I use RETSConnector to diagnose RETS server feeds. Some are IP restricted. I am trying to access these feeds through an AWS Windows 7 Workspace. You can connect with a proxy server, but it doesn't seem to affect the IP the space is reporting. So my question is, is there anyway I can get AWS Workspace/Windows 7 to reports the proxy server IP internally, thus allowing me to utilize the IP that is already stored in various vendor accounts.
This is really a networking issue, you would need to setup a VPN in one of the whitelisted networks.
Related
AWS and network noob. I've been asked to migrate QuickBooks Desktop Enterprise to AWS. This seems easy in principle but I'm finding a lot of conflicting and confusing information on how best to do it. The requirements are:
Setup a Windows Server using AWS EC2
QuickBooks will be installed on the server, including a file share that users will map to.
Configure VPN connectivity so that the EC2 instance appears and behaves as if it were on prem.
Allow additional off site VPN connectivity as needed for ad hoc remote access
Cost is a major consideration, which is why I am doing this instead of getting someone who knows this stuff.
The on-prem network is very small - one Win2008R2 server (I know...) that hosts QB now and acts as a file server, 10-15 PCs/printers and a Netgear Nighthawk router with a static IP.
My approach was to first create a new VPC with a private subnet that will contain the EC2 instance and setup a site-to-site VPN connection with the Nighthawk for the on-prem users. I'm unclear as to if I also need to create security group rules to only allow inbound traffic (UDP,TCP file sharing ports) from the static IP or if the VPN negates that need.
I'm trying to test this one step at a time and have an instance setup now. I am remote and am using my current IP address in the security group rules for the test (no VPN yet). I setup the file share but I am unable to access it from my computer. I can RDP and ping it and have turned on the firewall rules to allow NB and SMB but still nothing. I just read another thread that says I need to setup a storage gateway but before I do that, I wanted to see if that is really required or if there's another/better approach. I have to believe this is a common requirement but I seem to be missing something.
This is a bad approach for QuickBooks. Intuit explicitly recommends against using QuickBooks with a file share via VPN:
Networks that are NOT recommended
Virtual Private Network (VPN) Connects computers over long distances via the Internet using an encrypted tunnel.
From here: https://quickbooks.intuit.com/learn-support/en-us/configure-for-multiple-users/recommended-networks-for-quickbooks/00/203276
The correct approach here is to host QuickBooks on the EC2 instance, and let people RDP (remote desktop) into the EC2 Windows server to use QuickBooks. Do not let them install QuickBooks on their client machines and access the QuickBooks data file over the VPN link. Make them RDP directly to the QuickBooks server and access it from there.
I have an AWS Client VPN set up using certificate auth. I'm setting this up for a client-client access system, essentially as is described in this AWS scenario/example. It's all working, and I can ping from one client to another if I know their IP address.
My question is: in actual use, what use is this system if clients get assigned a random IP address every time they connect to the VPN, and there's no way to tell which clients are connected or what their IP addresses are without checking the AWS console or using the describe-client-vpn-connections CLI (which requires IAM credentials)?
Is there any way to:
Assign static IP addresses to specific clients, so they receive the same one every time they connect to the VPN?
Get a list of connected clients (with their CommonName and IP address)?
Use a connected client's host name / computer name instead of their random VPN IP address?
Any other way to connect from one client to another without having to use the AWS Console or describe-client-vpn-connections CLI to get a list of connected clients?
Much of what you're asking for is not possible. In many organizations, client-to-client communication is not the norm. For client-to-server communication, AWS Client VPN works well.
There is no way to assign static IP addresses to specific clients.
You can get a list of current connections and client IP addresses with the following AWS CLI command:
aws ec2 describe-client-vpn-connections --client-vpn-endpoint-id (endpoint ID)
You might be able to get your clients to register via a shared DNS server to get their VPN IP address.
I suspect you'll have better luck rolling your own VPN solution with something like OpenVPN, which much of the AWS Client VPN is built off of.
Currently my projects in Cloud Run that make external requests come out with random IP from Google IP's pool.
A new micro-service that I am developing that needs to make an external request on a critical external micro-service that is limited by IP.
Google Cloud Platform has any solution to channel the output from a specific IP to the outside? Some kind of proxy for these kinds of needs?
Thanks
As clarified in this other case here, there is no way to directly setup a static or specific IP for outbound requests for Cloud Run. The only possibility as clarified in this answer from a Google's developer, unless Cloud Run starts supporting Cloud NAT or Serverless VPC Access, you won't be able to achieve such configuration.
There are some workarounds.
One of them would be to create a SOCKS proxy by running a ssh client that routes the traffic through a GCE VM instance that has a static external IP address. More details here.
Another solution is to send your outbound requests through a proxy that has a static IP. You can get details here.
Both these two were provided by developers from Google, so they should be good to go and use it.
We have a very difficult problem here, we have a Windows Server 2019 Base x64 on Amazon EC2, connected through RDP and setup-ed forest and activated AD DS , also activated DNS. But whenever we try to connect we are not allowed to.
We have opened all the relevant ports on inbound traffic rules.
We have added users.
We have tried searching internet and various tutorials.
In Server Manager=:
Added the public ipv4 address to our ipv4 settings of the adapter.
Went to the computer setting in computer domain entered the domain but no fun.
Disabled the firewall in server manager.
We want to connect our clients on different network to connect to the server hosted else-where on AWS.
We are really new into this can some one guide through this?
Please make sure there is network connectivity between your client and you DC which is set up on EC-2 Instance.
[1] In case your clients are on AWS (meaning different EC-2 Instances), and in a different network, you need to create VPC peering or use Transit Gateway, so that it has proper network connectivity.
[2] In case your clients are not on AWS, and in an On-prem Environment, you need to have a VPN connection between your client and your DC.
So in Summary, you need to have network connectivity between your client and DC so that clients can join your Domain.
What do you mean whenever we try to connect we are not allowed to?
What are you trying to connect to, the Windows EC2 instance?
Are you saying that the instance is joined to AWS Directory Service domain but you can't connect to the instance using one of the users in your AWS directory?
Edit: This should have been a comment but couldn't post comments at the time of answering.
I have a single Windows Amazon EC2 instance and one public IP. The instance is running multiple web server EXEs which all sit on port 80. I want to have different domain names which I want to point to each server. On my old dedicated server I achieved this simply by having different public IPs, but with Amazon EC2 I want to keep to just one public IP.
I am not using IIS, Apache, etc. otherwise life would be a lot simpler (I would simply bind hostnames accordingly). The web server executables perform unusual "utility" tasks as part of a range of other websites, but still need to be hosted on port 80. There is no configuration other than address to bind to and port #.
I have setup several private IPs and bound each server application to those private IPs. Is it possible to leverage some of the Amazon networking products to direct the traffic to the correct private IP? e.g. I have tried setting up a private-DNS using Amazon Route53, and internally at least this seems to point to the correct servers - but not (perhaps logically) when I try to access the site externally.
In absence of any other solutions I decided to solve this using the blunt hammer approach and use a reverse proxy. Downside is my servers now only see the user IPs as 127.0.0.1 which was less than ideal, but better than nothing at all.
For my reverse proxy I used Redbird (uses node.js) but Nginx may also be an option. Both are free / open source.