Impossible to start application after publish, the error returned:
Открывающий тег "meta" в позиции 14 строки 2 не соответствует закрывающему тегу "head"., строка 2, позиция 82
The reason of error was that publish location and installation folder was pointed to different domains (even when fisically it is same, one redirects to another).
So to fix, use native domain name in both paths.
Related
I have a Xamarin iOS application in VisualStudio 2019 on a Windows 10 PC. I build it on the PC, and when possible then right click the project and choose Show IPA File on Build Server, then on my Mac I upload the file to the app store using Transporter. I am encountering these issues:
Whenever I build, the build says it failed with message "There was an error unzipping the file bin\Ad-Hoc\MyApp.app.dSYM.zip: Could not find a part of the path 'C:\MyDirectory\MyApp.iOS\bin\Ad-Hoc\MyAppiOS.app.dSYM'." This has not historically caused any issues - we have still been able to upload the IPA to the app store and deploy our app - but I include it in case it's relevant to the other issues.
Sometimes, my build fails saying it "has been disconnected while waiting a post repsonse to topic xvs/Build/.../execute-task/MyApp.iOS/...Codesign" or "Unable to connect to Mac Server with Address='192.111.111.111' and User='My Username'. The build can't continue without a connection". I'm assuming a wifi issue must cause this, though the machines are all right next to one another and next to my router so seems odd. Occasionally when I try to pair to the Mac, I also get the message "Error, Couldn't connect to com. Please try again. An attempt was made to access a socket in a way forbidden by its access permissions." In any case, makes me wonder if there's any way for me to 1) hardwire the Mac to the PC or 2) build directly on the Mac instead of through VS on the PC, even though I write the code on the PC?
During the build, I periodically get an error "/Users/myUser/Library/Caches/Xamarin/mtbs/builds/MyApp.iOS//bin/Ad-Hoc/MyAppiOS.app: errSecInternalComponent MyApp.iOS C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\MSBuild\Xamarin\iOS\Xamarin.iOS.Common.targets 2003". If I lock all keychains on the Mac this goes away on the next build, but then it reappears a few builds later.
Once the build finishes with just the .dSym.zip error, most of the time, the "Show IPA File on Build Server" option still does NOT show up (not greyed out - it is not present in the menu at all) when I right click the iOS project. To get around this, I have been copying the file over to the Mac via S3. I'm wondering why the option doesn't show up, and if there's a way to just find the built file on the Mac rather than copying it over from Windows?
I then use Transporter on the Mac to upload the IPA file to the Apple Store. It always is able to read the version information and says the file is Delivered. However, often I then get an email from Apple saying the build failed because "ITMS-90688: This IPA is invalid - While unzipping the IPA we received the error message [ End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of MyAppiOS.ipa or MyAppiOS.ipa.zip, and cannot find MyAppiOS.ipa.ZIP, period. ] Verify that the IPA can be unzipped before reattempting your upload.".
In response to that error, I've tried to unzip the IPA file and I find that on the PC it is always unzippable if I change the extension to .zip, and on my Mac, I can always unzip it to see the Payload directory, and the MyAppiOS item inside it can never be opened - I get a popup "You can't open the application 'MyAppiOS' because it is not supported on this type of Mac." - in any case, the files Apple likes and the ones it doesn't look the same to me when I try unzipping.
My only ideas are to try to figure out how to open and build the app on my Mac, to call my router company, and to keep trying and trying, over and over again, until finally one of the builds works... which sometimes literally takes hours.
Many thanks for any help you are able to offer!
I was getting the Virtualbox problem
Callee RC: REGDB_E_CLASSNOTREG” (0x80040154)
all of a sudden. Problem started on VirtualBox 4.3 (I think). I upgraded to version 5 hoping to fix it but had no luck at that point.
My solution:
Check your directory C:\Users\yourname\.VirtualBox\ (yourname is in fact your username.)
On my PC there was a VirtualBox.xml with size of 0 Kb.
Also there was a VirtualBox.xml-prev with a size of 3 Kb.
Dates where somewhere around the time the problem started...
Renaming the VirtualBox.xml-prev one to the VirtualBox.xml SOLVED my issue.
For those without an xml file, here is my xml file, hopefully it helps .....
<?xml version="1.0"?>
<!-- ** DO NOT EDIT THIS FILE. ** If you make changes to this file while any VirtualBox related application ** is running, your changes will be overwritten later, without taking effect. ** Use VBoxManage or the VirtualBox Manager GUI to make changes. -->
-<VirtualBox version="1.12-windows" xmlns="http://www.innotek.de/VirtualBox-settings">
-<Global>
-<ExtraData>
<ExtraDataItem value="general,system,previewClosed,display,storage,audio,network,usb,sharedFolders,description" name="GUI/DetailsPageBoxes"/>
<ExtraDataItem value="m=59397901-1440-48ea-8781-6f86d06c7fbb" name="GUI/GroupDefinitions/"/>
<ExtraDataItem value="m=Sharepoint" name="GUI/LastItemSelected"/>
<ExtraDataItem value="415,153,770,550,max" name="GUI/LastWindowPosition"/>
<ExtraDataItem value="D:/virtualbox" name="GUI/RecentFolderHD"/>
<ExtraDataItem value="D:\virtualbox\Sharepoint.vdi;" name="GUI/RecentListHD"/>
<ExtraDataItem value="334,1261" name="GUI/SplitterSizes"/>
<ExtraDataItem value=",confirmGoingScale,remindAboutAutoCapture,remindAboutMouseIntegration,showRuntimeError.warning.HostAudioNotResponding,confirmInputCapture,warnAboutInaccessibleMedia" name="GUI/SuppressMessages"/>
<ExtraDataItem value="53" name="GUI/UpdateCheckCount"/>
<ExtraDataItem value="1 d, 2015-08-19, stable, 5.0.0" name="GUI/UpdateDate"/>
</ExtraData>
-<MachineRegistry>
<MachineEntry src="D:/virtualbox/Sharepoint/Sharepoint.vbox" uuid="{59397901-1440-48ea-8781-6f86d06c7fbb}"/>
</MachineRegistry>
-<MediaRegistry>
<HardDisks/>
<DVDImages/>
<FloppyImages/>
</MediaRegistry>
-<NetserviceRegistry>
-<DHCPServers>
<DHCPServer enabled="1" upperIP="192.168.56.254" lowerIP="192.168.56.101" networkMask="255.255.255.0" IPAddress="192.168.56.100" networkName="HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter"/>
</DHCPServers>
</NetserviceRegistry>
<SystemProperties exclusiveHwVirt="false" LogHistoryCount="3" webServiceAuthLibrary="VBoxAuth" VRDEAuthLibrary="VBoxAuth" defaultHardDiskFormat="VDI" defaultMachineFolder="C:\Users\yourname\VirtualBox VMs"/>
<USBDeviceFilters/>
</Global>
</VirtualBox>
I had the error...
Failed to create the VirtualBoxClient COM object.
The application will now terminate.
Callee RC: REGDB_E_CLASSNOTREG (0x80040154)
...when starting VirtualBox as normal user. Starting as administrator
worked on the other hand.
System: Windows 8, VirtualBox 5
Actually, the issue "suddenly" appeared after I played around with raw disk accesses. During these test, I re-installed VirtualBox as administrator.
What people not always know is that the registry has also an access right management, like files. Right-click on a folder to access the Autorisations window to display them.
When I re-installed as administrator, the registry keys where created with an admin level access. By this, I wasn't able anymore to start VirtualBox as non-admin.
Re-installing as normal user did not solve the problem. Probably because some admin-level keys could not be deleted.
Solution that worked for me:
Back-up .VirtualBox (optional, as all backups are :-)
Uninstall VirtualBox
Open Registry Editor regedit.exe as administrator.
Delete all remaining VirtualBox keys (especially the .NET, driver registrations, Compatibility Manager settings)
Reinstall VirtualBox using a user account.
Notes:
I did not test escalating the VirtualBox uninstaller process to administrator level with sysinternals. That might work as well.
Be careful with regedit. The GUI is quite '90s. Good to know: CTRL+F searches below the currently selected key, so be sure to go to the top when start searching.
I had one key for an USB driver that I wasn't able to delete due to access rights problems. Finally, this was not needed anyway.
Please don't forget to change access rights on VirtualBox disk files when they have been created with VirtualBox running as administrator.
Renaming the VirtualBox.xml-prev one to the VirtualBox.xml solved my issue.
After you upgrade to VirtualBox-5.0.8-103449 started getting error: Virtualbox "Callee RC: REGDB_E_CLASSNOTREG" (0x80040154)
No advice on the Internet did not help.
It helped only delete the entire contents of the folder "C:\Users\"user"\. VirtualBox" and then restart Oracle VM VirtualBox shortcut on the desktop.
Apparently when you remove the previous version of Virtualbox folder
"C:\Users\"user"\.VirtualBox" is removed.
As the contents of the folder should be removed manually after reinstalling VirtualBox, as well as in case of damage VirtualBox, for example due to lack of space on the hard disk.
Not to be confused with the folder "C:\Users\"user"\VirtualBox VMs"
This folder appears later, only after the establishment has a particular virtual machine.
sorry for machine translation.
In my case this error was caused by a zero-byte truncated VirtualBox.xml in the user's .VirtualBox folder. I found out after downgrading to 4.x and getting a more descriptive error message regarding a missing < tag.
As I already suggested on superuser, as of today (09/09/2015).
Upgrade to the new version that was released.You can find it here
There have been some changes concerning the Windows 10 Problems.
The solution is in the last paragraph.
I happened to have a different cause for the same error message under VirtualBox 5.0.20.
So I temporarily installed VirtualBox 5.1.10 which tries to analyse the situation and gives more info about probable culprit.
In my case the error message from VB 5.1.10 looked like following:
Failed to instantiate CLSID_VirtualBox w/ IVirtualBox, but CLSID_VirtualBox w/ IUnknown works.
PSDispatch looks broken by the 'xxx' ({11B6009E-3F04-4478-A807-30FBD579FC07}) program, suspecting that it features the broken oleaut32.msm module as component {997FA962-E067-11D1-9396-00A0C90F27F9}.
We suggest you try uninstall 'xxx'.
See also https://support.microsoft.com/en-us/kb/316911 .
Result Code:
E_NOINTERFACE (0x80004002)
Component:
VirtualBoxClientWrap
Interface:
IVirtualBoxClient {d2937a8e-cb8d-4382-90ba-b7da78a74573}
Where 'xxx' is here a placeholder name for a specific program name it mentions and suggests to uninstall. (The specific name in my case is not important here).
So I did uninstall the specific program the new VirtualBox version accused, and after that VB started working again. Then I reinstalled the old VB version 5.0.20 I needed to continue using and all was well.
After some researching I found this thread with the step:
find C:\Program Files\Oracle\VirtualBox\drivers\vboxdrv\VBoxDrv.inf right click and select Install
I had this same issue, I believe something corrupted whilst shutting down without correctly closing connections and I couldn't boot VB.
Tried all of the solutions above but none of them worked.
Without Uninstalling I went to the virtual box website and grabbed the most recent version and installed over the top and VB jumped into life.
Version 6.0.14 From 6.0.10
How can I start the wamp server on windows 7 using wamp version 2.4?
Following is the error message I get:
The configuration file contains a syntax error on line 24:
[EParseError][config] section directive "ImageList" already specified.
Error:
The configuration file contains a syntax error on line 7;
[EParseError] No tray icon was specified. Please assign a tray icon by
using on the of the Tray icon directives in the [Config] section.
Caused by:
Computer abruptly shutting down while server is running
Fix:
• Go to the wamp/scripts folder
• Open console/cmd as admin
• run: php refresh.php
• Done!
Make sure you have php in your system environment settings
then go to the wamp/scripts folder
open console
run:
php refresh.php
answer from here solved my issue, referenced above info from this stack answer
ISSUE
You have a duplicate entry on C:\wamp\wampmanager.ini
ImageList=images_off.bmp or something like that.
FIX
Remove one of them (probably line 24)
It sounds like you have been playing with \wamp\wampmanager.tpl
Never play with wampmanager.tpl unless you have taken a copy first!
WAMPServer rebuilds \wamp\wampmanager.ini using a script that uses \wamp\wampmanager.tpl among other files as input, each time you start WAMPServer or when you use the wampmanager menus and click refresh.
So to fix your problem edit of wampmanager.tpl to remove the duplicated line and then do:
rightclick wampmanager icon -> refresh
Or just exit wampmanager and restart it.
to rebuild the \wamp\wampmanager.ini file
Take a backup of your Wampmanager.ini file in your wamp installation directory (in my case it is c:\Wamp64). Then rename it or move it to some other folder.
Get the wampmanager.ini from a new installation or any similar installation if you already have, then paste it in the same path. It will work like charm. This may change any of the settings you had earlier but it will make your wamp working without reinstalling it.
Wamp Manager folder
Wamp Manager configuration file in CMD prompt
It is interesting that this error shows up after initial install of the current version 3.2.6 found on aviatechno (without being able to tamper with any installed configuration file, the .ini in the installation is broken). It reports an error with line 27: WAMPMARIADBOFF.
[Services]
Name: APACHESERVICE
WAMPMARIADBOFFName: MARIADBSERVICE
WAMPMYSQLOFFName: MYSQLSERVICE
Use the new ini repair tool you can find on the aviatechno website
which corrects the lines in the ini file as:
[Services]
Name: wampapache
Name: wampmysqld
Name: wampmariadb
...
Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmariadb; ServiceAction: startresume; Flags: ignoreerrors
Only do this on new installs
Even after that wampserver does not start or does not start the services. To repair: stop the background process AeTrayMenu, head over to the folder c:\wamp64 removing its content and reinstall.
This did the trick for me.
I try to index PDF files with Sitecore 7.
I installed IFilter , but I received on crawlers log next error :
ManagedPoolThread #17 09:24:20 WARN LuceneIndexOperations : Update : Could not build document data 4433434-3443-3223-91c4-233232. Skipping.
Exception: System.Runtime.InteropServices.COMException
Message: Error HRESULT E_FAIL has been returned from a call to a COM component.
Source: mscorlib
at System.Runtime.InteropServices.ComTypes.IPersistFile.Load(String pszFileName, Int32 dwMode)
at Sitecore.ContentSearch.Extracters.IFilterTextExtraction.FilterLoader.LoadAndInitIFilter(String fileName, String extension)
at Sitecore.ContentSearch.Extracters.IFilterTextExtraction.FilterReader..ctor(String fileName)
at Sitecore.ContentSearch.ComputedFields.MediaItemIFilterTextExtractor.ComputeFieldValue(IIndexable indexable)
at Sitecore.ContentSearch.ComputedFields.MediaItemContentExtractor.ComputeFieldValue(IIndexable indexable)
at Sitecore.ContentSearch.LuceneProvider.LuceneDocumentBuilder.AddComputedIndexFields()
at Sitecore.ContentSearch.LuceneProvider.LuceneIndexOperations.GetIndexData(IIndexable indexable, IIndexable latestVersion, IProviderUpdateContext context)
at Sitecore.ContentSearch.LuceneProvider.LuceneIndexOperations.BuildDataToIndex(IProviderUpdateContext context, IIndexable version, IIndexable latestVersion)
at Sitecore.ContentSearch.LuceneProvider.LuceneIndexOperations.<>c__DisplayClass7.<Update>b__0(Item version)
What I have to do work because on Sitecore documentation they said it must work out of the box.
I had the same issue and I received from Sitecore support next response (it works fine after):
1) Copy all the Adobe iFilter .dll files into the "\System32\Inetsrv" folder. This is the working directory for IIS on Windows Server.
The Adobe iFilter .dll files are stored at the "C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin" folder by default.
Also you can use the "IFilter Explorer" tool to detect the folder where the .dll files are stored:
http://www.citeknet.com/Products/IFilters/IFilterExplorer/tabid/62/Default.aspx
For more details please see the screenshot:
http://screencast.com/t/xmWukanM+
2) Delete all the files under the "Website/App_Data/MediaCache" folder;
3) Rebuild the Sitecore Search Indexes (Sitecore -> Control Panel -> Indexing -> Indexing Manager);
4) Clear the Sitecore cache (the http://{hostname}/sitecore/admin/cache.aspx tool);
5) Restart the IIS;
Here is the solution I took since I didn't like the idea of coping iFilter related DLLs into the system path.
install Adobe IFilter 9 (I used this link). Note version 9 is essential as starting at version X they abandoned file based interface.
add filter location to the PATH environment variable. In my case it was %ProgramFiles%\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin\.
run iisreset
go back to Sitecore app and run index rebuild for necessary indexes.
For your consideration:
while trying to resolve the issue I granted full access to IFilter folder for app pool account. I don't think it's necessary as I removed it at the end and everything was still working fine.
After these steps PDF indexing started working fine on my instance of Sitecore 7 running on Windows 8.1.
currently I try to connect to our TFS2010 server with Toad Team Coding.
I've tried to follow this documentation, but it's for Toad 10.6 and some of the windows look different. Still I was able to connect to our collection and see all our Team Projects we have.
The problems start, when I try to export something to TFS.
Team Coding Code Collections -> Create new revision...
There I select e.g. all Packages and click "OK", then I get the Export Options -> OK
Then I just get a bunch of errors:
"Unable to add revision from VCS repository. Error uploading file: C:\temp...."
The progess window in the background says: "Package xyz has been added to the VCS."
Now I have a bunch of PKS/PKB files in my folder and Visual Studio shows me, that I have new files with Pending Change "add".
Team Coding Viewer shows me all the files with status "Available", checkin is grayed out, checkout gives the same error as above and the info window at the bottom shows:
15:29:46 Error: Cannot create file
"C:\Users\abc~1\AppData\Local\Temp\$111.11.1.11:1521\xxx.50510.PKB".
Die Syntax für den Dateinamen, Verzeichnisnamen oder die
Datenträgerbezeichnung ist falsch
(Translation for the last part: Syntax of filename, foldername or diskname is wrong).
At this point it doesn't make sense to go on. Toad will show the files now as checked out, but in TFS they are still with the "add" change. Toad acts like the checkin/checkout was successful (window at the bottom) and shows the error for every file.
Any idea? Any new tutorial to set up Toad 11 with TFS 2010?