I built tensorflow with VS2015 and I was able to run some examples,
as tf_tutorials_example_trainer and label_image.
Then I tried to run the samples here. I was able to compile and start the example.cc but when reaching the line
Scope root = Scope::NewRootScope();
I get this error:
Op type not registered 'NoOp' in binary running on DESKTOP-S5QHRCE.
Make sure the Op and Kernel are registered in the binary running in this process
What am I missing?
I found this.Thanks to Joe, who explains how to use the /WHOLEARCHIVE option to fix the issue.To avoid out of memory error during linking if using Optimize for debugging (/DEBUG) option, do msbuild /p:Configuration=Release youproject.vcxproj in a command prompt.
Related
I am trying to connect Valgrind with CLion 2020.2.1 for testing purposes, but CLion (and perhaps I) cannot locate the Valgrind executable.
The path I am currently using is:
\\wsl$\Ubuntu\usr\bin\valgrind
But when I try to run anything with Valgrind using this path I get a message stating that it cannot run the program because of this error:
CreateProcess error=193, %1 is not a valid Win32 application
Which seemed to make sense upon further research, as what I am selecting (\usr\bin\valgrind) appears to be a .cpp source file and not an executable - as the error would indicate - but now I don't know what the issue is. If that isn't what CLion is looking for, then where is the file it is looking for?
Have also tried path '/usr/bin/valgrind/' which resulted in "Valgrind executable not found." when I tried to compile.
If anyone has any advice it would be greatly appreciated!!
i just started to code in cpp and nothing is working idk if i didn't install the gcc properly or what but i already set the path of the bin file idk why it refuses to run
the code:
#include<iostream>
int main()
{
std::cout<<"hello";
}
and the problem is that when I try to use the "code runner extension" it is not working so I just press f5 and then when I get the error messages which says at first "could not find the task file'c/c++:g++.exe build active file' " and I get three options 1:debug anyway
2:configure task
3:cancel
when I choose debug anyway I get this error here
Since you're on windows consider installing Visual Studio or CLion. They're more beginner friendly - VSCode can get tricky to run c++ on windows. Either way, looks like you're trying to run your project without building it first. There should be a build option right next to the run option. Try building it, then running. The build is what compiles and creates the project.exe file, which is what the compiler is saying isn't there.
The referenced IDE's always auto-build on run, so there's that
If you're familiar with using the command line, these commands will do what you want, assuming the .cpp file is in your current directory.
g++ <FILENAME>
./a.out
There are wonderful flags you can add to the first command (the compiling command) like -Wall, -Wextra, -o, and many more. But, since it seems like you're just starting out, there's no need to worry about those!
If you're not familiar with the command line, I would encourage you to become familiar! It is an extremely powerful tool for a programmer. Here is a YouTube video that talks about it.
I am currently installing the HDF5 library, more precisely the hdf5-1.10.0-patch1, on Cygwin, as I want to use it with Fortran. Following the instructions from the hdfgroup website
(here is the link), I did the following:
./configure --enable-fortran
make > "out1_check.txt" 2> "warn1_check.txt" &
make check > "out2_check.txt" 2> "warn2_check.txt" &
The execution of the last command (make check) proceeds as it should, until it gets stuck. The process does not stop and something is happening (8-12% CPU are in use by sh.exe, already 39 hours of CPU time) but "out2_check.txt" looks like
Making check in src
...
[many successful checks]
...
============================
No need to test testlinks_env.sh again.
============================
============================
Testing testswmr.sh
Unfortunately, I do not have the output file from the first run of make check, but it did not contain more information on Testing testswmr.sh. There was never any error message.
So, what is this testswmr.sh, why does it get stuck and how can I finalize the installation process? Maybe I can skip the remaining checks and just proceed to make install?
Important note: an older version of HDF5 is already installed from the Cygwin repo. It does not seem to support Fortran however, so I decided to install the current version myself.
Available (and used) compilers are gcc and gfortran.
As far as I can tell, only Intel Fortran is supported on Windows. There is no Cygwin download here https://support.hdfgroup.org/HDF5/release/obtain518.html and I have never come across a report of experience for Cygwin/Fortran/HDF5.
Your options:
Use Intel Fortran
Use Linux or Mac
Sorry
I'm new to running SonarQube scans and I get this error message in the log in Jenkins:
16:17:39 16:17:36.926 ERROR - The only way to get an accurate analysis of your C/C++/Objective-C project is by using the SonarSource build-wrapper. If for any reason, the use of the build-wrapper is not possible on your project, you can bypass it with the help of the "sonar.cfamily.build-wrapper-output.bypass=true" property. By using that property, you'll switch to an "at best" mode that could result in false-positives and false-negatives.
Can someone please advise where I can find and run this SonarSource build-wrapper?
Thanks a lot for your help!
To solve this issue, download the Build Wrapper directly from your SonarQube Server, so that its version perfectly matches your version of the plugin:
Build Wrapper for Linux can be downloaded from URL
http://localhost:9000/static/cpp/build-wrapper-linux-x86.zip
Unzip the downloaded Build Wrapper,
Configure it in your PATH because it's just more convenient
export PATH=$PATH:/path/where/you/unzip
Once done, Run below commands.
build-wrapper-linux-x86-64 --out-dir <dir-name> <build-command>
build-wrapper-linux-x86-64 --out-dir build_output make clean all
Once all this done, you have to modify your sonar-project.properties file with following line. Note the dir-name is same directory which we defined in previous command.
sonar.cfamily.build-wrapper-output=<dir-name>
and then you can run the sonar scanner command.
sonar-scanner
this will do the analysis against your code. For more details, you can check this link.
Contacted support, turns out this was caused by missing the argument sonar.cfamily.build-wrapper-output in the scanner begin command.
Build wrapper downloads:
Linux: https://sonarcloud.io/static/cpp/build-wrapper-linux-x86.zip
macOS: https://sonarcloud.io/static/cpp/build-wrapper-macosx-x86.zip
Windows: https://sonarcloud.io/static/cpp/build-wrapper-win-x86.zip
Some links covering how to run the build wrapper:
https://docs.sonarqube.org/latest/analysis/languages/cfamily/
https://blog.sonarsource.com/with-great-power-comes-great-configuration/
I am getting an error:
"Error occurred during initialization of VM
Unable to load native library: Can't find dependent libraries"
The error arises when I try to execute my exe file.
I have created exe file through pyinstaller on a django application. Application uses pylucine library. I think it may be the issue of error.
How to fix the error?
Since I can't be certain given you've provided very few details here is a shot in the dark to help solve your problem:
First, try removing the jvm.dll file that gets packaged with the pyinstaller -D youmodule.py command (for now work with the directory command rather than -F option). The reason why is here.
With that jvm.dll file gone, you should start seeing the actual error code - and with that the java class or dependency that isn't being loaded.
If it's a java class that isn't being properly loaded then you know instantly it must not be correcly represented in the classpath environment variable and you should do everything in your power to make sure it is:
e.g.: os.environ['CLASSPATH'] += 'the/path/to/the/jar'
Otherwise, consider bulking up your question with more details, especially if you can get a more meaningful error output.
I had the same error trying to run a .exe built with PyInstaller through wine.
My problem went away by adding C:\Program Files\Java\ [your jdk version here] \jre\bin\server to the PATH environment variable in wine - I suppose it might be the same in Windows.
It also reappeared if I tried to build with C:\Program Files\Java\ [your jdk version here] \jre\bin\server in my PATH, so I had to build without it and then append it before running it (I have no explanation as to why this happens).