So I have this macro: stab_index(yearmonth,period).
Let's say that I have to run it 5 times (maybe more) with different parameters like this
%stab_index(201601,01/2016);
%stab_index(201602,02/2016);
%stab_index(201603,03/2016);
%stab_index(201604,04/2016);
%stab_index(201605,05/2016);
in order to generate a adequate dataset to run another macro: Stab_Ind_DYNAMICS.
But I don't want to run 6 times to get the result, I would like to run all of them at once without having to fill the parameters every time.
Can someone point me in the direction of how I would set this up?
Thanks!
This assumes your parameter values always exist within your data. If you can get your dataset down to every unique combination of yearmonth and period (how my unique dataset looks below), then you don't need to input anything, just let the data do the work which can accommodate changing data:
** create test data **;
data have0;
year = 2016;
do i=1 to 12;
temp=i;
output;
end;
run;
data have; set have0;
temp1 = strip(put(year,best4.))||strip(put(temp,z2.));
yearmonth=intnx('month', input(put(temp1,6.), yymmn6.), 1)-1;
period=yearmonth;
format yearmonth yymmn6. period mmyys7.;
run;
** get data down to every unique combination of yearmonth and period **;
proc sort data = have out=unique(keep=yearmonth period) nodupkey;
by yearmonth period;
run;
** create a macro string dynamically using data **;
data create_macro_string; set unique;
macro_str=%nrstr("%stab_index")||"("||strip(put(yearmonth,yymmn6.))||","||strip(put(period,mmyys7.))||");";
keep yearmonth period macro_str;
run;
** put all your macros into a list **;
proc sql noprint;
select macro_str
into: macro_list separated by " "
from create_macro_string;
quit;
** call your macros **;
%put ¯o_list.;
You can achieve this with another macro which loops trough your list of parameters.
%let param1 = 201601 201602 201603 201604 201605;
%let param2 = 01/2016 02/2016 03/2016 04/2016 05/2016;
%macro loop();
%do i=1 %to %sysfunc(countw(¶m1,%str( )));
%let thisparam1=%scan(¶m1,&i,%str( ));
%let thisparam2=%scan(¶m2,&i,%str( ));
%put &thisparam1 &thisparam2;
%stab_index(&thisparam1,&thisparam2);
%end;
%mend loop;
%loop;
You first need to define your lists of parameters (I called them param1 & param2 here).
Then you can loop from 1 to the number of words and retrieve the i'th paramter from the list and use it in your stab_index macro.
Just in case you parameters contains spaces, you can use another separator than spaces for your lists and define it with a 2nd argument in the countw function (%sysfunc(countw(¶m1,'-'))) and a third parameter in the scan function (%scan(¶m1,&i,'-')).
Related
I want to sweep each table in a libname and calculate a hash over each row.
For that purpose, i have already a table with libname, memname, concatenated columns with ',' and number of observations
libname
memname
columns
num_obs
lib_A
table_A
col1a,col2a...colna
1
lib_A
table_B
col1b,col2b...colnb
2
lib_B
table_C
col1c,col2c...colnc
1
I first get all data into ranged macro variables (i think its easier to work, but could be wrong, ofc)
proc sql;
select libname, memname, columns, num_obs
into :lib1-, :tab1-, :column1-, :sqlobs1-
from have
where libname="&sel_livraria"; /*macro var = prompt from user*/
quit;
Just for developing guideline i made the code just to check one specific table without getting the row number of it since with a simple counter doesn't work (i get the order of the rows mess up each time i run) and it works for that purpose
%let lib=lib_A;
%let tab=table_B;
%let columns=col1b,col2b,colnb;
data want;
length check $32.;
format check $hex32.;
set &lib..&tab;
libname="&lib";
memname="&tab";
check = md5(cats(&columns));
hash = put(check,$hex32.);
keep libname memname hash;
put hash;
put _all_;
run;
So, what’s the best approach for getting a MD5 from each row (same order as tables) of all tables in a libname? I saw problems i couldn’t overcame using data steps, procs or macros.
The result i wanted if lib_A was selected in prompt were something like:
libname
memname
obs_row
hash
lib_A
table_A
1
64A29CCA15F53C83A9583841294A26AA
lib_A
table_B
1
80DAC7B9854CF71A67F9C00A7EC4D9EF
lib_A
table_B
2
0AC44CD79DAB2E33C93BB2312D3A9A40
Need some help.
Tks in advance.
You're pretty close. This is how I would approach it. We'll create a macro with three parameters: data, lib, and out. data is the dataset you have with the column information. lib is the library you want to pull from your dataset, and out is the output dataset that you want to have.
We'll read each column into an individual macro variable:
memname1
memname2
memname3
libname1
libname2
libname3
etc.
From here, we simply need to loop over all of the macro variables and apply them where appropriate. We can easily count how many there are in a data step. All we need to do is add double-ampersands to resolve them correctly. For more information on why this is, check out this MWSUG paper.
%macro get_md5(data=, lib=, out=);
/* Save all variables into macro variables:
memname1 memname2 ...
columns1 columns2 ...
*/
data _null_;
set &data.;
where upcase(libname)=upcase("&lib.");
call symputx(cats('memname', _N_), memname);
call symputx(cats('columns', _N_), columns);
call symputx(cats('obs', _N_), obs);
call symputx('n_datasets', _N_);
run;
/* Loop through all the datasets and access each macro variable */
%do i = 1 %to &n_datasets.;
/* Double ampersand needed:
First, resolve &i. to get &memname1
Then resolve &mename1 to get the value stored in the macro variable memname1
*/
%let memname = &&memname&i.;
%let columns = &&columns&i.;
%let obs = &&obs&i.;
/* Calculate md5 in a temporary dataset */
data _tmp_;
length lib $8.
memname $32.
obs_row 8.
hash $32.
;
set &lib..&memname.(obs=&obs.);
lib = "&lib.";
memname = "&memname.";
obs_row = _N_;
hash = put(md5(cats(&columns.)), $hex32.);
keep libname memname obs_row hash;
run;
/* Overwrite the dataset so we don't keep appending */
%if(&i. = 1) %then %do;
data &out.;
set _tmp_;
run;
%end;
%else %do;
proc append base=&out. data=_tmp_;
run;
%end;
%end;
/* Remove temporary data */
proc datasets lib=work nolist;
delete _tmp_;
quit;
%mend;
Example:
data have;
length libname memname columns $15.;
input libname$ memname$ columns$ obs;
datalines;
sashelp cars make,model,msrp 1
sashelp class age,height,name 2
sashelp comet dose,length,sample 1
;
run;
%get_md5(data=have, lib=sashelp, out=want);
Output:
libname memname obs_row hash
sashelp cars 1 258DADA4843E7068ABAF95667E881B7F
sashelp class 1 29E8F4F03AD2275C0F191FE3DAA03778
sashelp class 2 DB664382B88BE7E445418B1A1C8CE13B
sashelp comet 1 210394B77E7696506FDEFD78890A8AB9
I would make a macro that takes as input the four values in your metadata dataset. Note that commas are anathema to SAS programs, especially macro code, so make the macro so it can accept space delimited variable lists (like normal SAS program statements do).
To reduce the risk of name conflict I will name the variable using triple underscores and then rename them back to human friendly names when the dataset is written.
%macro next_ds(libname,memname,num_obs,varlist);
data next_ds;
length ___1 $8 ___2 $32 ___3 8 ___4 $32 ;
___1 = "&libname";
___2 = "&memname";
___3 + 1;
set &libname..&memname(obs=&num_obs keep=&varlist);
___4 = put(md5(cats(of &varlist)),$hex32.);
keep ___1-___4 ;
rename ___1=libname ___2=memname ___3=obs_row ___4=hash;
run;
%mend next_ds;
Let's make some test metadata that reference datasets everyone should have.
data have;
infile cards truncover ;
input libname :$8. memname :$32. num_obs columns $200.;
cards;
sashelp class 3 name,sex,age
sashelp cars 2 make,model
;
And make sure the target dataset does not already exists.
%if %sysfunc(exist(want)) %then %do;
proc delete data=want; run;
%end;
Now you can call that macro once for each observation in your source metadata dataset. There is no need to generated oodles of macro variables. Instead you can use CALL EXECUTE() to generate the macro calls directly from the dataset.
We can replace the commas in the column lists when making the macro call. You can add in a PROC APPEND step after each macro call to aggregate the results into a single dataset.
data _null_;
set have;
call execute(cats(
'%nrstr(%next_ds)(',libname,',',memname,',',num_obs
,',',translate(columns,' ',','),')'
));
call execute('proc append data=next_ds base=want force; run;');
run;
Notice that wrapping the macro call in %NRSTR() makes the SAS log easier to read.
1 + %next_ds(sashelp,class,3,name sex age)
2 + proc append data=next_ds base=want force; run;
3 + %next_ds(sashelp,cars,2,make model)
4 + proc append data=next_ds base=want force; run;
Results:
Obs libname memname obs_row hash
1 sashelp class 1 5425E9CEDA1DDEB71B2692A3C7050A8A
2 sashelp class 2 C532D227D358A3764C2D225DC8C02D18
3 sashelp class 3 13AD5F1517E0C4494780773B6DC15211
4 sashelp cars 1 777C60693BF5E16F38706C89301CD0A8
5 sashelp cars 2 07080C9321145395D1A2BCC10FBE6B83
Note that CATS() might not be the best method for generating the string to pass to the MD5() function. That can generate the same string for different combinations of the source variables. For example 'AB' || 'CD' is the same as 'A' || 'BCD'. Perhaps just use CAT() instead.
Stu's approach is nice, and will work most of the time but will fall over when you have wiiiide variables, a large number of variables, variables with large precision, and other edge cases.
So for the actual hashing part, you might consider this macro, which is extensively tested within Data Controller for SAS:
https://core.sasjs.io/mp__md5_8sas.html
Usage:
data _null_;
set sashelp.class;
hashvar=%mp_md5(cvars=name sex, nvars=age height weight);
put hashvar=;
run;
I have a set of input macro variables in SAS. They are dynamic and generated based on the user selection in a sas stored process.
For example:There are 10 input values 1 to 10.
The name of the macro variable is VAR_. If a user selects 2,5,7 then 4 macro variables are created.
&VAR_0=3;
&VAR_=2;
&VAR_1=5;
&VAR_2=7;
The first one with suffix 0 provides the count. The next 3 provides the values.
Note:If a user select only one value then only one macro variable is created. For example If a user selects 9 then &var_=9; will be created. There will not be any count macro variable.
I am trying to create a sas table using these variables.
It should be like this
OBS VAR
-----------
1 2
2 5
3 7
-----------
This is what I tried. Not sure if this is the right way to do approach it.
It doesn't give me a final solution but I can atleast get the name of the macro variables in a table. How can I get their values ?
data tbl1;
do I=1 to &var_0;
VAR=CAT('&VAR_',I-1);
OUTPUT;
END;
RUN;
PROC SQL;
CREATE TABLE TBL2 AS
SELECT I,
CASE WHEN VAR= '&VAR_0' THEN '&VAR_' ELSE VAR END AS VAR
from TBL1;
QUIT;
Thank You for your help.
Jay
SAS helpfully stores them in a table for you already, you just need to parse out the ones you want. The table is called SASHELP.VMACRO or DICTIONARY.MACROS
Here's an example:
%let var=1;
%let var2=3;
%let var4=5;
proc sql;
create table want as
select * from sashelp.vmacro
where name like 'VAR%';
quit;
proc print data=want;
run;
I think the real issue is the inconsistent behavior of the stored process. It only creates the 0 and 1 variable when there are multiple selections. I think that your example is a little off. If the value of VAR_0 is three then their should be a VAR_3 macro variable. Also the value of VAR_ and VAR_1 should be set to the same thing.
To fix this in the past I have done something like this. First let's assign the parameter name a macro variable so that the code is reusable for other programs.
%let name=VAR_;
Then first make sure the minimal macro variables exist.
%global &name &name.0 &name.1 ;
Then make sure that you have a count by setting the 0 variable to 1 when it is empty.
%let &name.0 = %scan(&&&name.0 1,1);
Then make sure that you have a 1 variable. Since it should have the same value as the macro variable without a suffix just re-assign it.
%let &name.1 = &&&name ;
Now your data step is easier.
data want ;
length var $32 value $200 ;
do i=1 to &&&name.0 ;
var=cats(symget('name'),i);
value=symget(var);
output;
end;
run;
I don't understand your numbering scheme and recommend changing it, if you can; the &var_ variable is very confusing.
Anyway, the easiest way to do this is SYMGET. That returns a value from the macro symbol table which you can specify at runtime.
%let VAR_0=3;
%let VAR_=2;
%let VAR_1=5;
%let VAR_2=7;
data want;
do obs = 1 to &var_0.;
var = input(symget(cats('VAR_',ifc(obs=1,'',put(obs-1,2.)))),2.);
output;
end;
run;
I have multiple tables in a library call snap1:
cust1, cust2, cust3, etc
I want to generate a loop that gets the records' count of the same column in each of these tables and then insert the results into a different table.
My desired output is:
Table Count
cust1 5,000
cust2 5,555
cust3 6,000
I'm trying this but its not working:
%macro sqlloop(data, byvar);
proc sql noprint;
select &byvar.into:_values SEPARATED by '_'
from %data.;
quit;
data_&values.;
set &data;
select (%byvar);
%do i=1 %to %sysfunc(count(_&_values.,_));
%let var = %sysfunc(scan(_&_values.,&i.));
output &var.;
%end;
end;
run;
%mend;
%sqlloop(data=libsnap, byvar=membername);
First off, if you just want the number of observations, you can get that trivially from dictionary.tables or sashelp.vtable without any loops.
proc sql;
select memname, nlobs
from dictionary.tables
where libname='SNAP1';
quit;
This is fine to retrieve number of rows if you haven't done anything that would cause the number of logical observations to differ - usually a delete in proc sql.
Second, if you're interested in the number of valid responses, there are easier non-loopy ways too.
For example, given whatever query that you can write determining your table names, we can just put them all in a set statement and count in a simple data step.
%let varname=mycol; *the column you are counting;
%let libname=snap1;
proc sql;
select cats("&libname..",memname)
into :tables separated by ' '
from dictionary.tables
where libname=upcase("&libname.");
quit;
data counts;
set &tables. indsname=ds_name end=eof; *9.3 or later;
retain count dataset_name;
if _n_=1 then count=0;
if ds_name ne lag(ds_name) and _n_ ne 1 then do;
output;
count=0;
end;
dataset_name=ds_name;
count = count + ifn(&varname.,1,1,0); *true, false, missing; *false is 0 only;
if eof then output;
keep count dataset_name;
run;
Macros are rarely needed for this sort of thing, and macro loops like you're writing even less so.
If you did want to write a macro, the easier way to do it is:
Write code to do it once, for one dataset
Wrap that in a macro that takes a parameter (dataset name)
Create macro calls for that macro as needed
That way you don't have to deal with %scan and troubleshooting macro code that's hard to debug. You write something that works once, then just call it several times.
proc sql;
select cats('%mymacro(name=',"&libname..",memname,')')
into :macrocalls separated by ' '
from dictionary.tables
where libname=upcase("&libname.");
quit;
¯ocalls.;
Assuming you have a macro, %mymacro, which does whatever counting you want for one dataset.
* Updated *
In the future, please post the log so we can see what is specifically not working. I can see some issues in your code, particularly where your macro variables are being declared, and a select statement that is not doing anything. Here is an alternative process to achieve your goal:
Step 1: Read all of the customer datasets in the snap1 library into a macro variable:
proc sql noprint;
select memname
into :total_cust separated by ' '
from sashelp.vmember
where upcase(memname) LIKE 'CUST%'
AND upcase(libname) = 'SNAP1';
quit;
Step 2: Count the total number of obs in each data set, output to permanent table:
%macro count_obs;
%do i = 1 %to %sysfunc(countw(&total_cust) );
%let dsname = %scan(&total_cust, &i);
%let dsid=%sysfunc(open(&dsname) );
%let nobs=%sysfunc(attrn(&dsid,nobs) );
%let rc=%sysfunc(close(&dsid) );
data _total_obs;
length Member_Name $15.;
Member_Name = "&dsname";
Total_Obs = &nobs;
format Total_Obs comma8.;
run;
proc append base=Total_Obs
data=_total_obs;
run;
%end;
proc datasets lib=work nolist;
delete _total_obs;
quit;
%mend;
%count_obs;
You will need to delete the permanent table Total_Obs if it already exists, but you can add code to handle that if you wish.
If you want to get the total number of non-missing observations for a particular column, do the same code as above, but delete the 3 %let statements below %let dsname = and replace the data step with:
data _total_obs;
length Member_Name $7.;
set snap1.&dsname end=eof;
retain Member_Name "&dsname";
if(NOT missing(var) ) then Total_Obs+1;
if(eof);
format Total_Obs comma8.;
run;
(Update: Fixed %do loop in step 2)
UPDATE I've been told this isn't possible using arrays because of they way they are stored. This changes my question a bit, but the gist is still the same. How can I most efficiently generate the tables I need from a given vector of values (ex: day, week, month, year) without just repeating the code multiple times? Is there any way to simply substitute the given date value into INTX in a loop?
Ok, this is my last question on this subject, I promise. After some good advice, I'm using the INTX function. However, I'd like to just loop through the different categories I select and create tables. I tried this, but to no avail.
data;
array period [*] $ day week month year;
run;
%MACRO sqlloop;
proc sql;
%DO k = 1 %TO dim(&period); /* in case i decide to drop/add from array later */
%LET bucket = &period[&k];
CREATE TABLE output.t_&bucket AS (
SELECT INTX( "&bucket.", date_field, O, 'E') AS test FROM table);
%END
quit;
%MEND
%sqlloop
Sadly this doesn't work because I'm fouling up the array reference somehow. If I can get this step I'll be in good shape.
You could replace your array with a macro variable string:
%let period=day week month year;
In your macro then, you loop over the words in the macro variable:
%MACRO sqlloop;
proc sql;
%DO k = 1 %TO %sysfunc(countw(&period.)); /*fixed extra s*/
%LET bucket = %scan(&period.,&k.);
CREATE TABLE output.t_&bucket AS (
SELECT INTNX( "&bucket.", date_field, 0, 'E') AS test FROM table);
%END;
quit;
%MEND;
%sqlloop
edit you forgot some semicolons apparently. :p
How can you create a SAS data set from another dataset using only the last n observations from original dataset. This is easy when you know the value of n. If I don't know 'n' how can this be done?
This assumes you have a macro variable that says how many observations you want. NOBS tells you the number of observations in the dataset currently without reading the whole thing.
%let obswant=5;
data want;
set sashelp.class nobs=obscount;
if _n_ gt (obscount-&obswant.);
run;
Using Joe's example of a macro variable to specify the number of observations you want, here is another answer:
%let obswant = 10;
data want;
do _i_=nobs-(&obswant-1) to nobs;
set have point=_i_ nobs=nobs;
output;
end;
stop; /* Needed to stop data step */
run;
This should perform better since it only reads the specific observations you want.
If the dataset is large, you might not want to read the whole dataset. Instead you could try a construction that reads the total number of Observations in the dataset first. So if you want to have the last of observations:
data t;
input x;
datalines;
1
2
3
4
;
%let dsid=%sysfunc(open(t));
%let num=%sysfunc(attrn(&dsid,nlobs));
%let rc=%sysfunc(close(&dsid));
%let number = 2;
data tt;
set t (firstobs = %eval(&num.-&number.+1));
run;
For the sake of variety, here's another approach (not necessarily a better one)
%let obswant=5;
proc sql noprint;
select nlobs-&obswant.+1 into :obscalc
from dictionary.tables
where libname='SASHELP' and upcase(memname)='CLASS';
quit;
data want;
set sashelp.class (firstobs=&obscalc.);
run;
You can achive this using the
_nobs_ and _n_ variables. First, create a temporary variable to store the total no of obs. Then compare the automatic variable N to nobs.
data a;
set sashelp.class nobs=_nobs_;
if _N_ gt _nobs_ -5;
run;