I have this function to reach a certain 1 dimensional value accelerated and damped with overshoot. That is: given an inital value, a velocity and a acceleration (force/mass), the target value is attained by accelerating to it and gets increasingly damped while getting closer to the target value.
This all works fine, howver If i want to know what the TotalAngle is after time 't' I have to run this function say N steps with a 'small' dt to find the 'limit'.
I was wondering If i can (and how) to intergrate over dt so that the TotalAngle can be determined given a time 't' initially.
Regards, Tanks for any help.
dt = delta time step per frame
input = 1
TotalAngle = 0 at t=0
Velocity = 0 at t=0
void FAccelDampedWithOvershoot::Update(float dt, float input, float& Velocity, float& TotalAngle)
{
const float Force = 500000.f;
const float DampForce = 5000.f;
const float MaxAngle = 45.f;
const float InvMass = 1.f / 162400.f;
float target = MaxAngle * input;
float ratio = (target - TotalAngle) / MaxAngle;
float fMove = Force * ratio;
float fDamp = -Velocity * DampForce;
Velocity += (fMove + fDamp) * invMass * dt;
TotalAngle += Velocity * dt;
}
Updated with fixed bugs in math
Originally I've lost mass and MaxAngle a few times. This is why you should first solve it on a paper and then enter to the SO rather than trying to solve it in the text editor.
Anyway, I've fixed the math and now it seems to work reasonably well. I put fixed solution just over previous one.
Well, this looks like a Newtonian mechanics which means differential equations. Let's try to solve them.
SO is not very friendly to math formulas and I'm a bit bored to type characters so here is what I use:
F = Force
Fd = DampForce
MA = MaxAngle
A= TotalAngle
v = Velocity
m = 1 / InvMass
' for derivative i.e. something' is 1-st derivative of something by t and something'' is 2-nd derivative
if I divide you last two lines of code by dt and merge in all the other lines I can get (I also assume that input = 1 as other case is obviously symmetrical)
v' = ([F * (1 - A / MA)] - v * Fd) / m
and applying A' = v we get
m * A'' = F(1 - A/MA) - Fd * A'
or moving to one side we get a simple 2-nd order differential equation
m * A'' + Fd * A' + F/MA * A = F
IIRC, the way to solve it is to first solve characteristic equation which here is
m * x^2 + Fd * x + F/MA = 0
x[1,2] = (-Fd +/- sqrt(Fd^2 - 4*F*m/MA))/ (2*m)
I expect that part under sqrt i.e. (Fd^2 - 4*F*m/MA) is negative thus solution should be of the following form. Let
Dm = Fd/(2*m)
K = sqrt(F/MA/m - Dm^2)
(note the negated value under sqrt so it works now) then
A(t) = e^(-Dm*t) * [P * sin(K*t) + Q * cos(K*t)] + C
where P, Q and C are some constants.
The solution is easier to find as a sum of two solutions: some specific solution for
m * A'' + Fd * A' + F/MA * A = F
and a general solution for homogeneou
m * A'' + Fd * A' + F/MA * A = 0
that makes original conditions fit. Obviously specific solution A(t) = MA works and thus C = MA. So now we need to fit P and Q of general solution to match starting conditions. To find them we need
A(0) = - MA
A'(0) = V(0) = 0
Given that e^0 = 1, sin(0) = 0 and cos(0) = 1 you get something like
Q = -MA
P = 0
or
P = 0
Q = - MA
C = MA
thus
A(t) = MA * [1 - e^(-Dm*t) * cos(K*t)]
where
Dm = Fd/(2*m)
K = sqrt(F/MA/m - Dm^2)
which kind of makes sense given your task.
Note also that this equation assumes that everything happens in radians rather than degrees (i.e. derivative of [sin(t)]' is just cos(t)) so you should transform all your constants accordingly or transform the solution.
const float Force = 500000.f * M_PI / 180;
const float DampForce = 5000.f * M_PI / 180;
const float MaxAngle = M_PI_4;
which on my machine produces
Dm = 0.000268677541
K = 0.261568546
This seems to be similar to original funcion is I step with dt = 0.01f and the main obstacle seems to be precision loss because of float
Hope this helps!
This is not a full answer and I am sure someone else can work it out, but there is no room in the comments and it may help you find a better solution.
The image below shows the velocity (blue) as your function integrates at time steps 1. The red shows the function below that calculates the value for time t
The function F(t)
F(t) = sin((t / f) * pi * 2) * (1 / (((t / f) + a) ^ c)) * b
With f = 23.7, a = 1.4, c = 2, and b= 50 that give the red plot in the image above
All the values are just approximation.
f determines the frequency and is close to a match,
a,b,c control the falloff in amplitude and are a by eye guestimate.
If it does not matter that you have a perfect match then this will work for you. totalAngle uses the same function but t has 0.25 added to it. Unfortunately I did not get any values for a,b,c for totalAngle and I did notice that it was offset so you will have to add the offset value d (I normalised everything so have no idea what the range of totalAngle was)
Function F(t) for totalAngle
F(t) = sin(((t+0.25) / f) * pi * 2) * (1 / ((((t+0.25) / f) + a) ^ c)) * b + d
Sorry only have f = 23.7, c= 2, a~1.4 nothing for b=? d=?
I'm running a simple for loop with some if statements. In this for loop, 3 variables are to be given a value depending on the index value in the for loop. It seems fairly simple, however, when I run the code, the values always come out as zero and I have no idea why this is happening. My for loop is provided below. I appreciate any suggestions.
double A [N+1];
double r;
double s;
double v;
for(int i = 2; i < N+1; i++)
{
if(i == 2)
{
r = 1/2/i/(i-1);
s = -1/2/(i*i - 1);
v = 1/4/i/(i+1);
}
else if(i <= N-2 && i > 2)
{
r = 1/4/i/(i-1);
s = -1/2/(i*i - 1);
v = 1/4/i/(i+1);
}
else if(i <= N-4 && i > N-2)
{
r = 1/4/i/(i-1);
s = 0;
v = 1/4/i/(i+1);
}
else
{
r = 1/4/i/(i-1);
s = 0;
v = 0;
}
A[i] = r*F[i-2] + s*F[i] + v*F[i+2];
cout << r << s << v << endl;
}
It’s happening because you’re using integer division. An example:
r = 1/2/i/(i-1);
This is the same as:
r = ((1 / 2) / i) / (i - 1);
Which is the same as:
r = (0 / i) / (i - 1);
… which is the same as:
r = 0 / (i - 1);
… which is 0.
Because 1 / 2 is 0 in integer arithmetic. To fix this, use floating point values.
Three things:
else if(i <= N-4 && i > N-2) makes no sense, that condition cannot hold
all your divisions are integer divisions - to fix, convert one of the numbers to a double.
as a result of 1, when i = N-1, and i = N, then the last branch is taken where you force two variables to 0 anyway!
1, 2 and 4 are integers. In integerland 1/2 = 0 and 1/4 = 0
With integers, 1/2 is zero. I would suggest (for a start) changing constants like 2 into 2.0 to ensure they're treated as doubles.
You may also want to (though it may not be necessary) cast all your i variables to floating point values as well, just for completeness, such as:
r = 1.0 / 2.0 / (double)i / ((double)i - 1.0);
The fact that r is a double in no way affects the calculations done on the right of the =. It only affects the final bit (the actual assignment).
1/2, 1/4 and -1/2 will always be zero because of the integer division.So try with 1.0/2.0, 1.0/4.0 and -1.0/2.0 to get it sorted out quickly. But follow the basics and do not use many magic numbers inside a code. Consider creating constants for them and use .
I am trying to do a project in sound processing and need to put the frequencies into another domain. Now, I have tried to implement an FFT, that didn't go well. I tried to understand the z-transform, that didn't go to well either. I read up and found DFT's a lot more simple to understand, especially the algorithm. So I coded the algorithm using examples but I do not know or think the output is right. (I don't have Matlab on here, and cannot find any resources to test it) and wondered if you guys knew if I was going in the right direction. Here is my code so far:
#include <iostream>
#include <complex>
#include <vector>
using namespace std;
const double PI = 3.141592;
vector< complex<double> > DFT(vector< complex<double> >& theData)
{
// Define the Size of the read in vector
const int S = theData.size();
// Initalise new vector with size of S
vector< complex<double> > out(S, 0);
for(unsigned i=0; (i < S); i++)
{
out[i] = complex<double>(0.0, 0.0);
for(unsigned j=0; (j < S); j++)
{
out[i] += theData[j] * polar<double>(1.0, - 2 * PI * i * j / S);
}
}
return out;
}
int main(int argc, char *argv[]) {
vector< complex<double> > numbers;
numbers.push_back(102023);
numbers.push_back(102023);
numbers.push_back(102023);
numbers.push_back(102023);
vector< complex<double> > testing = DFT(numbers);
for(unsigned i=0; (i < testing.size()); i++)
{
cout << testing[i] << endl;
}
}
The inputs are:
102023 102023
102023 102023
And the result:
(408092, 0)
(-0.0666812, -0.0666812)
(1.30764e-07, -0.133362)
(0.200044, -0.200043)
Any help or advice would be great, I'm not expecting a lot, but, anything would be great. Thank you :)
#Phorce is right here. I don't think there is any reson to reinvent the wheel. However, if you want to do this so that you understand the methodology and to have the joy of coding it yourself I can provide a FORTRAN FFT code that I developed some years ago. Of course this is not C++ and will require a translation; this should not be too difficult and should enable you to learn a lot in doing so...
Below is a Radix 4 based algorithm; this radix-4 FFT recursively partitions a DFT into four quarter-length DFTs of groups of every fourth time sample. The outputs of these shorter FFTs are reused to compute many outputs, thus greatly reducing the total computational cost. The radix-4 decimation-in-frequency FFT groups every fourth output sample into shorter-length DFTs to save computations. The radix-4 FFTs require only 75% as many complex multiplies as the radix-2 FFTs. See here for more information.
!+ FILE: RADIX4.FOR
! ===================================================================
! Discription: Radix 4 is a descreet complex Fourier transform algorithim. It
! is to be supplied with two real arrays, one for real parts of function
! one for imaginary parts: It can also unscramble transformed arrays.
! Usage: calling FASTF(XREAL,XIMAG,ISIZE,ITYPE,IFAULT); we supply the
! following:
!
! XREAL - array containing real parts of transform sequence
! XIMAG - array containing imagianry parts of transformation sequence
! ISIZE - size of transform (ISIZE = 4*2*M)
! ITYPE - +1 forward transform
! -1 reverse transform
! IFAULT - 1 if error
! - 0 otherwise
! ===================================================================
!
! Forward transform computes:
! X(k) = sum_{j=0}^{isize-1} x(j)*exp(-2ijk*pi/isize)
! Backward computes:
! x(j) = (1/isize) sum_{k=0}^{isize-1} X(k)*exp(ijk*pi/isize)
!
! Forward followed by backwards will result in the origonal sequence!
!
! ===================================================================
SUBROUTINE FASTF(XREAL,XIMAG,ISIZE,ITYPE,IFAULT)
REAL*8 XREAL(*),XIMAG(*)
INTEGER MAX2,II,IPOW
PARAMETER (MAX2 = 20)
! Check for valid transform size upto 2**(max2):
IFAULT = 1
IF(ISIZE.LT.4) THEN
print*,'FFT: Error: Data array < 4 - Too small!'
return
ENDIF
II = 4
IPOW = 2
! Prepare mod 2:
1 IF((II-ISIZE).NE.0) THEN
II = II*2
IPOW = IPOW + 1
IF(IPOW.GT.MAX2) THEN
print*,'FFT: Error: FFT1!'
return
ENDIF
GOTO 1
ENDIF
! Check for correct type:
IF(IABS(ITYPE).NE.1) THEN
print*,'FFT: Error: Wrong type of transformation!'
return
ENDIF
! No entry errors - continue:
IFAULT = 0
! call FASTG to preform transformation:
CALL FASTG(XREAL,XIMAG,ISIZE,ITYPE)
! Due to Radix 4 factorisation results are not in the same order
! after transformation as they were when the data was submitted:
! We now call SCRAM, to unscramble the reults:
CALL SCRAM(XREAL,XIMAG,ISIZE,IPOW)
return
END
!-END: RADIX4.FOR
! ===============================================================
! Discription: This is the radix 4 complex descreet fast Fourier
! transform with out unscrabling. Suitable for convolutions or other
! applications that do not require unscrambling. Designed for use
! with FASTF.FOR.
!
SUBROUTINE FASTG(XREAL,XIMAG,N,ITYPE)
INTEGER N,IFACA,IFCAB,LITLA
INTEGER I0,I1,I2,I3
REAL*8 XREAL(*),XIMAG(*),BCOS,BSIN,CW1,CW2,PI
REAL*8 SW1,SW2,SW3,TEMPR,X1,X2,X3,XS0,XS1,XS2,XS3
REAL*8 Y1,Y2,Y3,YS0,YS1,YS2,YS3,Z,ZATAN,ZFLOAT,ZSIN
ZATAN(Z) = ATAN(Z)
ZFLOAT(K) = FLOAT(K) ! Real equivalent of K.
ZSIN(Z) = SIN(Z)
PI = (4.0)*ZATAN(1.0)
IFACA = N/4
! Forward transform:
IF(ITYPE.GT.0) THEN
GOTO 5
ENDIF
! If this is for an inverse transform - conjugate the data:
DO 4, K = 1,N
XIMAG(K) = -XIMAG(K)
4 CONTINUE
5 IFCAB = IFACA*4
! Proform appropriate transformations:
Z = PI/ZFLOAT(IFCAB)
BCOS = -2.0*ZSIN(Z)**2
BSIN = ZSIN(2.0*Z)
CW1 = 1.0
SW1 = 0.0
! This is the main body of radix 4 calculations:
DO 10, LITLA = 1,IFACA
DO 8, I0 = LITLA,N,IFCAB
I1 = I0 + IFACA
I2 = I1 + IFACA
I3 = I2 + IFACA
XS0 = XREAL(I0) + XREAL(I2)
XS1 = XREAL(I0) - XREAL(I2)
YS0 = XIMAG(I0) + XIMAG(I2)
YS1 = XIMAG(I0) - XIMAG(I2)
XS2 = XREAL(I1) + XREAL(I3)
XS3 = XREAL(I1) - XREAL(I3)
YS2 = XIMAG(I1) + XIMAG(I3)
YS3 = XIMAG(I1) - XIMAG(I3)
XREAL(I0) = XS0 + XS2
XIMAG(I0) = YS0 + YS2
X1 = XS1 + YS3
Y1 = YS1 - XS3
X2 = XS0 - XS2
Y2 = YS0 - YS2
X3 = XS1 - YS3
Y3 = YS1 + XS3
IF(LITLA.GT.1) THEN
GOTO 7
ENDIF
XREAL(I2) = X1
XIMAG(I2) = Y1
XREAL(I1) = X2
XIMAG(I1) = Y2
XREAL(I3) = X3
XIMAG(I3) = Y3
GOTO 8
! Now IF required - we multiply by twiddle factors:
7 XREAL(I2) = X1*CW1 + Y1*SW1
XIMAG(I2) = Y1*CW1 - X1*SW1
XREAL(I1) = X2*CW2 + Y2*SW2
XIMAG(I1) = Y2*CW2 - X2*SW2
XREAL(I3) = X3*CW3 + Y3*SW3
XIMAG(I3) = Y3*CW3 - X3*SW3
8 CONTINUE
IF(LITLA.EQ.IFACA) THEN
GOTO 10
ENDIF
! Calculate a new set of twiddle factors:
Z = CW1*BCOS - SW1*BSIN + CW1
SW1 = BCOS*SW1 + BSIN*CW1 + SW1
TEMPR = 1.5 - 0.5*(Z*Z + SW1*SW1)
CW1 = Z*TEMPR
SW1 = SW1*TEMPR
CW2 = CW1*CW1 - SW1*SW1
SW2 = 2.0*CW1*SW1
CW3 = CW1*CW2 - SW1*SW2
SW3 = CW1*SW2 + CW2*SW1
10 CONTINUE
IF(IFACA.LE.1) THEN
GOTO 14
ENDIF
! Set up tranform split for next stage:
IFACA = IFACA/4
IF(IFACA.GT.0) THEN
GOTO 5
ENDIF
! This is the calculation of a radix two-stage:
DO 13, K = 1,N,2
TEMPR = XREAL(K) + XREAL(K + 1)
XREAL(K + 1) = XREAL(K) - XREAL(K + 1)
XREAL(K) = TEMPR
TEMPR = XIMAG(K) + XIMAG(K + 1)
XIMAG(K + 1) = XIMAG(K) - XIMAG(K + 1)
XIMAG(K) = TEMPR
13 CONTINUE
14 IF(ITYPE.GT.0) THEN
GOTO 17
ENDIF
! For the inverse case, cojugate and scale the transform:
Z = 1.0/ZFLOAT(N)
DO 16, K = 1,N
XIMAG(K) = -XIMAG(K)*Z
XREAL(K) = XREAL(K)*Z
16 CONTINUE
17 return
END
! ----------------------------------------------------------
!-END of subroutine FASTG.FOR.
! ----------------------------------------------------------
!+ FILE: SCRAM.FOR
! ==========================================================
! Discription: Subroutine for unscrambiling FFT data:
! ==========================================================
SUBROUTINE SCRAM(XREAL,XIMAG,N,IPOW)
INTEGER L(19),II,J1,J2,J3,J4,J5,J6,J7,J8,J9,J10,J11,J12
INTEGER J13,J14,J15,J16,J17,J18,J19,J20,ITOP,I
REAL*8 XREAL(*),XIMAG(*),TEMPR
EQUIVALENCE (L1,L(1)),(L2,L(2)),(L3,L(3)),(L4,L(4))
EQUIVALENCE (L5,L(5)),(L6,L(6)),(L7,L(7)),(L8,L(8))
EQUIVALENCE (L9,L(9)),(L10,L(10)),(L11,L(11)),(L12,L(12))
EQUIVALENCE (L13,L(13)),(L14,L(14)),(L15,L(15)),(L16,L(16))
EQUIVALENCE (L17,L(17)),(L18,L(18)),(L19,L(19))
II = 1
ITOP = 2**(IPOW - 1)
I = 20 - IPOW
DO 5, K = 1,I
L(K) = II
5 CONTINUE
L0 = II
I = I + 1
DO 6, K = I,19
II = II*2
L(K) = II
6 CONTINUE
II = 0
DO 9, J1 = 1,L1,L0
DO 9, J2 = J1,L2,L1
DO 9, J3 = J2,L3,L2
DO 9, J4 = J3,L4,L3
DO 9, J5 = J4,L5,L4
DO 9, J6 = J5,L6,L5
DO 9, J7 = J6,L7,L6
DO 9, J8 = J7,L8,L7
DO 9, J9 = J8,L9,L8
DO 9, J10 = J9,L10,L9
DO 9, J11 = J10,L11,L10
DO 9, J12 = J11,L12,L11
DO 9, J13 = J12,L13,L12
DO 9, J14 = J13,L14,L13
DO 9, J15 = J14,L15,L14
DO 9, J16 = J15,L16,L15
DO 9, J17 = J16,L17,L16
DO 9, J18 = J17,L18,L17
DO 9, J19 = J18,L19,L18
J20 = J19
DO 9, I = 1,2
II = II +1
IF(II.GE.J20) THEN
GOTO 8
ENDIF
! J20 is the bit reverse of II!
! Pairwise exchange:
TEMPR = XREAL(II)
XREAL(II) = XREAL(J20)
XREAL(J20) = TEMPR
TEMPR = XIMAG(II)
XIMAG(II) = XIMAG(J20)
XIMAG(J20) = TEMPR
8 J20 = J20 + ITOP
9 CONTINUE
return
END
! -------------------------------------------------------------------
!-END:
! -------------------------------------------------------------------
Going through this and understanding it will take time! I wrote this using a CalTech paper I found years ago, I cannot recall the reference I am afraid. Good luck.
I hope this helps.
Your code works.
I would give more digits for PI ( 3.1415926535898 ).
Also, you have to devide the output of the DFT summation by S, the DFT size.
Since the input series in your test is constant, the DFT output should have only one non-zero coefficient.
And indeed all the output coefficients are very small relative to the first one.
But for a large input length, this is not an efficient way of implementing the DFT.
If timing is a concern, look into the Fast Fourrier Transform for faster methods to calculate the DFT.
Your code looks right to me. I'm not sure what you were expecting for output but, given that your input is a constant value, the DFT of a constant is a DC term in bin 0 and zeroes in the remaining bins (or a close equivalent, which you have).
You might try testing you code with a longer sequence containing some type of waveform like a sine wave or a square wave. In general, however, you should consider using something like fftw in production code. Its been wrung out and highly optimized by many people for a long time. FFTs are optimized DFTs for special cases (e.g., lengths that are powers of 2).
Your code looks okey. out[0] should represent the "DC" component of your input waveform. In your case, it is 4 times bigger than the input waveform, because your normalization coefficient is 1.
The other coefficients should represent the amplitude and phase of your input waveform. The coefficients are mirrored, i.e., out[i] == out[N-i]. You can test this with the following code:
double frequency = 1; /* use other values like 2, 3, 4 etc. */
for (int i = 0; i < 16; i++)
numbers.push_back(sin((double)i / 16 * frequency * 2 * PI));
For frequency = 1, this gives:
(6.53592e-07,0)
(6.53592e-07,-8)
(6.53592e-07,1.75661e-07)
(6.53591e-07,2.70728e-07)
(6.5359e-07,3.75466e-07)
(6.5359e-07,4.95006e-07)
(6.53588e-07,6.36767e-07)
(6.53587e-07,8.12183e-07)
(6.53584e-07,1.04006e-06)
(6.53581e-07,1.35364e-06)
(6.53576e-07,1.81691e-06)
(6.53568e-07,2.56792e-06)
(6.53553e-07,3.95615e-06)
(6.53519e-07,7.1238e-06)
(6.53402e-07,1.82855e-05)
(-8.30058e-05,7.99999)
which seems correct to me: negligible DC, amplitude 8 for 1st harmonics, negligible amplitudes for other harmonics.
MoonKnight has already provided a radix-4 Decimation In Frequency Cooley-Tukey scheme in Fortran. I'm below providing a radix-2 Decimation In Frequency Cooley-Tukey scheme in Matlab.
The code is an iterative one and considers the scheme in the following figure:
A recursive approach is also possible.
As you will see, the implementation calculates also the number of performed multiplications and additions and compares it with the theoretical calculations reported in How many FLOPS for FFT?.
The code is obviously much slower than the highly optimized FFTW exploited by Matlab.
Note also that the twiddle factors omegaa^((2^(p - 1) * n)) can be calculated off-line and then restored from a lookup table, but this point is skipped in the code below.
For a Matlab implementation of an iterative radix-2 Decimation In Time Cooley-Tukey scheme, please see Implementing a Fast Fourier Transform for Option Pricing.
% --- Radix-2 Decimation In Frequency - Iterative approach
clear all
close all
clc
N = 32;
x = randn(1, N);
xoriginal = x;
xhat = zeros(1, N);
numStages = log2(N);
omegaa = exp(-1i * 2 * pi / N);
mulCount = 0;
sumCount = 0;
tic
M = N / 2;
for p = 1 : numStages;
for index = 0 : (N / (2^(p - 1))) : (N - 1);
for n = 0 : M - 1;
a = x(n + index + 1) + x(n + index + M + 1);
b = (x(n + index + 1) - x(n + index + M + 1)) .* omegaa^((2^(p - 1) * n));
x(n + 1 + index) = a;
x(n + M + 1 + index) = b;
mulCount = mulCount + 4;
sumCount = sumCount + 6;
end;
end;
M = M / 2;
end
xhat = bitrevorder(x);
timeCooleyTukey = toc;
tic
xhatcheck = fft(xoriginal);
timeFFTW = toc;
rms = 100 * sqrt(sum(sum(abs(xhat - xhatcheck).^2)) / sum(sum(abs(xhat).^2)));
fprintf('Time Cooley-Tukey = %f; \t Time FFTW = %f\n\n', timeCooleyTukey, timeFFTW);
fprintf('Theoretical multiplications count \t = %i; \t Actual multiplications count \t = %i\n', ...
2 * N * log2(N), mulCount);
fprintf('Theoretical additions count \t\t = %i; \t Actual additions count \t\t = %i\n\n', ...
3 * N * log2(N), sumCount);
fprintf('Root mean square with FFTW implementation = %.10e\n', rms);
Your code is correct to obtain the DFT.
The function you are testing is (sin ((double) i / points * frequency * 2) which corresponds to a synoid of amplitude 1, frequency 1 and sampling frequency Fs = number of points taken.
Operating with the obtained data we have:
As you can see, the DFT coefficients are symmetric with respect to the position coefficient N / 2, so only the first N / 2 provide information. The amplitude obtained by means of the module of the real and imaginary part must be divided by N and multiplied by 2 to reconstruct it. The frequencies of the coefficients will be multiples of Fs / N by the coefficient number.
If we introduce two sinusoids, one of frequency 2 and amplitude 1.3 and another of frequency 3 and amplitude 1.7.
for (int i = 0; i < 16; i++)
{
numbers.push_back(1.3 *sin((double)i / 16 * frequency1 * 2 * PI)+ 1.7 *
sin((double)i / 16 * frequency2 * 2 * PI));
}
The obtained data are:
Good luck.