I appreciate that what I'm trying to do will sound silly, but please bear with me. I want to insert an existing image (a PNG) of a table into an RMarkdown document that will be turned into a pdf. Is there any way I can do this and have the image treated as a table for numbering purposes? That is, obviously I could do
but the problem is that it will be numbered as e.g. Figure X, not Table Y. I would like it to be named/numbered as a table.
Thank you for any advice.
Looks like I got to a way to do it with kable with some inspiration...this still has two horizontal lines but that's ok for the moment:
```{r echo=F, warning=F}
temp.df = data.frame(image="")
temp.mat <- as.matrix(temp.df)
colnames(temp.mat) <- NULL
knitr::kable(temp.mat, caption="This is my caption")
```
Edit: as suggested by #HoneyBuddha, when using Bookdown, you must add the flag format="pandoc", i.e. knitr::kable(temp.mat, caption="This is my caption", format="pandoc")
Related
Here is a table I have created. I just want to make it stand out a little bit.
I have figured out how to make rows different colours. I know how to make an entire row or column bold (column_spec(5:7, bold = T)) but I would like specific cells only based on highest value...so for example in my table, I would like 147 in bold under number, 2.36 under mean....etc
Is there a way of doing this? Using conditional logic would be even better if that was possible - but I can't find how it is done?
Thanks
I figured it out - pretty simple:
test.attempt[1, 5] <- cell_spec(test.attempt[1, 5], "latex", bold = T)
I have a spreadsheet where I look if the data (website) already exist on the master sheet.
=if(countif(importrange("Spreadsheet Key","Leads!N:N"),K2)>0,"COMPANY EXISTS!","")
But the above formula is not dynamic enough. If there are companies with co.uk and on the master sheet if it's registered under .com, it won't show "COMPANY EXISTS!"
So I changed to the formula to look for works after before and after "." on a website.
=ARRAYFORMULA(REGEXEXTRACT(UNIQUE(SUBSTITUTE(importrange("Spreadsheet Key","Leads!N:N"),"www.","")), "([0-9A-Za-z-]+)\."))
But it's not working if I try to incorporate with if and countif.
=if(COUNTIF(ARRAYFORMULA(REGEXEXTRACT(SUBSTITUTE(importrange("Spreadsheet Key","Leads!N:N"),"www.",""), "([0-9A-Za-z-]+)\."),L2:L)>0,"Company Exist!",""))
It shows 'Wrong number of arguments to IF. Expected between 2 and 3 arguments, but got 1 arguments'
Can anyone help me out on where I am making the mistake?
Spreadsheet link- https://docs.google.com/spreadsheets/d/1La3oOWiM5KpzRY0MLLEUQC25LzDuQlqTjgFp-VlS8Bo/edit#gid=0
Edited: Made a mistake beforehand, didn't specify on that cell its looking against
Your formula had a typo. You are not closing the Arrayformula and the Countif correctly (the array formula closing parenthesis should go before the , of the count if). So change this:
=if(COUNTIF(ARRAYFORMULA(REGEXEXTRACT(SUBSTITUTE(importrange("Spreadsheet Key","Leads!N:N"),"www.",""), "([0-9A-Za-z-]+)\."),L2:L)>0,"Company Exist!",""))
To this:
=if(COUNTIF(ARRAYFORMULA(REGEXEXTRACT(SUBSTITUTE(IMPORTRANGE("Spreadsheet Key","Leads!N:N"),"www.",""), "([0-9A-Za-z-]+)\.")),L3:L)>0,"Company Exist!","")
I hope this has helped you. Let me know if you need anything else or if you did not understood something. :)
try:
=ARRAYFORMULA(IFNA(IF(IFNA(REGEXEXTRACT(SUBSTITUTE(IMPORTRANGE(
"1bnz7Y_xVN9Jo80aCBBeMBMJBnMDHkbZQUWnmL20CRi8", "Leads!N:N"),
"www.", ), "([0-9A-Za-z-]+)\."))>0, "Company Exist!", )))
I'm attempting to build a PowerShell CmdLet that can parse and cleanly reformat a chunk of XAML or any other markup language.
So far, I've had to build an assortment of CmdLet's so that I can get the correct information to put into this thing (for indentation, counts, items, child items, etc, so forth...)
What I'm attempting to do is to collect ALL of the properties and values in a set of XAML/HTML, etc, and then once I have the lengths of all those variables, I can then start to chunk them out and properly format them so that they all output down a straight line. It may not make a super amount of sense as I describe it? So, here's an example.
<Window xmlns = 'http://schemas.microsoft.com/winfx/2006/xaml/presentation'
xmlns:x = 'http://schemas.microsoft.com/winfx/2006/xaml'
Title = 'Window Title'
Height = '600'
MinHeight = '600'
Width = '800'
MinWidth = '800'
BorderBrush = 'Black'
ResizeMode = 'CanResize'
HorizontalAlignment = 'Center'
WindowStartupLocation = 'CenterScreen'>
The reason I am attempting to build this, is so that I can programmatically save the instructions to a smaller footprint. So, instead of... having fluctuating numbers for each line and item and the end result looking like this...
<Window xmlns='http://schemas.microsoft.com/winfx/2006/xaml/presentation'
xmlns:x = 'http://schemas.microsoft.com/winfx/2006/xaml' Title = 'Window Title' Height = '600'
MinHeight = '600' Width = '800' MinWidth = '800' BorderBrush = 'Black' ResizeMode = 'CanResize'
HorizontalAlignment = 'Center' WindowStartupLocation = 'CenterScreen'>
...I then have a set of instructions that can vectorize the content of the XAML, so that it has a pattern and less randomness. Sure, the line count might get expanded quite a bit, but there's no need to be concerned with that if all it is doing is expanding into RAM. Which is the point of it...
At any rate, the code that I am having trouble with is essentially a way to preserve the spacing between the quoted objects. I feel like I'm beating my head against a wall trying to get this to work correctly when I know it's a matter of Regex ...
I've posted the code I'm talking about via this link.
https://github.com/secure-digits-plus-llc/FightingEntropy/blob/master/Format-XAML.ps1
Lines 43-147
It is a script block, and testing with it requires a Xaml Here String.
Any suggestions would be appreciated. I'm not much of a Regex fan, I understand some basics to it but I'm not that great with it yet.
-MC
Found the answer I was looking for.
Not the most eloquent way to solve the issue I was having, but it works.
"(?<=\').+?(?=\')"
When the lines are split, and you want to preserve the spacing within the quotes, then you need something like this.
I was attempting to iterate through a do loop until the array/string contained (2) single quotes, but what was happening was... 'oh. I thought you wanted to match 'adbhjikvgrfe' with '21345rfs'.
No regex. Wasn't looking to match that. sigh.
Then it was taking the spacing out between the quotes.
sigh
I gotta say... anyone who truly writes good programming...? Well, I tip my hat off to you good sir/ma'am... because... it's a frustrating job. For certain.
Getting stuck on how to read and pretty up these values from a multiline cell via arrayformula.
Im using regex as preceding line can vary.
just formulas please, no custom code
The first column looks like a set of these:
```
[config]
name = the_name
texture = blah.dds
cost = 1000
[effect0]
value = 1000
type = ATTR_A
[effect1]
value = 8
type = ATTR_B
[feature0]
name = feature_blah
[components]
0 = comp_one,1
[resources]
res_one = 1
res_five = 1
res_four = 1
<br/>
Where to be useful elsewhere, at minimum it needs each [tag] set ([effect\d], [feature\d], ect) to be in one column each, for example the 'effects' column would look like:
ATTR_A:1000,ATTR_B:8
and so on.
Desired output can also be seen in the included spreadsheet
<br/>
<b>Here is the example spreadsheet:</b>
https://docs.google.com/spreadsheets/d/1arMaaT56S_STTvRr2OxCINTyF-VvZ95Pm3mljju8Cxw/edit?usp=sharing
**Current REGEXREPLACE**
Kinda works, finds each 'type' and 'value' great, just cant figure out how to extract just that from the rest, tried capture (and non-capturing) groups before and after but didnt work
=ARRAYFORMULA(REGEXREPLACE($A3:$A,"[\n.][effect\d][\n.](.)\n(.)","1:$1 2:$2"))
**Current SUBSTITUTE + REGEXEXTRACT + REGEXREPLACE**
A different approach entirely, also kinda works, longer form though and left with having to parse the values out of that string, where got stuck again. Idea was to use this to simplify, then regexreplace like above. Getting stuck removing content around the final matches though, and if can do that then above approach is fine too.
// First ran a substitute
=ARRAYFORMULA(SUBSTITUTE(SUBSTITUTE($A3:$A,char(10),";"),";;",char(10)))
// Then variation of this (gave up on single line 'effect/d' so broke it up to try and get it working)
=ARRAYFORMULA(IF(A3:A<>"",IFERROR(REGEXEXTRACT(A3:A,"(?m)^(?:[effect0]);(.)$")&";;")&""&IFERROR(REGEXEXTRACT(A3:A,"(?m)^(?:[effect1]);(.)$")&";;")&""&IFERROR(REGEXEXTRACT(A3:A,"(?m)^(?:[effect2]);(.)$")&";;"),""))
// Then use regexreplace like above
=ARRAYFORMULA(REGEXREPLACE($B3:$B,"value = (.);type = (.);;","1:$1 2:$2"))
**--EDIT--**
Also, as my updated 'Desired Output' sheet shows (see timestamped comment below), bonus kudos if you can also extract just the values of matching 'type's to those extra columns (see spreadsheet).
All good if you cant though, just realized would need that too for lookups.
**--END OF EDIT--**
<br/>
Ive tried dozens of things, discarding each in turn, had a quick look in version history to grab out two promising attempts and shared them in separate sheets.
One of these also used SUBSTITUTE to simplify input column, im happy for a solution using either RAW or the SUBSTITUTE results.
<br/>
**Potentially Useful links:**
https://github.com/google/re2/wiki/Syntax
<br/>
<b>Just some more words:</b>
I also have looked at dozens of stackoverflow and google support pages, so tried both REGEXEXTRACT and REGEXREPLACE, both promising but missing that final tweak. And i tried dozens of tweaks already on both.
Any help would be great, and hopefully help others in future since examples with spreadsheets are great since every new REGEX seems to be a new adventure ;)
<br/>
P.S. if we can think of better title for OP, please say in comment or your answer :)
paste in B3:
=ARRAYFORMULA(SUBSTITUTE(TRIM(TRANSPOSE(QUERY(TRANSPOSE(
IF(C3:E<>"", C2:E2&":"&C3:E, )),,999^99))), " ", ", "))
paste in C3:
=ARRAYFORMULA(IFNA(REGEXEXTRACT($A3:$A, "(\d+)\ntype = "&C2)))
paste in D3:
=ARRAYFORMULA(IFNA(REGEXEXTRACT($A3:$A, "(\d+)\ntype = "&D2)))
paste in E3:
=ARRAYFORMULA(IFNA(REGEXEXTRACT($A3:$A, "(\d+)\ntype = "&E2)))
paste in F3:
=ARRAYFORMULA(IFNA(REGEXEXTRACT(A3:A, "\[feature\d+\]\nname = (.*)")))
paste in G3:
=ARRAYFORMULA(IFNA(REGEXEXTRACT(A3:A, "\[components\]\n\d+ = (.*)")))
paste in H3:
=ARRAYFORMULA(IFNA(REGEXREPLACE(INDEX(SPLIT(REGEXEXTRACT(
REGEXREPLACE(A3:A, "\n", ", "), "\[resources\], (.*)"), "["),,1), ", , $", )))
spreadsheet demo
This was a fun exercise. :-)
Caveat first: I have added some "input data". Examples:
[feature1]
name = feature_active_spoiler2
[components]
0 = spoiler,1
1 = spoilerA, 2
So the output has "extra" output.
See the tab ADW's Solution.
I am having to give some symmetry to two charts. There is a big space under the chart at right I want to get rid of.
Probably is an easy to change parameter of yAxis in config, but I am quite lost. I don't find anything in official docs or web.
I've already tried with Barwidth, categorySpacing, barPercentage, etc
Real example at : https://jsfiddle.net/j1dffbgk/
.
The reason why that space is appearing, is because, you have an empty label in your labels array.
labels: [
["aaa", ' ff'],
["aa", " ddd"], "ee eeee", ""
^^
],
Remove that empty label (if not necessary) and you will be good to go.
Here is the working code on jsFiddle