I'm trying to write a RegEx that matches one of several terms, as part of a spam filter. The problem is, some of these terms contain spaces, and I'm having trouble writing a valid expression.
What I originally had (before multiple word temrs) was this:
(?i)(alzheimers|baldness|obese)
Now, I want to add, for example "blood pressure", but the following expression is chucking a barny:
(?i)(alzheimers|baldness|blood pressure|obese)
You can have whitespace characters in an either-or group, your expression works. Check it out for yourself:
https://regex101.com/r/56tz6B/1
Your expression should also match "blood pressure" without any problems.
Could you try to use \s+ instead of the space character and see if it works? Please note that this would also match any whitespace (tabs, new lines etc.).
Related
I am trying to regex the following string:
https://www.amazon.com/Tapps-Top-Apps-and-Games/dp/B00VU2BZRO/ref=sr_1_3?ie=UTF8&qid=1527813329&sr=8-3&keywords=poop
I want only B00VU2BZRO.
This substring is always going to be a 10 characters, alphanumeric, preceded by dp/.
So far I have the following regex:
[d][p][\/][0-9B][0-9A-Z]{9}
This matches dp/B00VU2BZRO
I want to match only B00VU2BZRO with no dp/
How do I regex this?
Here is one regex option which would produce an exact match of what you want:
(?<=dp\/)(.*)(?=\/)
Demo
Note that this solution makes no assumptions about the length of the path fragment occurring after dp/. If you want to match a certain number of characters, replace (.*) with (.{10}), for example.
Depending on your language/method of application, you have a couple of options.
Positive look behind. This will make your regex more complicated, but will make it match what you want exactly:
(<=dp/)[0-9A-Z]{10}
The construct (<=...) is called a positive look behind. It will not consume any of the string, but will only allow the match to happen if the pattern between the parens is matched.
Capture group. This will make the regex itself slightly simpler, but will add a step to the extraction process:
dp/([0-9A-Z]{10})
Anything between plain parens is a capture group. The entire pattern will be matched, including dp/, but most languages will give you a way of extracting the portion you are interested in.
Depending on your language, you may need to escape the forward slash (/).
As an aside, you never need to create a character class for single characters: [d][p][\/] can equally well be written as just dp\/.
I am trying to find the appropriate regex pattern that allows me to pick out whole words either starting with or ending with a comma, but leave out numbers. I've come up with ([\w]+,) which matches the first word followed by a comma, so in something like:
red,1,yellow,4
red, will match, but I am trying to find a solution that will match like like the following:
red, 1 ,yellow, 4
I haven't been able to find anything that can break strings up like this, but hopefully you'll be able to help!
This regex
,?[a-zA-Z][a-zA-Z0-9]*,?
Matches 'words' optionally enclose with commas. No spaces between commas and the 'word' are permitted and the word must start with an alphanumeric.
See here for a demo.
To ascertain that at least one comma is matched, use the alternation syntax:
(,[a-zA-Z][a-zA-Z0-9]*|[a-zA-Z][a-zA-Z0-9]*,)
Unfortunately no regex engine that i am aware of supports cascaded matching. However, since you usually operate with regexen in the context of programming environments, you could repeatedly match against a regex and take the matched substring for further matches. This can be achieved by chaining or iterated function calls using speical delimiter chars (which must be guaranteed not to occur in the test strings).
Example (Javascript):
"red, 1 ,yellow, 4, red1, 1yellow yellow"
.replace(/(,?[a-zA-Z][a-zA-Z0-9]*,?)/g, "<$1>")
.replace(/<[^,>]+>/g, "")
.replace(/>[^>]+(<|$)/g, "> $1")
.replace(/^[^<]+</g, "<")
In this example, the (simple) regex is tested for first. The call returns a sequence of preliminary matches delimted by angle brackets. Matches that do not contain the required substring (, in this case) are eliminated, as is all intervening material.
This technique might produce code that is easier to maintain than a complicated regex.
However, as a rule of thumb, if your regex gets too complicated to be easily maintained, a good guess is that it hasn't been the right tool in the first place (Many engines provide the x matching modifier that allows you to intersperse whitespace - namely line breaks and spaces - and comments at will).
The issue with your expression is that:
- \w resolves to this: [a-zA-Z0-9_]. This includes numeric data which you do not want.
- You have the comma at the end, this will match foo, but not ,foo.
To fix this, you can do something like so: (,\s*[a-z]+)|([a-z]+\s*,). An example is available here.
I am very new to regex and regular expressions, and I am stuck in a situation where I want to apply a regex on an JSF input field.
Where
alphanumeric
multiple spaces
multiple dot(.)
multiple hyphen (‐)
are allowed, and Minimum limit is 1 and Maximum limit is 5.
And for multiple values - they must be separated by comma (,)
So a Single value can be:
3kd-R
or
k3
or
-4
And multiple values (must be comma separated):
kdk30,3.K-4,ER--U,2,.I3,
By the help of stackoverflow, so far I am able to achieve only this:
(^[a-zA-Z0-9 ]{5}(,[a-zA-Z0-9 ]{5})*$)
Something like
^[-.a-zA-Z0-9 ]{1,5}(,[-.a-zA-Z0-9 ]{1,5})*$
Changes made
[-.a-zA-Z0-9 ] Added - and . to the character class so that those are matched as well.
{1,5} Quantifier, ensures that it is matched minimum 1 and maximum 5 characters
Regex demo
You've done pretty good. You need to add hyphen and dot to that first character class. Note: With the hyphen, since it delegates ranges within a character class, you need to position it where contextually it cannot be specifying a range--not to say put it where it seems like it would be an invalid range, e.g., 7-., but positionally cannot be a range, i.e., first or last. So your first character class would look something like this:
[a-zA-Z 0-9.-]{1,5} or [-a-zA-Z0-9 .]{1,5}
So, we've just defined what one segment looks like. That pattern can reoccur zero or more times. Of course, there are many ways to do that, but I would favor a regex subroutine because this allows code reuse. Now if the specs change or you're testing and realize you have to tweak that segment pattern, you only need to change it in one place.
Subroutines are not supported in BRE or ERE, but most widely-used modern regex engines support them (Perl, PCRE, Ruby, Delphi, R, PHP). They are very simple to use and understand. Basically, you just need to be able to refer to it (sound familiar? refer-back? back-reference?), so this means we need to capture the regex we wish to repeat. Then it's as simple as referring back to it, but instead of \1 which refers to the captured value (data), we want to refer to it as (?1), the capturing expression. In doing so, we've logically defined a subroutine:
([a-zA-Z 0-9.-]{1,5})(,(?1))*
So, the first group basically defines our subroutine and the second group consists of a comma followed by the same segment-definition expression we used for the first group, and that is optional ('*' is the zero-or-more quantifier).
If you operate on large quantities of data where efficiency is a consideration, don't capture when you don't have to. If your sole purpose for using parenthesis is to alternate (e.g., \b[bB](asset|eagle)\b hound) or to quantify, as in our second group, use the (?: ... ) notation, which signifies to the regex engine that this is a non-capturing group. Without going into great detail, there is a lot of overhead in maintaining the match locations--not that it's complex, per se, just potentially highly repetitive. Regex engines will match, store the information, then when the match fails, they "give up" the match and try again starting with the next matching substring. Each time they match your capture group, they're storing that information again. Okay, I'm off the soapbox now. :-)
So, we're almost there. I say "almost" because I don't have all the information. But if this should be the sole occupant of the "subject" (line, field, etc.--the data sample you're evaluating), you should anchor it to "assert" that requirement. The caret '^' is beginning of subject, and the dollar '$' is end of subject, so by encapsulating our expression in ^ ... $ we are asserting that the subject matches in it's entirety, front-to-back. These assertions have zero-length; they consume no data, only assert a relative position. You can operate on them, e.g., s/^/ / would indent your entire document two spaces. You haven't really substituted the beginning of line with two spaces, but you're able to operate on that imaginary, zero-length location. (Do some research on zero-length assertions [aka zero-width assertions, or look-arounds] to uncover a powerful feature of modern regex. For example, in the previous regex if I wanted to make sure I did not insert two spaces on blank lines: s/^(?!$)/ /)
Also, you didn't say if you need to capture the results to do something with it. My impression was it's validation only, so that's not necessary. However, if it is needed, you can wrap the entire expression in capturing parenthesis: ^( ... )$.
I'm going to provide a final solution that does not assume you need to capture but does assume the entire subject should consist of this value:
^([a-zA-Z 0-9. -]{1,5})(?:,(?1))*$
I know I went on a bit, but you said you were new to regex, so wanted to provide some detail. I hope it wasn't too much detail.
By the way, an excellent resource with tutorials is regular-expressions dot info, and a wonderful regex development and testing tool is regex101 dot com. And I can never say enough about stack overflow!
I have the following regular expression that I use but it crashes in my browsers (does nothing and then likely times out).
I am trying to accept alphanumeric, as well as dashes and single quotes. I'm also trying to restrict spacing to allow only single spaces (no more than one space consecutively)
<constant>
<constant-name>expressionFormat</constant-name>
<constant-value>^([a-zA-Z0-9'-]+\s?)*$</constant-value>
</constant>
A sample example string that crashes with this is:
"ABCDEFGHIJKLMNOPQ43 5343443RSTUVWXYZ0123456789 ‘ –"
I'm using Struts. Any tips on what I'm doing wrong? Thanks in advance!
I've found a solution.
My OLD expression:
^([a-zA-Z0-9'-]+\s?)*$
First off, I got rid of the \s since it includes other things like tabs, new lines, etc, which I do not want.
The ? is "greedy", which means if the regex fails it continues evaluating the rest of the string until it's sure it's going to return a failure... In essence, the + and ? were making it try and check recursively making it resource intensive for longer strings.
The following expression works much better for my case:
^([a-zA-Z0-9' -])*$
I believe that the browser is just taking a really long time to process the regex search and may even be timing out.
Your sample string
ABCDEFGHIJKLMNOPQ43 5343443RSTUVWXYZ0123456789 ‘ –
will not be matched by your regular expression:
^([a-zA-Z0-9'-]+\s?)*$
Add the special characters (‘ ’ — –), i.e.,
‘ ’ — –
if you want to accept them.
^([a-zA-Z0-9'‘’—–-]+\s?)*$
This regex matches your sample string.
UPDATE:
Try this regex that uses atomic grouping to avoid catastrophic backtracking:
^(?>[a-zA-Z0-9'-]+\s?)*$
I'm sure this is a simple question for someone at ease with regular expressions:
I need to match everything up until the character #
I don't want the string following the # character, just the stuff before it, and the character itself should not be matched. This is the most important part, and what I'm mainly asking. As a second question, I would also like to know how to match the rest, after the # character. But not in the same expression, because I will need that in another context.
Here's an example string:
topics/install.xml#id_install
I want only topics/install.xml. And for the second question (separate expression) I want id_install
First expression:
^([^#]*)
Second expression:
#(.*)$
[a-zA-Z0-9]*[\#]
If your string contains any other special characters you need to add them into the first square bracket escaped.
I don't use C#, but i will assume that it uses pcre... if so,
"([^#]*)#.*"
with a call to 'match'. A call to 'search' does not need the trailing ".*"
The parens define the 'keep group'; the [^#] means any character that is not a '#'
You probably tried something like
"(.*)#.*"
and found that it fails when multiple '#' signs are present (keeping the leading '#'s)?
That is because ".*" is greedy, and will match as much as it can.
Your matcher should have a method that looks something like 'group(...)'. Most matchers
return the entire matched sequence as group(0), the first paren-matched group as group(1),
and so forth.
PCRE is so important i strongly encourage you to search for it on google, learn it, and always have it in your programming toolkit.
Use look ahead and look behind:
To get all characters up to, but not including the pound (#): .*?(?=\#)
To get all characters following, but not including the pound (#): (?<=\#).*
If you don't mind using groups, you can do it all in one shot:
(.*?)\#(.*) Your answers will be in group(1) and group(2). Notice the non-greedy construct, *?, which will attempt to match as little as possible instead of as much as possible.
If you want to allow for missing # section, use ([^\#]*)(?:\#(.*))?. It uses a non-collecting group to test the second half, and if it finds it, returns everything after the pound.
Honestly though, for you situation, it is probably easier to use the Split method provided in String.
More on lookahead and lookbehind
first:
/[^\#]*(?=\#)/ edit: is faster than /.*?(?=\#)/
second:
/(?<=\#).*/
For something like this in C# I would usually skip the regular expressions stuff altogether and do something like:
string[] split = exampleString.Split('#');
string firstString = split[0];
string secondString = split[1];