I need to install python2.7 on Opensuse 11.4. I cant find repo for that. Even cant find git repo. Where sould i search for it ?
I tried:
http://ftp5.gwdg.de/pub/opensuse/discontinued/distribution/11.4/repo/oss/
http://ftp5.gwdg.de/pub/opensuse/discontinued/update/11.4/rpm/i586/
http://download.opensuse.org/repositories/openSUSE:/11.4:/Contrib/standard/
http://download.opensuse.org/repositories/openSUSE:/11.4:/Live/standard/
But cant find not git not python2.7.
The SUSE Open Build Service usually is the place to look. It shows two "unstable" repos containing Python 2.7. You may need to select your OS (OpenSuse 11.4) on the search page. The more promising of the two is systemsmanagement:saltstack:products:testing
Related
Currently, I am working on the Ns3 simulator and now trying to enable the pyviz visualizer. According to the doc, I have downloaded the three dependencies which are
py27-pygtk
py27-pygoocanvas
py27-pygraphviz
Now in order to use this, I still need to enable the python bindings which I used /usr/bin/python2.7 ./waf configure wanna to check what needs for enabling python bindings. The result shows that
Python Bindings : not enabled (PyBindGen version not correct and newer version could not be retrieved)
So I checked the Doc and downloaded PyBindGen (version 0.18.0). The output shows
Installed /Library/Python/2.7/site-packages/PyBindGen-0.18.0-py2.7.egg
Processing dependencies for PyBindGen==0.18.0
Finished processing dependencies for PyBindGen==0.18.0
After I ran the configuration check the results still showed that PyBindGen version not correct and newer version could not be retrieved
So I presume that is that because I installed the wrong version of PyBindGen? If so how can I get the suitable version for enabling Python Binding?
I would appreciate if there is someone who can help me figure it out. Many thanks.
S.
According to the Google Group
Here is the resolution(tested it worked):
follow the instruction
hg clone http://code.nsnam.org/ns-3-allinone
cd ns-3-allinone && ./download.py
This will solve the Python Binding problem
Updated: after downloading this version of ns3. Solving the python binding problem. Then there will be another problem after running
./waf configure
it will show the result like this:
PyViz visualizer: not enabled (Missing python modules: gtk, goocanvas, pygraphviz)
Even though I have installed all of the three dependencies. So after some researches I found that there has another questions post So there is a guy gave the guessing that
" Waf found the standard Python here (/usr/bin/python is the Apple path), and you installed the python libraries using MacPorts.
Most probably you'll need to configure Python to point to the MacPort-based Python, or it will not see what you installed."
So according to How to: Macports select python
here is the solution:
port select --list python
sudo port select --set python python27
Hope it will help anyone come afterwards to use this.
S.
Just recently I have begun to review the code for a project produced by a friend roughly 4 years ago. However, to compile this project I need an outdated version of Qt (version 3.3.8). Much of the code used in this project isn't supported in the same style as Qt4. So I'd first like to obtain Qt3 before I transition to Qt4.
Ubuntu has decided to no longer carry "qt3-dev-tools". Ubuntu has limited the selection to "qt4-dev-tools" in its repository. So installing via the command line option (sudo apt-get install qt3-dev-tools) results in an error:
"Unable to locate package qt3-dev-tools."
So, from here I did some digging for a manual installation? I found a great website to help me through the process, but I'm not very knowledgeable about Ubuntu, or Linux in general. Step 1 was simple. But step 2 and onward stumped me. I'm supposed to be both adding the environment variables listed in step two to the .profile file and then setting them, correct?
In step 2, is logging in again just meant for users with the .login shell? When I type in $HOME/.qt-license of step three, I suppose I'm typing this into the terminal?. Same with the ./configure? Both of these commands return no such file exists.
Does anyone know a better walk through to install Qt3 files, or can give a quick breakdown of this tutorial?
The website tutorial:
http://krm.am.gdynia.pl/doc/qt-3.3.8/INSTALL
If u can get .rpm package then open it in ubuntu software centre . It will get installed.
http://download.qt.io/archive/qt/3/ try downloading the package for qt3 from this qt archive & install it.
I am tearing my hair out trying to install Spatialite for GeoDjango!
I am already using Homebrew, it's generally easy and convenient so I initially tried to follow the Homebrew instructions for GeoDjango.
But this stops short of installing any database, i.e. Spatialite. The next step is to try and install Spatialite itself, but there are no Homebrew-specific instructions provided by Django docs.
I found this tutorial which looks perfect - a Homebrew and virtualenv-friendly install of Spatialite for GeoDjango.
But it doesn't work... it appears that my pysqlite is linked against the non-spatial-enabled version of SQLite that comes with OS X, rather than the Spatial-ised one I installed from Homebrew, I get this error when Django tried to connect to the db:
"The pysqlite library does not support C extension loading. Both SQLite and pysqlite must be configured to allow the loading of extensions to use SpatiaLite."
The author of pysqlite hasn't responded to my pleas for help on Github and I haven't found anything via Google.
So I went back to the drawing board and decided to follow the "Mac OS X-specific instructions" in the GeoDjango docs... by installing the various geo libs from the KyngChaos binary packages.
The docs say "Install the packages in the order they are listed above" but I found I couldn't install UnixImageIO without installing PROJ first. The link in the docs to download Spatialite binaries (http://www.gaia-gis.it/spatialite-2.3.1/binaries.html) is broken so I used the "Spatialite Tools v4.1" from KyngChaos instead.
Proceeding to the next step I get this error:
$ spatialite geodjango.db "SELECT InitSpatialMetaData();"
SQLite header and source version mismatch
2013-10-17 12:57:35 c78be6d786c19073b3a6730dfe3fb1be54f5657a
2013-09-03 17:11:13 7dd4968f235d6e1ca9547cda9cf3bd570e1609ef
Not really sure what's wrong at this point.
There is someone else here on SO who has gone the KyngChaos route and just ends up with the same "Both SQLite and pysqlite must be configured to allow the loading of extensions" error I got from the Homebrew route anyway.
I found this ticket #17756 for adding pyspatialite support to Django - pyspatialite is supposed to be an easier way to pip install everything but unfortunately it doesn't work either (see comments towards bottom of ticket).
I'm a bit reluctant to start trying to build everything from source by hand as it seems likely I'll just run into the same problems again, but spending hours Googling for info about cryptic compiler errors, magic flags and paths etc along the way.
I'm about ready to give up and just use Postgres/PostGIS.
I was able to get this working now, using the tip here:
https://github.com/ghaering/pysqlite/issues/60#issuecomment-50345210
I'm not sure if it was using the real paths that fixed it, or just the Homebrew kegs or underlying packages have been updated and now install cleanly. Still, it works now.
I reproduce below the steps I took:
brew update
brew install sqlite # 3.8.5
brew install libspatialite # 4.2.0
brew install spatialite-tools # 4.1.1
git clone https://github.com/ghaering/pysqlite.git
cd pysqlite
(where brew reported I had existing versions I unlinked them and installed the latest as commented above)
then edited setup.cfg to comment out #define=SQLITE_OMIT_LOAD_EXTENSION and specify the paths:
include_dirs=/usr/local/opt/sqlite/include
library_dirs=/usr/local/opt/sqlite/lib
activated the virtualenv where I want it installed, then
python setup.py build
python setup.py install
(build_static still fails with clang: error: no such file or directory: 'sqlite3.c')
(maybe I should have done pip install . as suggested in the github issue)
now the spatialite geodjango.db "SELECT InitSpatialMetaData();" succeeds, albeit with an ignorable error:
InitSpatiaMetaData() error:"table spatial_ref_sys already exists"
i.e. it's probably not even necessary to run that command
When I was istalling this i follow this instructions https://docs.djangoproject.com/en/dev/ref/contrib/gis/install/spatialite/#pysqlite2
pysqlite2
If you’ve decided to use a newer version of pysqlite2 instead of the sqlite3 Python stdlib module, then you need to make sure it can load external extensions (i.e. the required enable_load_extension method is available so SpatiaLite can be loaded).
This might involve building it yourself. For this, download pysqlite2 2.6, and untar:
$ wget https://pypi.python.org/packages/source/p/pysqlite/pysqlite-2.6.3.tar.gz
$ tar xzf pysqlite-2.6.3.tar.gz
$ cd pysqlite-2.6.3
Next, use a text editor (e.g., emacs or vi) to edit the setup.cfg file to look like the following:
[build_ext]
#define=
include_dirs=/usr/local/include
library_dirs=/usr/local/lib
libraries=sqlite3
#define=SQLITE_OMIT_LOAD_EXTENSION
I had the same error: SQLite header and source version mismatch.
For me it was enough to update libsqlite3-dev.
After that invoking $ spatialite geo.db "SELECT InitSpatialMetaData();" creates proper database.
https://bitbucket.org/alfonse/gltut/downloads
this is the repository for the several tutorials in this online-book
http://www.arcsynthesis.org/gltut
the author uses premake as alternative to cmake, and i have tried every possible command line options but nothing works.
I don't get why the author wants to use the latest tool on earth but i need to solve this and i don't even have a clue about Lua and this tool.
For who wants to help me with this you have to download this to actually build the demos and put it in the root folder of your gltut project.
The URL for the mercurial repository is
hg clone https://bitbucket.org/alfonse/gltut
My OS is Ubuntu 12.04 64 bit.
I just noticed that the premake version that comes with Ubuntu 12.04 is the 3.7, just download a newer version from the 4.x branch and the problem is solved.
I would like to install a specific version of gdb and gcc with macports on mac os x leopard, not the last one, but the 6.8 for gdb. Is it possible?
It is possible. It's just convoluted and tedious. It's listed in the documentation these days.
Steps
Go to macports trac and find the package you're looking for. This is the link for subversion, which is the package I'll be using in the example.
Click the PortFile
Click Revision Log (top right)
Pour through the revisions until you find the version you're looking for. Remember the revision number.
In this example I'm looking for version 1.7 of subversion.
With that revision number noted. You need to checkout the version of that subdirectory at that revision.
cd /tmp
svn co http://svn.macports.org/repository/macports/trunk/dports/devel/subversion --revision 106629
Then cd into the folder and run the install
cd subversion
sudo port install
Then it should become selected by default. You can check with
sudo port installed subversion
The following ports are currently installed:
subversion #1.7.10_0 (active)
subversion #1.8.8_0
subversion #1.8.10_0
As I just came across this question when trying to figure out how to download an older version of curl, I thought I'd share an update:
The currently accepted answer did not work for me any longer. This is with MacPorts 2.2.0. What I did was the following.
I started following the directions located here. I ended up using the SVN method, since the first method didn't work. What I didn't realize is that I was missing a critical step.
I found another post that suggested moving the downloaded directory to /private/tmp. After doing this, I cd into the new directory and after a sudo port install I was able to install the older version.
I am on a Mac running OS X 10.8, so your mileage may vary.
This post is old.. but specifying a version is possible. For example I want to install ZeroMQ version 3.2.2 so I use:
sudo port install zmq #3.2.2
And it always helps to goto the MacPorts website and search to see if they have what you are looking for.
As far as I know it is not possible at all to install other versions than the exact version, unless there is a specific port for a certain version.
The only thing you could do is fetch the portfile of the desired version from the Macports subversion repository.
In your case only gdb 7.2 is available on the current version, no variants and no other versions - sorry :)