I am using Codelite for the first time. I can successfully build code, but Codelite remains unresponsive to the Run command (or to ctrl+F5). Below is the screenshot of the build log.
enter image description here
What could possibly be the cause of this issue? i can´t find any documentation on the subject.
Codelite version : 11.0.8
Best regards,
Chetan
Related
have some real trouble with QtCreator on ubuntu 18 and was wondering if anyone could give me any help. This morning I installed cmake for another project I was working on, now when I try to run a project in qtcreator it is trying to deploy it via FTP, even though it is a Qt c++ project. I dont know if this is anything to do with cmake, but this worked last night before I installed it. My question is, can anybody explain to me how to run a project from QtCreator, on the local system( Terminal or otherwise, doesnt matter ) without any deployment issues. Im sorry if this is a stupid question, but I am extremely grateful for any hep
In a console, you can just cd into the project directory (where the .pro file resides) and execute "qmake" and then "make". That should compile your executable which you can then run using "./[executable filename]" or "/[path]/[executable filename]". Also, on the console you might see where this FTP transfer comes from. Also, in QtCreator you can set the build system and change that from cmake to something else to see if its a cmake problem.
So, not sure how this issue came up, but I have found a workaround after much trial and error. Open a project, In the left tab click Projects and under build and run select Run. In this menu deploy steps have already been added when i create a project, so these need to be deleted. Now in the Run section on the same screen Click add -> Custom executable and select the file that has already been built for the project in question. In my case this solves the above problem, but does not explain why QtCreator is trying to deploy C++ projects via FTP. If anyone out there is struggling with this issue feel free to post a question here and I will assist as much as possible!
I installed several times the qt creator but it never cost me as much as in my current PC; First I used the installer that always had on my Pendrive (that of Qt 5.8), told me that I could not download some repositories, I downloaded version 5.9 of the same installer, with the same result. After trying to install it several times and it did not load I went to another house where I managed to install it, although I had to be very aware of many errors coming out of missing libraries (while installing Qt 5.9). After this I had to download the sp1 for my win7 OS through "windows updates" to run the Qt creator, but later, when loading, creating or running a project, I would say in console (it does not matter if it is GUI) the following : "Could not determine which" make "command to run. Check the" make "step in the build configuration." I would very much appreciate your help to anyone who wants to advise me, because I have already had many problems with my computer, from losing everything (the previous hard drive had installed original win10) to a series of very annoying setbacks like this. I cannot post images, I have no more than 10 reputations.
edit 1: there are the images:
https://ibb.co/jcNp05
https://ibb.co/hMyU05
The problem is that the video you posted is for linux, but i thank you for your help. I need now more he
You have to set a valid compiler to build your project. As any compiler is not set, it is asking you to check the configuration.
For example in my PC, I get the following as compiler output:
11:13:33: Running steps for project ListViewExample...
11:13:33: Configuration unchanged, skipping qmake step.
11:13:33: Starting: "C:\Qt\Qt5.2.1\Tools\mingw48_32\bin\mingw32-make.exe"
C:/Qt/Qt5.2.1/Tools/mingw48_32/bin/mingw32-make -f Makefile.Debug
Here you can observe that C:/Qt/Qt5.2.1/Tools/mingw48_32/bin/mingw32-make is the make compiler which builds the application.
You can set the compiler path here:
Tools > Options > Build & Run > Kits. Select the kit displayed and select a
valid compiler.
How to add mingw compiler at the time of installation
Reference Video for similar issue
You can try this youtube video link. Hope this solves your problem.
I've looked for an answer during a few days and I haven't found anything similar anywhere;
I downloaded Qt from the official website, installed it and apparently compiling is fine. But whenever I try to execute (Ctrl+R) any app, even the basic one which only displays a window or widget, QtCreator itself crashes. No error message, nothing, just crashing.
I've tried to redownload and reinstall it a few times with different settings, but nothing will do.
I'm running QtCreator on Windows 7 64 bits. I'll try on my laptop which is also running windows and will update if I find anything.
Any help would be appreciated, I need to start a project as soon as possible. I'm relatively new to QT and if you need info on anything just ask me. Thanks :)
Use dependency walker, http://www.dependencywalker.com/
and post any missing dependencies. It is possible some install targets or options are missing from when you installed QtCreator, which can be resolved with the maintenance tool in the same directory you installed Qt.
Also, are you using the Visual Studio compiler(must have Visual Studio installed separately, and mark the option during install), or the Ming compiler(2 options checked during install or maintenance)?
Check if your antivirus is locking it, I had a similar issue time ago and it was due to antivirus (Avast specifically). Disable antivirus' realtime shields and try to execute a basic app.
It is necessary to use QtCreator? I use QtDesigner snd VS2013 and things go very well. :)
check this thread Qt Creator Plain C++ Project won't run/debug... and this C++ - QtCreator doesn't show any output
I recently started learning C++ and I installed Netbeans IDE 6.9.1 and also the Cygwin compiler packages and configured them, and added Cygwin to my environment variable PATH like the instructions told me to.
I wrote a basic "Hello World" program and when I press Ctrl+F5 to "Debug Main Project" it seems to build fine but the black console/command prompt window flashes then disappears.
Then when I go to Run > Run Main Project, it builds and then a command prompt window pops up with the directory to "sh.exe" in its title.
I took a screenshot of the error message:
Does anyone know why this is happening and why I can't get the program to run properly even in debug?
Notice that in the screenshot I switched over to the MinGW tools because I thought maybe Cygwin was the problem, but the same error still occurs.
Any help would be greatly appreciated. Thank you.
"No such file or directory" in the error message is the key. When you run the project, it wants to access a file which is not there. Make sure that the paths are set up correctly.
So, I'm starting a C++ class right now, and I've configured NetBeans (which I use normally for PHP and Java Development) to use the Cygwin compiler/debugger. This is my first structured experience with C++, and I'm running into a slight issue. When I attempt to run a program within NetBeans (F11 or the Green Triangle) the project builds correctly, no errors or warnings, but then won't run. I receive the following error:
The application failed with exit code -1073741515 (0xc0000135).
This could indicate that no required .dll was found in the PATH.
Please try to start the following command from the command shell (cmd.exe).
This may give some additional information.
C:/Users/Eric/Documents/NetBeansProjects/CS217ASeminar1/dist/Debug/Cygwin-Windows/cs217aseminar1
RUN FAILED (exit value -1,073,741,515, total time: 58ms)
When I attempt to execute the given file within a command shell, I get no errors and the program runs successfully. The research I've done on this error usually indicates that C:\cygwin and/or C:\cygwin\bin (my install directories) aren't in the path. However, I've verified that I they've been added to the path, and I can run arbitrary programs from both of those folders.
Does anyone have any suggestions on how to resolve this error, or any experience with something similar? Obviously, it's not a huge deal, but I'd like to be able to use NetBeans's built in functionality.
Thanks in advance.
Edit: After tinkering a bit with the settings of my project in an attempt to fix it, it appears that the error was being caused by the Profiler in NetBeans. Since that only works on Linux/Solaris, and this is a Windows 7 box, disabling that caused no loss of functionality and solved the issue. Thanks for everyone who tried to help.
After tinkering a bit with the settings of my project in an attempt to fix it, it appears that the error was being caused by the Profiler in NetBeans. Since that only works on Linux/Solaris, and this is a Windows 7 box, disabling that caused no loss of functionality and solved the issue. Thanks for everyone who tried to help.
Right click on project change set configuration from debug to release. It worked for me.
Might be wrong, but it sounds like your path might not be set correctly...
Netbeans docs