I get this error while I'm trying to login to Visual Studio 2017:
Impossible to load IEFRAME DLL
SOVLED! There is some bug (unknown) with the sign in option presented in the top right corner of the Visual Studio window. As part of opening this issue, I was directed to report this problem via Visual Studio>Help>Send Feedback>Report a problem. This openes a new instance of "Visual Studio Feedback" which required that I log in. Funny enough, it let me sign in via this interface. When I went back to Visual Studio proper, I was signed in!!! Major bug. Please fix.
Via: source
I have been using Vs 2017 for several months on dev machine. This fine morning says setup incomplete. Am I missing something?
In this case you need to go to Control Panel => Programs and Features and choose Visual Studio and update it.
VS 2017 (15.6.6) was fine for me on Friday 6/1/18 on Windows 10, but same issue as OP today after a restart.
As suggested by the dialog and Retired Ninja, I ran the Visual Studio Installer (to 15.7.3 after updating VS Installer) and that fixed it.
Note that the 15.7.3 update was a 7.73 GB download. Your download size may vary.
This has happened to me for the last 3 upgrades in Visual Studio Enterprise 2017 (now again on upgrade to 15.9.21).
The fastest fix (and I'm not sure why) is simple and doesn't bomb your settings or take for ever.
In the Visual Studio Installer, click on Modify.
Click "Modify" on the bottom right corner.
Yes it says "Total space required 0 KB".
Yes you didn't really change anything.
It will then act like it is downloading something. (not sure what)
It will then act like it is installing something. (again, not sure what)
Open Visual Studio 2017 and it works.
Hope this helps.
If you have an offline installation like me and can't simply re-run the Visual Studio Installer you can edit devenv.isolation.ini and change the last line to read SetupFinished=true. It will detect your trickery and complain, but at least it will launch again.
Edit: I ended up getting the Visual Studio Installer to fix the issue after choosing the "Download then Install" option. Maybe I was too impatient when I initially stopped the update? My above answer is useful when you need to get work done that isn't affected by the broken features, but you will likely encounter problems later on.
just had the same problem (without any reason with) vs 2019 prof, after googling and reading on that topic, just went to vsix, looked for some individual component to install/uninstall, randomly picked cloud explorer, uninstalled it and some dependent components and VS 2019 prof started normally
decided to leave this here. may be it helps somebody
Solved: I did following steps, run the visual studio and it works for me.
In my case visual studio was working fine , I just restarted the PC, this popup was keep coming when I try to open visual studio.(in my case I was using VS 2019)
Go to this path "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\Common7\IDE"
Open devenv.isolation.ini, set SetupFinished=true and save.
Now open visual studio.
Cheers!
In my case did following steps:
Clear temp files (you can %temp% in run command and Shift+Delete files)
Restart your computer
Open visual studio it will work properly.
Update: Faced problem again after couple of days, This time I go to C:\Program Files (x86)\Microsoft Visual Studio\Installer.
Click on retry.
Select one more feature which I had already installed on my Visual Studio
Click on modified and after installation it worked again.
This happened to me after I canceled a plugin update.
I solved by going to this site that has the latest update of Visual Studio.
https://learn.microsoft.com/en-us/visualstudio/releasenotes/vs2017-relnotes
I downloaded and upgraded it.
After that, Visual Studio worked.
If your VS is already upgraded, there´s an option to "repair" on the installer.
For this problem, goto uninstall screen in control panel right-click visual studio and select option change, Installer page will open now, In that window without changing anything click modify. it will solve the problem. I'm using VS Professional 2017
I got the same error today morning. This is what I did:
I ran the visual studio installer then I clicked on Modify.
The installer was showing 0KB Required. I continued and then it downloaded and installed. (Not sure what).
After that installation, it was able to launch.
I hope it works for you as well.
I was using Vs 2019 professional 16.6 and happened to me this issue one morning. I modified the installation by adding Azure Development tools even though I was not using it. This fixed the issue.
I just updated to 15.9.24 and I got this yet again, as I have my resolution above, and Visual Studio 2019 seems to be a lot better with avoid this issue. The installer for 2019 you do have to change something and do the modification, 2017 you don't have to change anything.
I reported this issue through Developer Community:
Setup not complete since 15.9.21
I don't know why but sometimes its buggy
it's up to date but after launch visual studio this error prompted !
you have to click modify in vs installer and just modify it.
its not going to download anything.
after a moment launch vs and enjoy :)
For VS2022, WIN11:
Control Panel > Programs > Programs and Features > Microsoft Visual Studio Installer
Then, click on Change and resume the previous process.
When I open an existing VS2015 solution file in VS2017, Solution Explorer is empty. I've tried to close and reopen Visual Studio several times, but the same thing happens every time. How to fix this?
This should fix it:
Close Visual Studio
Open Developer Command Prompt for VS 2017 (from Windows start menu)
Run devenv /updateconfiguration
Reopen Visual Studio
I'm experiencing the same issue. VS goes through all the steps when loading a solution, including "Preparing Solution", but then the Solution Explorer just comes up empty. So far I haven't found a solution. I tried deleting .suo files, and I tried cleaning the solution.
Like Eivind, I need to open the solution from the file menu. Fortunately, that has always worked for me so far.
Today's update for VS2017 fixed it for me. Also see https://developercommunity.visualstudio.com/content/problem/24529/solution-doesnt-open-in-vs-2017.html
I faced this type of issue when opening project on visual studio 2017.
If you have connected with TFS and I believed that your connection has been lost.
Re-connect and close the project and then reopen using visual studio.
Hope this will helpfull!
On the Notification Area there is a message for Visual Studio 2017 updates. Click on that and this fixed my problem of empty Solution Explorer when u click on a 2015 sln file.
I am try to run simple Canny Edge in Visual Studio 2015 but I failed to run it.
Severity Code Description Project File Line Suppression State
Error C3861 '__builtin_addressof': identifier not found Canny Edge C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\include\xstddef 725
I do not think this error is due to linking problem and this project is workable project which I did last time. Does anyone know how to solve it?
I had exactly the same problem with __builtin_addressof and I solved it.
Open the About in the Visual Studio 2015.
If there is an Update 3, close the Visual Studio 2015.
Open the Programs and Features in the Control Panel.
Right click on your Microsoft Visual Studio ... 2015 in the list and choose Change.
In the wizard choose Repair and continue... (It is long-running operation, I have SSD and i5 and it took several hours.)
I just lost half a day to this issue. The answer from Martin Šulc works for some people, but not for me. This is what I had to do:
Uninstall Visual Studio 2015
Run the installer, select Custom
Uncheck the Visual Studio 2015 Update 3 option (it's at the top):
My version is VS 2015 Community with Update 2. With this release at least, it seems that Update 3 is installed by default even though the installer is based on Update 2...
But are you actually surprised? ;)
I'm trying to start a performance profiling session in Visual Studio 2012 RTM on Windows 8 PRO 64-bit for a console program (ANALYZE / Start Performance Analysis).
I get a popup message informing me
Could not load file or assembly 'Microsoft.VisualStudio.PerformanceTools.CounterInfo.dll' or one of its dependencies. The Specified module could not be found.
Apparently this can happen under VS2010 after KB2645410 is installed. I carefully followed the procedure given for this issue with the same error message:
Visual Studio 2010 SP1, KB2645410 and Add-Ins
However, that does not resolve the issue.
I have tried running VS2012 as Administrator as well.
How can I get the profiler working?
UPDATE
I can actually attach to a running instance of the project from the command line using the steps here:
Walkthrough: Command-Line Profiling Using Sampling
However, Visual Studio does not open the resulting .vspx file (it just does nothing after I open it with File / Open File).
UPDATE 2
Fuslogvw reports two binding errors when I attempt to start the profiler:
VS 2012 Profiler Binding Errors - Pastebin
Adding the following to the system path resolved the issue for me permanently.
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Team Tools\Performance Tools
Some other answers may be appropriate to other situations.
Note that you probably will need to run Visual Studio as Administrator for profiling to work correctly.
I also struggled with that issue.
I found a working solution for me:
I opende the XXX.sln file using notepad.
There i found several parts in the Project and Global Section looking something like this:
ProjectSection(SolutionItems) = preProject
Performance1.psess = Performance1.psess
EndProjectSection
I removed all of them and that made my Analyzer work again.
I delete the .suo file and everythings works correctly now.
The same question exists here:
http://social.msdn.microsoft.com/Forums/en-US/a6487155-980c-4bc8-82de-2fe588fdf37f/windows-update-kb2645410-and-performance-tools-error
The following are suggested workarounds:
Remove windows update KB2645410
Only run one instance of Visual Studio
If you are the administrator on your development PC you can add the permission to Everyone to read and execute all the content in the folder "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Team Tools\Performance Tools" and subfolders/files.
"I backed everything up and did a complete repair of Visual Studio using the original disk from Microsoft. That allowed the computer to shut down normally. Then I tried the patch again. It hung again, but after a few reboots we got a message about deleting corrupt files and finally everything seems OK."
My issue was resolved when I realized that my user access control was set too high. Once that was turned off, I rebooted and it all worked great.
Once I uninstalled re-sharper my issue was resolved.