I'm running an elasticsearch server on my Mac and would like to connect to it from Windows 10 running in VM Ware fusion. I have my adapter running in Bridged mode. Everything I read seems to say I should just be able to use the Mac IP address to connect, but it's not working. I have firewalls turned completely off on both the Mac and Windows. I'm trying to access Kibana from Windows, so doing http://192.168.x.x:5061 from Windows browser, keep getting ERR_CONNECTION_REFUSED in Chrome. I'm able to ping the IP from the guest, so clearly it can see the host, but something is blocking the connection. I tried forwarding port 5601 on my router, that didn't work either. I do also notice that trying to use http://192.168.x.x:5061 on the Mac itself doesn't work either, which I think may be the source of the problem, but I have no idea how to fix that.
The issue isn't on the VM but your elasticsearch config ... if you cannot connect to it either with the Mac or the VM, it means that it is elasticSearch that's the issue.
Figured it out. I changed Kibana config file to bind to 0.0.0.0 instead of localhost. I thought binding to localhost or 127.0.0.1 automatically made it also include the LAN IP, but you learn something new every day...
Related
I am installing VMware vSphre ESXi 7.0.2. But I cannot use web client (http://<ip_address>/ui)
When installed first time, I can connect with https://<IP_address> (It will be redirect to https://<IP_address>/ui ) and can create VM. But I found I cannot use some SDD/HDD. So I have re-installed ESXi after created the RAID partitions.
Re-Install was look OK, and I can see DCUI and set IP, DNS etc... After all set, I've tried to use https://<IP_address>. But it was timed out. (I have checked several things, then I found the ping does not work.)
I restarted the server then ping is OK. But when I try to connect with https://<IP_address> then the ping became "Destination net unreachable". (I have confirmed it with "-t" option.)
I thought it is firewall settings. So, I changed "--default-action" and "--enabled" but it still not working. Just in case, I have stop to use RAID disks and re-install it again (it is same as first installation), but it was same results.
There's likely still a networking-related misconfiguration. Use DCUI to verify IP/subnet mask/gateway/VLAN tag (if necessary) and that the appropriate NIC has been configured.
If those are set correctly, the DCUI also has some built-in testing options which allows you to do some outbound ping testing. By default it will check 3 hosts, including the gateway and usually two DNS names, but those can be changed to other options.
Strange, on work I can normally connect to internet with my Ubuntu 16.04 Server via briged wireless adapter, but at home I can't (when "A start job is running" sequence is over and after I log in to server there is no internet connection). I also tried to connect at friend's place but also result is negative.
Bridging with Lan adapter works perfectly, but I would rather use Wi-fi bridged adapter if I can. NAT or Host-only are not an option. Is it possible that router that my ISP gave me is problem? Any thoughts?
Change the adaptor to wireless, present below Bridged Adapter. And try.
I red lot of post about this question without find the good answer. The situation is simple, I have a server (Go) running on Ubuntu 14.04 (VMware Workstation 12.1.0 Pro). It listens on the 8001/8002 ports. From the host of the VM (Windows 10), I can access it from the host (Windows 10) but from my Xamarin Application or the others computers, I can't access this server.
I tried lot of things such as port transfer, edit of the NAT propreties (of the VM) and edit of the vmnetnnat.conf file as well. I tested about bridge connection but I didn't find the way to make it works with this way. etc
I also did transfer port from my internet box to get the access by IP instead of private network address (192.168.XXX.XXX) but it didn't works too.
If anyone can help, thank !
By default your Workstation configures your VM in either NAT or Host-only or event in Custom network configuration what means your host computer (you Windows 10) is the only endpoint which can access this box without any additional configuration in your router.
I would suggest you the easiest way is to use "Bridge" configuration what you mentioned below by getting (perhaps DCHP) IP schema from your parent router (the one gives your Windows 10). Thus your VM will be available across your "Home network", Once done, check your ICMP (pings) from Windows 10 to your VM, make sure you can see it.
Second point is that your 8001/8002 ports might be closed by firewall (iptables) in your ubuntu / Windows 10. You probably want to check your both firewalls as your traffic is being routes by "Virtual router" of Workstation.
Win7 PC running Rails in an Ubuntu VM via VMWare Player. I'm working on a site and would like to show it to a friend who's outside my network.
I found this blog post, which got me very close: http://blog.fardad.com/2012/06/vmware-player-and-custom-nat-port-map.html
OK, so I have the VM that is using NAT. As I understand it, that means that the VM will appear to have the same IP address as the parent machine to outside traffic.
I went into NAT settings and added port forwarding:
Host Port: 8200 Type: UDP Virtual IP Address: 192.168.198.184:3000
OK so my understanding is that I should now be able to go to 192.168.1.1xx:8200 (the IP of my 'real' PC) and access the webserver running in the VM. But when I go to that address, I don't get anything. I can ping 192.168.198.184 (the VM) from the PC.
What I want to be able to do is go into my router and set up a port that will eventually forward into the VM.
It seems like I'm missing something very small but I don't know what that is. Help, please.
If anyone is curious how to get the Virtual Network Editor:
go to the vmware-directory and run in elevated cmd.exe-box
rundll32.exe vmnetui.dll VMNetUI_ShowStandalone
http://communities.vmware.com/message/2155960#2155960
Find the vmnetnat.conf file, usually located in
C:\ProgramData\VMware\vmnetnat.conf
or
C:\Users\Application Data\VMware\vmnetnat.conf
Edit vmnetnat, add similar line in the [incomingtcp] section
8200=192.168.198.184:3000
Restart VMware NAT Service.
Try using Bridged network option in vmware player instead of NAT. It replicates your physical network.
You can use an http proxy to do that, by doing that you don't need to expose your entire private network, check out this blog post for more information how to access docker containers from external devices
I've got a problem in socket programming. I'm currently writing a simple server/client application which asks connecting clients to answer a survey (I'm following the exercises in the book: TCP/IP Sockets in C: Practical guide for Programmers). It works fine in my local network (using localhost to connect), but I can't make it work over the internet.
Since I changed some of the code found in the book, I tried to compile the original source code from the book but it still doesn't work. I assume this is not a code problem but a network problem.
I did some research and so I turned off my firewall, I forwarded the port I'm using (12543) in my router but it still doesn't work... I've got a remote windows server running Windows 7 for testing: when I run my server on it and try to connect from my computer it fails, when I try to run my server from my computer and try to connect from the remote windows server: it fails again. Even when I run my server on my computer and try to connect with the client from the same computer using my private IPv4 address 192.168.x.x or my public one, it fails ! Oh, and there is no firewall running on the windows server.
I really don't know what to do now... I can ping my windows server from my computer, I can ping my computer from my windows server, but it's impossible to connect to my application.
The source code can be found here: http://cs.ecs.baylor.edu/~donahoo/practical/CSockets2/textcode.html (SurveyServer2.cpp, SurveyClient2.cpp, SurveyCommon.h), but I don't think it's a code problem.
Please tell me if it's not clear enough. And excuse me if I did some grammatical errors, I'm french!
Any help would be appreciated, thanks!
EDIT : Ok, I know what's going on: it's a compatibility issue between IPv4 and IPv6! It's not properly working yet, but I now know what to fix. Thanks everybody :)
SECOND EDIT : Well, I think I finally understood. I was binding my server to a IPv6 address, but the host my server is running on only have a public IPv4 address. When I tried to connect, the DNS resolution only returned a IPv4 address so I was unable to connect to my server. I told to getaddrinfo to return only IPv4 addresses, so now it binds on a IPv4 address and it works fine.
There is surely a way to add a IPv6 address to my host but I don't think I will need it, it works okay right now, I hope this doesn't cause any trouble.
The code makes usage of getaddrinfo and need a hostname not a IP address.
It does sound like you have a connectivity issue or a DNS issue.
Ensure the name resolution is working:
Enter 'ping server_NAME' on the command line of the client machine.
If it can't find an IP address for the server name that could be your issue.
Ensure connectivity:
On the server command line:
enter 'netstat -an -p TCP'. This will show a list of all programs listening and their port numbers. You should see your server listening on port 12543.
On the machine where you are running your client program:
Use telnet to see if you can get through to the server. You can set the port number telnet uses with a command line option. Usually something like 'telnet -p 12543 server-ip'. If it says 'connection refused' then there's a connectivity issue (a firewall/etc). If it opens a connection you will get no error message and you will be able to type text to be sent to the server. You really only care if telnet was able to establish a tcp connection here.
If Telnet does connect then your issue is communication between the programs and not a network issue.