I have a string:
s='articles[zone.id=1].comments[user.status=active].user'
Looking to split (via split(some_regex_here)). The split needs to occur on every period other than those inside the bracketed substring.
Expected output:
["articles[zone.id=1]", "comments[user.status=active]", "user"]
How would I go about this? Or is there something else besides split(), I should be looking at?
Try this,
s.split(/\.(?![^\[]*\])/)
I got this result,
2.3.2 :061 > s.split(/\.(?![^\[]*\])/)
=> ["articles[zone.id=1]", "comments[user.status=active]", "user"]
You can also test it here:
https://rubular.com/r/LaxEFQZJ0ygA3j
I assume the problem is to split on periods that are not within matching brackets.
Here is a non-regex solution that works with any number of nested brackets. I've assumed the brackets are all matched, but it would not be difficult to check that.
def split_it(s)
left_brackets = 0
s.each_char.with_object(['']) do |c,a|
if c == '.' && left_brackets.zero?
a << '' unless a.last.empty?
else
case c
when ']' then left_brackets -= 1
when '[' then left_brackets += 1
end
a.last << c
end
end.tap { |a| a.pop if a.last.empty? }
end
split_it '.articles[zone.id=[user.loc=1]].comments[user.status=active].user'
#=> ["articles[zone.id=[user.loc=1]]", "comments[user.status=active]", "user"]
How to write a regular expression for a text field which accepts all characters except a comma (,) and do not accept a white space at both the ends? I have tried
[^,][\B ]
but no use
like 'product generic no' instead of 'product,generic,no' or ' product generic no '
I suggest a solution without regular expression. As you said you're using JS so the function is in JavaScript:
function isItInvalid(str) {
var last = str.length - 1;
return (last < 2 ||
str[0] == ' ' ||
str[last] == ' ' ||
str.indexOf(',') != -1);
}
EDIT: Just made it a bit more readable. It also checks if the string is at least 3 chars.
Something like below:
/^\S[^,]*\S$/
Using a Perl regular expression
/^\S[^,]*\S$/
This should work from 2 characters up, but fails in the edge case where the string has only one non-comma character. To cover that too:
/^((\S[^,]*\S)|([^\s,]))$/
I need to determine whether a string begins with a number - I've tried the following to no avail:
if (matches("^[0-9].*)", upper(text))) str = "Title"""
I'm new to DXL and Regex - what am I doing wrong?
You need the caret character to indicate a match only at the start of a string. I added the plus character to match all the numbers, although you might not need it for your situation. If you're only looking for numbers at the start, and don't care if there is anything following, you don't need anymore.
string str1 = "123abc"
string str2 = "abc123"
string strgx = "^[0-9]+"
Regexp rgx = regexp2(strgx)
if(rgx(str1)) { print str1[match 0] "\n" } else { print "no match\n" }
if(rgx(str2)) { print str2[match 0] "\n" } else { print "no match\n" }
The code block above will print:
123
no match
#mrhobo is correct, you want something like this:
Regexp numReg = "^[0-9]"
if(numReg text) str = "Title"
You don't need upper since you are just looking for numbers. Also matches is more for finding the part of the string that matches the expression. If you just want to check that the string as a whole matches the expression then the code above would be more efficient.
Good luck!
At least from example I found this example should work:
Regexp plural = regexp "^([0-9].*)$"
if plural "15systems" then print "yes"
Resource:
http://www.scenarioplus.org.uk/papers/dxl_regexp/dxl_regexp.htm
This is a really basic regex question but since I can't seem to figure out why the match is failing in certain circumstances I figured I'd post it to see if anyone else can point out what I'm missing.
I'm trying to pull out the 2 sets of digits from strings of the form:
12309123098_102938120938120938
1321312_103810312032123
123123123_10983094854905490
38293827_1293120938129308
I'm using the following code to process each string:
if($string && $string =~ /^(\d)+_(\d)+$/) {
if(IsInteger($1) && IsInteger($2)) { print "success ('$1','$2')"; }
else { print "fail"; }
}
Where the IsInterger() function is as follows:
sub IsInteger {
my $integer = shift;
if($integer && $integer =~ /^\d+$/) { return 1; }
return;
}
This function seems to work most of the time but fails on the following for some reason:
1287123437_1268098784380
1287123437_1267589971660
Any ideas on why these fail while others succeed? Thanks in advance for your help!
This is an add-on to the answers from unicornaddict and ZyX: what are you trying to match?
If you're trying to match the sequences left and right of '_', unicorn addict is correct and your regex needs to be ^(\d+)_(\d+)$. Also, you can get rid of the first qualifier and the 'IsIntrger()` function altogether - you already know it's an integer - it matched (\d+)
if ($string =~ /^(\d+)_(\d+)$/) {
print "success ('$1','$2')";
} else {
print "fail\n";
}
If you're trying to match the last digit in each and wondering why it's failing, it's the first check in IsInteger() ( if($intger && ). It's redundant anyway (you know it's an integer) and fails on 0 because, as ZyX notes - it evaluates to false.
Same thing applies though:
if ($string =~ /^(\d)+_(\d)+$/) {
print "success ('$1','$2')";
} else {
print "fail\n";
}
This will output success ('8','8') given the input 12309123098_102938120938120938
Because you have 0 at the end of the second string, (\d)+ puts only the last match in the $N variable, string "0" is equivalent to false.
When in doubt, check what your regex is actually capturing.
use strict;
use warnings;
my #data = (
'1321312_103810312032123',
'123123123_10983094854905490',
);
for my $s (#data){
print "\$1=$1 \$2=$2\n" if $s =~ /^(\d)+_(\d)+$/;
# Output:
# $1=2 $2=3
# $1=3 $2=0
}
You probably intended the second of these two approaches.
(\d)+ # Repeat a regex group 1+ times,
# capturing only the last instance.
(\d+) # Capture 1+ digits.
In addition, both in your main loop and in IsInteger (which seems unnecessary, given the initial regex in the main loop), you are testing for truth rather than something more specific, such as defined or length. Zero, for example, is a valid integer but false.
Shouldn't + be included in the grouping:
^(\d+)_(\d+)$ instead of ^(\d)+_(\d)+$
Many people have commented on your regex, but the problem you had in your IsInteger (which you really don't need for your example). You checked for "truth" when you really want to check for defined:
sub IsInteger {
my $integer = shift;
if( defined $integer && $integer =~ /^\d+$/) { return 1; }
return;
}
You don't need most of the infrastructure in that subroutine though:
sub IsInteger {
defined $_[0] && $_[0] =~ /^\d+$/
}
I want to split a command line like string in single string parameters. How look the regular expression for it. The problem are that the parameters can be quoted. For example like:
"param 1" param2 "param 3"
should result in:
param 1, param2, param 3
You should not use regular expressions for this. Write a parser instead, or use one provided by your language.
I don't see why I get downvoted for this. This is how it could be done in Python:
>>> import shlex
>>> shlex.split('"param 1" param2 "param 3"')
['param 1', 'param2', 'param 3']
>>> shlex.split('"param 1" param2 "param 3')
Traceback (most recent call last):
[...]
ValueError: No closing quotation
>>> shlex.split('"param 1" param2 "param 3\\""')
['param 1', 'param2', 'param 3"']
Now tell me that wrecking your brain about how a regex will solve this problem is ever worth the hassle.
I tend to use regexlib for this kind of problem. If you go to: http://regexlib.com/ and search for "command line" you'll find three results which look like they are trying to solve this or similar problems - should be a good start.
This may work:
http://regexlib.com/Search.aspx?k=command+line&c=-1&m=-1&ps=20
("[^"]+"|[^\s"]+)
what i use
C++
#include <iostream>
#include <iterator>
#include <string>
#include <regex>
void foo()
{
std::string strArg = " \"par 1\" par2 par3 \"par 4\"";
std::regex word_regex( "(\"[^\"]+\"|[^\\s\"]+)" );
auto words_begin =
std::sregex_iterator(strArg.begin(), strArg.end(), word_regex);
auto words_end = std::sregex_iterator();
for (std::sregex_iterator i = words_begin; i != words_end; ++i)
{
std::smatch match = *i;
std::string match_str = match.str();
std::cout << match_str << '\n';
}
}
Output:
"par 1"
par2
par3
"par 4"
Without regard to implementation language, your regex might look something like this:
("[^"]*"|[^"]+)(\s+|$)
The first part "[^"]*" looks for a quoted string that doesn't contain embedded quotes, and the second part [^"]+ looks for a sequence of non-quote characters. The \s+ matches a separating sequence of spaces, and $ matches the end of the string.
Regex: /[\/-]?((\w+)(?:[=:]("[^"]+"|[^\s"]+))?)(?:\s+|$)/g
Sample: /P1="Long value" /P2=3 /P3=short PwithoutSwitch1=any PwithoutSwitch2
Such regex can parses the parameters list that built by rules:
Parameters are separates by spaces (one or more).
Parameter can contains switch symbol (/ or -).
Parameter consists from name and value that divided by symbol = or :.
Name can be set of alphanumerics and underscores.
Value can absent.
If value exists it can be the set of any symbols, but if it has the space then value should be quoted.
This regex has three groups:
the first group contains whole parameters without switch symbol,
the second group contains name only,
the third group contains value (if it exists) only.
For sample above:
Whole match: /P1="Long value"
Group#1: P1="Long value",
Group#2: P1,
Group#3: "Long value".
Whole match: /P2=3
Group#1: P2=3,
Group#2: P2,
Group#3: 3.
Whole match: /P3=short
Group#1: P3=short,
Group#2: P3,
Group#3: short.
Whole match: PwithoutSwitch1=any
Group#1: PwithoutSwitch1=any,
Group#2: PwithoutSwitch1,
Group#3: any.
Whole match: PwithoutSwitch2
Group#1: PwithoutSwitch2,
Group#2: PwithoutSwitch2,
Group#3: absent.
Most languages have other functions (either built-in or provided by a standard library) which will parse command lines far more easily than building your own regex, plus you know they'll do it accurately out of the box. If you edit your post to identify the language that you're using, I'm sure someone here will be able to point you at the one used in that language.
Regexes are very powerful tools and useful for a wide range of things, but there are also many problems for which they are not the best solution. This is one of them.
This will split an exe from it's params; stripping parenthesis from the exe; assumes clean data:
^(?:"([^"]+(?="))|([^\s]+))["]{0,1} +(.+)$
You will have two matches at a time, of three match groups:
The exe if it was wrapped in parenthesis
The exe if it was not wrapped in parenthesis
The clump of parameters
Examples:
"C:\WINDOWS\system32\cmd.exe" /c echo this
Match 1: C:\WINDOWS\system32\cmd.exe
Match 2: $null
Match 3: /c echo this
C:\WINDOWS\system32\cmd.exe /c echo this
Match 1: $null
Match 2: C:\WINDOWS\system32\cmd.exe
Match 3: /c echo this
"C:\Program Files\foo\bar.exe" /run
Match 1: C:\Program Files\foo\bar.exe
Match 2: $null
Match 3: /run
Thoughts:
I'm pretty sure that you would need to create a loop to capture a possibly infinite number of parameters.
This regex could easily be looped onto it's third match until the match fails; there are no more params.
If its just the quotes you are worried about, then just write a simple loop to dump character by character to a string ignoring the quotes.
Alternatively if you are using some string manipulation library, you can use it to remove all quotes and then concatenate them.
there's a python answer thus we shall have a ruby answer as well :)
require 'shellwords'
Shellwords.shellsplit '"param 1" param2 "param 3"'
#=> ["param 1", "param2", "param 3"] or :
'"param 1" param2 "param 3"'.shellsplit
Though answer is not RegEx specific but answers Python commandline arg parsing:
dash and double dash flags
int/float conversion based on SO answer
import sys
def parse_cmd_args():
_sys_args = sys.argv
_parts = {}
_key = "script"
_parts[_key] = [_sys_args.pop(0)]
for _part in _sys_args:
# Parse numeric values float and integers
if _part.replace("-", "1", 1).replace(".", "1").replace(",", "").isdigit():
_part = int(_part) if '.' not in _part and float(_part)/int(_part) == 1 else float(_part)
_parts[_key].append(_part)
elif "=" in _part:
_part = _part.split("=")
_parts[_part[0].strip("-")] = _part[1].strip().split(",")
elif _part.startswith(("-")):
_key = _part.strip("-")
_parts[_key] = []
else:
_parts[_key].extend(_part.split(","))
return _parts
Something like:
"(?:(?<=")([^"]+)"\s*)|\s*([^"\s]+)
or a simpler one:
"([^"]+)"|\s*([^"\s]+)
(just for the sake of finding a regexp ;) )
Apply it several time, and the group n°1 will give you the parameter, whether it is surrounded by double quotes or not.
If you are looking to parse the command and the parameters I use the following (with ^$ matching at line breaks aka multiline):
(?<cmd>^"[^"]*"|\S*) *(?<prm>.*)?
In case you want to use it in your C# code, here it is properly escaped:
try {
Regex RegexObj = new Regex("(?<cmd>^\\\"[^\\\"]*\\\"|\\S*) *(?<prm>.*)?");
} catch (ArgumentException ex) {
// Syntax error in the regular expression
}
It will parse the following and know what is the command versus the parameters:
"c:\program files\myapp\app.exe" p1 p2 "p3 with space"
app.exe p1 p2 "p3 with space"
app.exe
Here's a solution in Perl:
#!/usr/bin/perl
sub parse_arguments {
my $text = shift;
my $i = 0;
my #args;
while ($text ne '') {
$text =~ s{^\s*(['"]?)}{}; # look for (and remove) leading quote
my $delimiter = ($1 || ' '); # use space if not quoted
if ($text =~ s{^(([^$delimiter\\]|\\.|\\$)+)($delimiter|$)}{}) {
$args[$i++] = $1; # acquired an argument; save it
}
}
return #args;
}
my $line = <<'EOS';
"param 1" param\ 2 "pa\"ram' '3" 'pa\'ram" "4'
EOS
say "ARG: $_" for parse_arguments($line);
Output:
ARG: param 1
ARG: param\ 2
ARG: pa"ram' '3
ARG: pa'ram" "4
Note the following:
Arguments can be quoted with either " or ' (with the "other"
quote type treated as a regular character for that argument).
Spaces and quotes in arguments can be escaped with \.
The solution can be adapted to other languages. The basic approach is to (1) determine the delimiter character for the next string, (2) extract the next argument up to an unescaped occurrence of that delimiter or to the end-of-string, then (3) repeat until empty.
\s*("[^"]+"|[^\s"]+)
that's it
(reading your question again, just prior to posting I note you say command line LIKE string, thus this information may not be useful to you, but as I have written it I will post anyway - please disregard if I have missunderstood your question.)
If you clarify your question I will try to help but from the general comments you have made i would say dont do that :-), you are asking for a regexp to split a series of parmeters into an array. Instead of doing this yourself I would strongly suggest you consider using getopt, there are versions of this library for most programming languages. Getopt will do what you are asking and scales to manage much more sophisticated argument processing should you require that in the future.
If you let me know what language you are using I will try and post a sample for you.
Here are a sample of the home pages:
http://www.codeplex.com/getopt
(.NET)
http://www.urbanophile.com/arenn/hacking/download.html
(java)
A sample (from the java page above)
Getopt g = new Getopt("testprog", argv, "ab:c::d");
//
int c;
String arg;
while ((c = g.getopt()) != -1)
{
switch(c)
{
case 'a':
case 'd':
System.out.print("You picked " + (char)c + "\n");
break;
//
case 'b':
case 'c':
arg = g.getOptarg();
System.out.print("You picked " + (char)c +
" with an argument of " +
((arg != null) ? arg : "null") + "\n");
break;
//
case '?':
break; // getopt() already printed an error
//
default:
System.out.print("getopt() returned " + c + "\n");
}
}