.*?)'
)*
)
\)
Example:
input: ( arg1, arg2, arg3, (arg4), '(pip' )
output: arg1, arg2, arg3, (arg4), '(pip'
note that the '(pip' is correctly managed as string.
(tried in regulator: http://sourceforge.net/projects/regulator/)
I have written a little JavaScript library called balanced to help with this task. You can accomplish this by doing
balanced.matches({
source: source,
open: '(',
close: ')'
});
You can even do replacements:
balanced.replacements({
source: source,
open: '(',
close: ')',
replace: function (source, head, tail) {
return head + source + tail;
}
});
Here's a more complex and interactive example JSFiddle.
Adding to bobble bubble's answer, there are other regex flavors where recursive constructs are supported.
Lua
Use %b() (%b{} / %b[] for curly braces / square brackets):
for s in string.gmatch("Extract (a(b)c) and ((d)f(g))", "%b()") do print(s) end (see demo)
Raku (former Perl6):
Non-overlapping multiple balanced parentheses matches:
my regex paren_any { '(' ~ ')' [ <-[()]>+ || <&paren_any> ]* }
say "Extract (a(b)c) and ((d)f(g))" ~~ m:g/<&paren_any>/;
# => (「(a(b)c)」 「((d)f(g))」)
Overlapping multiple balanced parentheses matches:
say "Extract (a(b)c) and ((d)f(g))" ~~ m:ov:g/<&paren_any>/;
# => (「(a(b)c)」 「(b)」 「((d)f(g))」 「(d)」 「(g)」)
See demo.
Python re non-regex solution
See poke's answer for How to get an expression between balanced parentheses.
Java customizable non-regex solution
Here is a customizable solution allowing single character literal delimiters in Java:
public static List<String> getBalancedSubstrings(String s, Character markStart,
Character markEnd, Boolean includeMarkers)
{
List<String> subTreeList = new ArrayList<String>();
int level = 0;
int lastOpenDelimiter = -1;
for (int i = 0; i < s.length(); i++) {
char c = s.charAt(i);
if (c == markStart) {
level++;
if (level == 1) {
lastOpenDelimiter = (includeMarkers ? i : i + 1);
}
}
else if (c == markEnd) {
if (level == 1) {
subTreeList.add(s.substring(lastOpenDelimiter, (includeMarkers ? i + 1 : i)));
}
if (level > 0) level--;
}
}
return subTreeList;
}
}
Sample usage:
String s = "some text(text here(possible text)text(possible text(more text)))end text";
List<String> balanced = getBalancedSubstrings(s, '(', ')', true);
System.out.println("Balanced substrings:\n" + balanced);
// => [(text here(possible text)text(possible text(more text)))]
The regular expression using Ruby (version 1.9.3 or above):
/(?<match>\((?:\g<match>|[^()]++)*\))/
Demo on rubular
The answer depends on whether you need to match matching sets of brackets, or merely the first open to the last close in the input text.
If you need to match matching nested brackets, then you need something more than regular expressions. - see #dehmann
If it's just first open to last close see #Zach
Decide what you want to happen with:
abc ( 123 ( foobar ) def ) xyz ) ghij
You need to decide what your code needs to match in this case.
"""
Here is a simple python program showing how to use regular
expressions to write a paren-matching recursive parser.
This parser recognises items enclosed by parens, brackets,
braces and <> symbols, but is adaptable to any set of
open/close patterns. This is where the re package greatly
assists in parsing.
"""
import re
# The pattern below recognises a sequence consisting of:
# 1. Any characters not in the set of open/close strings.
# 2. One of the open/close strings.
# 3. The remainder of the string.
#
# There is no reason the opening pattern can't be the
# same as the closing pattern, so quoted strings can
# be included. However quotes are not ignored inside
# quotes. More logic is needed for that....
pat = re.compile("""
( .*? )
( \( | \) | \[ | \] | \{ | \} | \< | \> |
\' | \" | BEGIN | END | $ )
( .* )
""", re.X)
# The keys to the dictionary below are the opening strings,
# and the values are the corresponding closing strings.
# For example "(" is an opening string and ")" is its
# closing string.
matching = { "(" : ")",
"[" : "]",
"{" : "}",
"<" : ">",
'"' : '"',
"'" : "'",
"BEGIN" : "END" }
# The procedure below matches string s and returns a
# recursive list matching the nesting of the open/close
# patterns in s.
def matchnested(s, term=""):
lst = []
while True:
m = pat.match(s)
if m.group(1) != "":
lst.append(m.group(1))
if m.group(2) == term:
return lst, m.group(3)
if m.group(2) in matching:
item, s = matchnested(m.group(3), matching[m.group(2)])
lst.append(m.group(2))
lst.append(item)
lst.append(matching[m.group(2)])
else:
raise ValueError("After <<%s %s>> expected %s not %s" %
(lst, s, term, m.group(2)))
# Unit test.
if __name__ == "__main__":
for s in ("simple string",
""" "double quote" """,
""" 'single quote' """,
"one'two'three'four'five'six'seven",
"one(two(three(four)five)six)seven",
"one(two(three)four)five(six(seven)eight)nine",
"one(two)three[four]five{six}seven<eight>nine",
"one(two[three{four<five>six}seven]eight)nine",
"oneBEGINtwo(threeBEGINfourENDfive)sixENDseven",
"ERROR testing ((( mismatched ))] parens"):
print "\ninput", s
try:
lst, s = matchnested(s)
print "output", lst
except ValueError as e:
print str(e)
print "done"
You need the first and last parentheses. Use something like this:
str.indexOf('('); - it will give you first occurrence
str.lastIndexOf(')'); - last one
So you need a string between,
String searchedString = str.substring(str1.indexOf('('),str1.lastIndexOf(')');
because js regex doesn't support recursive match, i can't make balanced parentheses matching work.
so this is a simple javascript for loop version that make "method(arg)" string into array
push(number) map(test(a(a()))) bass(wow, abc)
$$(groups) filter({ type: 'ORGANIZATION', isDisabled: { $ne: true } }) pickBy(_id, type) map(test()) as(groups)
const parser = str => {
let ops = []
let method, arg
let isMethod = true
let open = []
for (const char of str) {
// skip whitespace
if (char === ' ') continue
// append method or arg string
if (char !== '(' && char !== ')') {
if (isMethod) {
(method ? (method += char) : (method = char))
} else {
(arg ? (arg += char) : (arg = char))
}
}
if (char === '(') {
// nested parenthesis should be a part of arg
if (!isMethod) arg += char
isMethod = false
open.push(char)
} else if (char === ')') {
open.pop()
// check end of arg
if (open.length < 1) {
isMethod = true
ops.push({ method, arg })
method = arg = undefined
} else {
arg += char
}
}
}
return ops
}
// const test = parser(`$$(groups) filter({ type: 'ORGANIZATION', isDisabled: { $ne: true } }) pickBy(_id, type) map(test()) as(groups)`)
const test = parser(`push(number) map(test(a(a()))) bass(wow, abc)`)
console.log(test)
the result is like
[ { method: 'push', arg: 'number' },
{ method: 'map', arg: 'test(a(a()))' },
{ method: 'bass', arg: 'wow,abc' } ]
[ { method: '$$', arg: 'groups' },
{ method: 'filter',
arg: '{type:\'ORGANIZATION\',isDisabled:{$ne:true}}' },
{ method: 'pickBy', arg: '_id,type' },
{ method: 'map', arg: 'test()' },
{ method: 'as', arg: 'groups' } ]
While so many answers mention this in some form by saying that regex does not support recursive matching and so on, the primary reason for this lies in the roots of the Theory of Computation.
Language of the form {a^nb^n | n>=0} is not regular. Regex can only match things that form part of the regular set of languages.
Read more # here
I didn't use regex since it is difficult to deal with nested code. So this snippet should be able to allow you to grab sections of code with balanced brackets:
def extract_code(data):
""" returns an array of code snippets from a string (data)"""
start_pos = None
end_pos = None
count_open = 0
count_close = 0
code_snippets = []
for i,v in enumerate(data):
if v =='{':
count_open+=1
if not start_pos:
start_pos= i
if v=='}':
count_close +=1
if count_open == count_close and not end_pos:
end_pos = i+1
if start_pos and end_pos:
code_snippets.append((start_pos,end_pos))
start_pos = None
end_pos = None
return code_snippets
I used this to extract code snippets from a text file.
This do not fully address the OP question but I though it may be useful to some coming here to search for nested structure regexp:
Parse parmeters from function string (with nested structures) in javascript
Match structures like:
matches brackets, square brackets, parentheses, single and double quotes
Here you can see generated regexp in action
/**
* get param content of function string.
* only params string should be provided without parentheses
* WORK even if some/all params are not set
* #return [param1, param2, param3]
*/
exports.getParamsSAFE = (str, nbParams = 3) => {
const nextParamReg = /^\s*((?:(?:['"([{](?:[^'"()[\]{}]*?|['"([{](?:[^'"()[\]{}]*?|['"([{][^'"()[\]{}]*?['")}\]])*?['")}\]])*?['")}\]])|[^,])*?)\s*(?:,|$)/;
const params = [];
while (str.length) { // this is to avoid a BIG performance issue in javascript regexp engine
str = str.replace(nextParamReg, (full, p1) => {
params.push(p1);
return '';
});
}
return params;
};
This might help to match balanced parenthesis.
\s*\w+[(][^+]*[)]\s*
This one also worked
re.findall(r'\(.+\)', s)

Regexp word between the braces [duplicate]

I need a regular expression to select all the text between two outer brackets.
Example:
START_TEXT(text here(possible text)text(possible text(more text)))END_TXT
^ ^
Result:
(text here(possible text)text(possible text(more text)))
I want to add this answer for quickreference. Feel free to update.
.NET Regex using balancing groups:
\((?>\((?<c>)|[^()]+|\)(?<-c>))*(?(c)(?!))\)
Where c is used as the depth counter.
Demo at Regexstorm.com
Stack Overflow: Using RegEx to balance match parenthesis
Wes' Puzzling Blog: Matching Balanced Constructs with .NET Regular Expressions
Greg Reinacker's Weblog: Nested Constructs in Regular Expressions
PCRE using a recursive pattern:
\((?:[^)(]+|(?R))*+\)
Demo at regex101; Or without alternation:
\((?:[^)(]*(?R)?)*+\)
Demo at regex101; Or unrolled for performance:
\([^)(]*+(?:(?R)[^)(]*)*+\)
Demo at regex101; The pattern is pasted at (?R) which represents (?0).
Perl, PHP, Notepad++, R: perl=TRUE, Python: PyPI regex module with (?V1) for Perl behaviour.
(the new version of PyPI regex package already defaults to this → DEFAULT_VERSION = VERSION1)
Ruby using subexpression calls:
With Ruby 2.0 \g<0> can be used to call full pattern.
\((?>[^)(]+|\g<0>)*\)
Demo at Rubular; Ruby 1.9 only supports capturing group recursion:
(\((?>[^)(]+|\g<1>)*\))
Demo at Rubular  (atomic grouping since Ruby 1.9.3)
JavaScript  API :: XRegExp.matchRecursive
XRegExp.matchRecursive(str, '\\(', '\\)', 'g');
Java: An interesting idea using forward references by #jaytea.
Without recursion up to 3 levels of nesting:
(JS, Java and other regex flavors)
To prevent runaway if unbalanced, with * on innermost [)(] only.
\((?:[^)(]|\((?:[^)(]|\((?:[^)(]|\([^)(]*\))*\))*\))*\)
Demo at regex101; Or unrolled for better performance (preferred).
\([^)(]*(?:\([^)(]*(?:\([^)(]*(?:\([^)(]*\)[^)(]*)*\)[^)(]*)*\)[^)(]*)*\)
Demo at regex101; Deeper nesting needs to be added as required.
Reference - What does this regex mean?
RexEgg.com - Recursive Regular Expressions
Regular-Expressions.info - Regular Expression Recursion
Mastering Regular Expressions - Jeffrey E.F. Friedl 1 2 3 4
Regular expressions are the wrong tool for the job because you are dealing with nested structures, i.e. recursion.
But there is a simple algorithm to do this, which I described in more detail in this answer to a previous question. The gist is to write code which scans through the string keeping a counter of the open parentheses which have not yet been matched by a closing parenthesis. When that counter returns to zero, then you know you've reached the final closing parenthesis.
You can use regex recursion:
\(([^()]|(?R))*\)
[^\(]*(\(.*\))[^\)]*
[^\(]* matches everything that isn't an opening bracket at the beginning of the string, (\(.*\)) captures the required substring enclosed in brackets, and [^\)]* matches everything that isn't a closing bracket at the end of the string. Note that this expression does not attempt to match brackets; a simple parser (see dehmann's answer) would be more suitable for that.
This answer explains the theoretical limitation of why regular expressions are not the right tool for this task.
Regular expressions can not do this.
Regular expressions are based on a computing model known as Finite State Automata (FSA). As the name indicates, a FSA can remember only the current state, it has no information about the previous states.
In the above diagram, S1 and S2 are two states where S1 is the starting and final step. So if we try with the string 0110 , the transition goes as follows:
0 1 1 0
-> S1 -> S2 -> S2 -> S2 ->S1
In the above steps, when we are at second S2 i.e. after parsing 01 of 0110, the FSA has no information about the previous 0 in 01 as it can only remember the current state and the next input symbol.
In the above problem, we need to know the no of opening parenthesis; this means it has to be stored at some place. But since FSAs can not do that, a regular expression can not be written.
However, an algorithm can be written to do this task. Algorithms are generally falls under Pushdown Automata (PDA). PDA is one level above of FSA. PDA has an additional stack to store some additional information. PDAs can be used to solve the above problem, because we can 'push' the opening parenthesis in the stack and 'pop' them once we encounter a closing parenthesis. If at the end, stack is empty, then opening parenthesis and closing parenthesis matches. Otherwise not.
(?<=\().*(?=\))
If you want to select text between two matching parentheses, you are out of luck with regular expressions. This is impossible(*).
This regex just returns the text between the first opening and the last closing parentheses in your string.
(*) Unless your regex engine has features like balancing groups or recursion. The number of engines that support such features is slowly growing, but they are still not a commonly available.
It is actually possible to do it using .NET regular expressions, but it is not trivial, so read carefully.
You can read a nice article here. You also may need to read up on .NET regular expressions. You can start reading here.
Angle brackets <> were used because they do not require escaping.
The regular expression looks like this:
<
[^<>]*
(
(
(?<Open><)
[^<>]*
)+
(
(?<Close-Open>>)
[^<>]*
)+
)*
(?(Open)(?!))
>
I was also stuck in this situation when dealing with nested patterns and regular-expressions is the right tool to solve such problems.
/(\((?>[^()]+|(?1))*\))/
This is the definitive regex:
\(
(?<arguments>
(
([^\(\)']*) |
(\([^\(\)']*\)) |
'(.*?)'
)*
)
\)
Example:
input: ( arg1, arg2, arg3, (arg4), '(pip' )
output: arg1, arg2, arg3, (arg4), '(pip'
note that the '(pip' is correctly managed as string.
(tried in regulator: http://sourceforge.net/projects/regulator/)
I have written a little JavaScript library called balanced to help with this task. You can accomplish this by doing
balanced.matches({
source: source,
open: '(',
close: ')'
});
You can even do replacements:
balanced.replacements({
source: source,
open: '(',
close: ')',
replace: function (source, head, tail) {
return head + source + tail;
}
});
Here's a more complex and interactive example JSFiddle.
Adding to bobble bubble's answer, there are other regex flavors where recursive constructs are supported.
Lua
Use %b() (%b{} / %b[] for curly braces / square brackets):
for s in string.gmatch("Extract (a(b)c) and ((d)f(g))", "%b()") do print(s) end (see demo)
Raku (former Perl6):
Non-overlapping multiple balanced parentheses matches:
my regex paren_any { '(' ~ ')' [ <-[()]>+ || <&paren_any> ]* }
say "Extract (a(b)c) and ((d)f(g))" ~~ m:g/<&paren_any>/;
# => (「(a(b)c)」 「((d)f(g))」)
Overlapping multiple balanced parentheses matches:
say "Extract (a(b)c) and ((d)f(g))" ~~ m:ov:g/<&paren_any>/;
# => (「(a(b)c)」 「(b)」 「((d)f(g))」 「(d)」 「(g)」)
See demo.
Python re non-regex solution
See poke's answer for How to get an expression between balanced parentheses.
Java customizable non-regex solution
Here is a customizable solution allowing single character literal delimiters in Java:
public static List<String> getBalancedSubstrings(String s, Character markStart,
Character markEnd, Boolean includeMarkers)
{
List<String> subTreeList = new ArrayList<String>();
int level = 0;
int lastOpenDelimiter = -1;
for (int i = 0; i < s.length(); i++) {
char c = s.charAt(i);
if (c == markStart) {
level++;
if (level == 1) {
lastOpenDelimiter = (includeMarkers ? i : i + 1);
}
}
else if (c == markEnd) {
if (level == 1) {
subTreeList.add(s.substring(lastOpenDelimiter, (includeMarkers ? i + 1 : i)));
}
if (level > 0) level--;
}
}
return subTreeList;
}
}
Sample usage:
String s = "some text(text here(possible text)text(possible text(more text)))end text";
List<String> balanced = getBalancedSubstrings(s, '(', ')', true);
System.out.println("Balanced substrings:\n" + balanced);
// => [(text here(possible text)text(possible text(more text)))]
The regular expression using Ruby (version 1.9.3 or above):
/(?<match>\((?:\g<match>|[^()]++)*\))/
Demo on rubular
The answer depends on whether you need to match matching sets of brackets, or merely the first open to the last close in the input text.
If you need to match matching nested brackets, then you need something more than regular expressions. - see #dehmann
If it's just first open to last close see #Zach
Decide what you want to happen with:
abc ( 123 ( foobar ) def ) xyz ) ghij
You need to decide what your code needs to match in this case.
"""
Here is a simple python program showing how to use regular
expressions to write a paren-matching recursive parser.
This parser recognises items enclosed by parens, brackets,
braces and <> symbols, but is adaptable to any set of
open/close patterns. This is where the re package greatly
assists in parsing.
"""
import re
# The pattern below recognises a sequence consisting of:
# 1. Any characters not in the set of open/close strings.
# 2. One of the open/close strings.
# 3. The remainder of the string.
#
# There is no reason the opening pattern can't be the
# same as the closing pattern, so quoted strings can
# be included. However quotes are not ignored inside
# quotes. More logic is needed for that....
pat = re.compile("""
( .*? )
( \( | \) | \[ | \] | \{ | \} | \< | \> |
\' | \" | BEGIN | END | $ )
( .* )
""", re.X)
# The keys to the dictionary below are the opening strings,
# and the values are the corresponding closing strings.
# For example "(" is an opening string and ")" is its
# closing string.
matching = { "(" : ")",
"[" : "]",
"{" : "}",
"<" : ">",
'"' : '"',
"'" : "'",
"BEGIN" : "END" }
# The procedure below matches string s and returns a
# recursive list matching the nesting of the open/close
# patterns in s.
def matchnested(s, term=""):
lst = []
while True:
m = pat.match(s)
if m.group(1) != "":
lst.append(m.group(1))
if m.group(2) == term:
return lst, m.group(3)
if m.group(2) in matching:
item, s = matchnested(m.group(3), matching[m.group(2)])
lst.append(m.group(2))
lst.append(item)
lst.append(matching[m.group(2)])
else:
raise ValueError("After <<%s %s>> expected %s not %s" %
(lst, s, term, m.group(2)))
# Unit test.
if __name__ == "__main__":
for s in ("simple string",
""" "double quote" """,
""" 'single quote' """,
"one'two'three'four'five'six'seven",
"one(two(three(four)five)six)seven",
"one(two(three)four)five(six(seven)eight)nine",
"one(two)three[four]five{six}seven<eight>nine",
"one(two[three{four<five>six}seven]eight)nine",
"oneBEGINtwo(threeBEGINfourENDfive)sixENDseven",
"ERROR testing ((( mismatched ))] parens"):
print "\ninput", s
try:
lst, s = matchnested(s)
print "output", lst
except ValueError as e:
print str(e)
print "done"
You need the first and last parentheses. Use something like this:
str.indexOf('('); - it will give you first occurrence
str.lastIndexOf(')'); - last one
So you need a string between,
String searchedString = str.substring(str1.indexOf('('),str1.lastIndexOf(')');
because js regex doesn't support recursive match, i can't make balanced parentheses matching work.
so this is a simple javascript for loop version that make "method(arg)" string into array
push(number) map(test(a(a()))) bass(wow, abc)
$$(groups) filter({ type: 'ORGANIZATION', isDisabled: { $ne: true } }) pickBy(_id, type) map(test()) as(groups)
const parser = str => {
let ops = []
let method, arg
let isMethod = true
let open = []
for (const char of str) {
// skip whitespace
if (char === ' ') continue
// append method or arg string
if (char !== '(' && char !== ')') {
if (isMethod) {
(method ? (method += char) : (method = char))
} else {
(arg ? (arg += char) : (arg = char))
}
}
if (char === '(') {
// nested parenthesis should be a part of arg
if (!isMethod) arg += char
isMethod = false
open.push(char)
} else if (char === ')') {
open.pop()
// check end of arg
if (open.length < 1) {
isMethod = true
ops.push({ method, arg })
method = arg = undefined
} else {
arg += char
}
}
}
return ops
}
// const test = parser(`$$(groups) filter({ type: 'ORGANIZATION', isDisabled: { $ne: true } }) pickBy(_id, type) map(test()) as(groups)`)
const test = parser(`push(number) map(test(a(a()))) bass(wow, abc)`)
console.log(test)
the result is like
[ { method: 'push', arg: 'number' },
{ method: 'map', arg: 'test(a(a()))' },
{ method: 'bass', arg: 'wow,abc' } ]
[ { method: '$$', arg: 'groups' },
{ method: 'filter',
arg: '{type:\'ORGANIZATION\',isDisabled:{$ne:true}}' },
{ method: 'pickBy', arg: '_id,type' },
{ method: 'map', arg: 'test()' },
{ method: 'as', arg: 'groups' } ]
While so many answers mention this in some form by saying that regex does not support recursive matching and so on, the primary reason for this lies in the roots of the Theory of Computation.
Language of the form {a^nb^n | n>=0} is not regular. Regex can only match things that form part of the regular set of languages.
Read more # here
I didn't use regex since it is difficult to deal with nested code. So this snippet should be able to allow you to grab sections of code with balanced brackets:
def extract_code(data):
""" returns an array of code snippets from a string (data)"""
start_pos = None
end_pos = None
count_open = 0
count_close = 0
code_snippets = []
for i,v in enumerate(data):
if v =='{':
count_open+=1
if not start_pos:
start_pos= i
if v=='}':
count_close +=1
if count_open == count_close and not end_pos:
end_pos = i+1
if start_pos and end_pos:
code_snippets.append((start_pos,end_pos))
start_pos = None
end_pos = None
return code_snippets
I used this to extract code snippets from a text file.
This do not fully address the OP question but I though it may be useful to some coming here to search for nested structure regexp:
Parse parmeters from function string (with nested structures) in javascript
Match structures like:
matches brackets, square brackets, parentheses, single and double quotes
Here you can see generated regexp in action
/**
* get param content of function string.
* only params string should be provided without parentheses
* WORK even if some/all params are not set
* #return [param1, param2, param3]
*/
exports.getParamsSAFE = (str, nbParams = 3) => {
const nextParamReg = /^\s*((?:(?:['"([{](?:[^'"()[\]{}]*?|['"([{](?:[^'"()[\]{}]*?|['"([{][^'"()[\]{}]*?['")}\]])*?['")}\]])*?['")}\]])|[^,])*?)\s*(?:,|$)/;
const params = [];
while (str.length) { // this is to avoid a BIG performance issue in javascript regexp engine
str = str.replace(nextParamReg, (full, p1) => {
params.push(p1);
return '';
});
}
return params;
};
This might help to match balanced parenthesis.
\s*\w+[(][^+]*[)]\s*
This one also worked
re.findall(r'\(.+\)', s)

how to have regular expression for a textfield which accepts all characters except a comma (,) and do not accept a white space at both ends

How to write a regular expression for a text field which accepts all characters except a comma (,) and do not accept a white space at both the ends? I have tried
[^,][\B ]
but no use
like 'product generic no' instead of 'product,generic,no' or ' product generic no '
I suggest a solution without regular expression. As you said you're using JS so the function is in JavaScript:
function isItInvalid(str) {
var last = str.length - 1;
return (last < 2 ||
str[0] == ' ' ||
str[last] == ' ' ||
str.indexOf(',') != -1);
}
EDIT: Just made it a bit more readable. It also checks if the string is at least 3 chars.
Something like below:
/^\S[^,]*\S$/
Using a Perl regular expression
/^\S[^,]*\S$/
This should work from 2 characters up, but fails in the edge case where the string has only one non-comma character. To cover that too:
/^((\S[^,]*\S)|([^\s,]))$/

Need to know logic behind few regular expression

I am having a code as
$wrk = OC192-1-1-1;
#temp = split (/-/, $wrk);
if ($temp1[3] =~ /101 || 102 /)
{
print "yes";
} else {
print "no";
}
Output :
yes
Need to know why this is printing yes. I know for regular expression | is supported for OR operator. But need to know why || is giving as "yes" as output
It is because || will make regex match succeed by matching with nothing all the time.
So it is essentially matching $temp1[3] (which doesn't exist) with anyone of the following
"101 "
""
" 102 "
I added double quotes just for explanation.
/101 || 102 / regex tries to match '101 ', or '' (empty string), or ' 102 '.
Since empty string can always be matched, it always returns true in your condition.
In addition to the regex-relevant answer from #anubhava, note that: OC192-1-1-1 is same as 0-1-1-1, which is just "-3", therefore #temp evaluates to ( "", "3" )
And of course there's no such thing as $temp1