I'm working on a project where I'm converting an implementation of a binary tree to an AVL tree, so I have a few files that contain lines like:
Tree<int>* p = new Tree<int>(*t);
all over the place. The goal I have in mind is to use a vim regex to turn all instances of the string Tree into the string AVLTree, so the line above would become:
AVLTree<int>* p = new AVLTree<int>(*t);
the regex I tried was :%s/Tree/AVLTree/g, but the result was:
AVLTree<int>* p = new Tree<int>(*t);
I looks to me like when vim finds something to replace on a line it jumps to the next one, so is there a way to match multiple strings on the same line? I realize that this can be accomplished with multiple regex's, so my question is mostly academic.
Credit on this one goes to Marth for pointing this out. My issue was with vim's gdefault. By default it's set to 'off', which means you need the /g tag to make your search global, which is what I wanted. I think mine was set to 'on', which means without the tag the search is global, but with the tag the search is not. I found this chart from :help 'gdefault' helpful:
command 'gdefault' on 'gdefault' off
:s/// subst. all subst. one
:s///g subst. one subst. all
:s///gg subst. all subst. one
Related
I am trying to search a text file that will return a result if more than one word is found in that line. I don't see this explained in the documentation and I have tried various loops with no success.
What I would like to do is something similar to this:
$read(name.txt, s, word1|word2|word3)
or even something like this:
$read(name.txt, w, word1*|*word2*|*word3)
I don't know RegEx that well so I'm assuming this can be done with that but I don't know how to do that.
The documentation in the client self is good but I also recommend this site: http://en.wikichip.org/wiki/mirc. And with your problem there is a nice article : http://en.wikichip.org/wiki/mirc/text_files
All the info is taken from there. So credits to wikichip.
alias testForString {
while ($read(file.txt, nw, *test*, $calc($readn + 1))) {
var %line = $v1
; you can add your own words in the regex, seperate them with a pipe (|)
noop $regex(%line,/(word1|word2|word3|test)/))
echo -a Amount of results: $regml(0)
}
}
$readn is an identifier that returns the line that $read() matched. It is used to start searching for the pattern on the next line. Which is in this case test.
In the code above, $readn starts at 0. We use $calc() to start at line 1. Every match $read() will start searching on the next line. When no more matches are after the line specified $read will return $null - terminating the loop.
The w switch is used to use a wildcard in your search
The n switch prevents evaluating the text it reads as if it was mSL code. In almost EVERY case you must use the n switch. Except if you really need it. Improper use of the $read() identifier without the 'n' switch could leave your script highly vulnerable.
The result is stored in a variable named %line to use it later in case you need it.
After that we use a noop to execute a regex to match your needs. In this case you can use $regml(0) to find the amount of matches which are specified in your regex search. Using an if-statement you can see if there are two or more matches.
Hope you find this helpful, if there's anything unclear, I will try to explain it better.
EDIT
#cp022
I can't comment, so I'll post my comment here, so how does that help in any way to read content from a text file?
I have a text file in Notepad++ that contains about 66,000 words all in 1 line, and it is a set of 200 "lines" of output that are all unique and placed in 1 line in the basic JSON form {output:[{output1},{output2},...}]}.
There is a set of characters matching the RegEx expression "id":.........,"kind":"track" that occurs about 285 times in total, and I am trying to either single them out, or copy all of them at once.
Basically, without some super complicated RegEx terms, I am stuck because I can't figure out how to highlight all of them at once, and also the Remove Unbookmarked Lines feature does not apply because this is all in one line. I have only managed to be able to Mark every single occurrence.
So does this require a large number of steps to get the file into multiple lines and work from there, or is there something else I am missing?
Edit: I have come up with a set of Macro schemes that make the process of doing this manually work much faster. It's another alternative but still takes a few steps and quite some time.
Edit 2: I intended there to be an answer for actually just highlighting the different sections all at once, but I guess that it not possible. The answer here turns out to be more useful in my case, allowing me to have a list of IDs without everything else.
You seem to already have a regex which matches single instances of your pattern, so assuming it works and that we must use Notepad++ for this:
Replace .*?("id":.........,"kind":"track").*?(?="id".........,"kind":"track"|$) with \1.
If this textfile is valid JSON, this opens you up to other, non-notepad++ options, like using Python with the json module.
Edited to remove unnecessary steps
I'm trying to change the case of method names for some functions from lowercase_with_underscores to lowerCamelCase for lines that begin with public function get_method_name(). I'm struggling to get this done in a single step.
So far I have used the following
:%s/\(get\)\([a-zA-Z]*\)_\(\w\)/\1\2\u\3/g
However, this only replaces one _ character at a time. What I would like it a search and replace that does something like the following:
Identify all lines containing the string public function [gs]et.
On these lines, perform the following search and replace :s/_\(\w\)/\u\1/g
(
EDIT:
Suppose I have lines get_method_name() and set_method_name($variable_name) and I only want to change the case of the method name and not the variable name, how might I do that? The get_method_name() is more simple of course, but I'd like a solution that works for both in a single command. I've been able to use :%g/public function [gs]et/ . . . as per the solution listed below to solve for the get_method_name() case, but unfortunately not the set_method_name($variable_name) case.
If I've understood you correctly, I don't know why the things you've tried haven't worked but you can use g to perform a normal mode command on lines matchings a pattern.
Your example would be something like:
:%g/public function [gs]et/:s/_\(\w\)/\u\1/g
Update:
To match only the method names, we can use the fact that there will only be method names before the first $, as this looks to be PHP.
To do that, we can use a negative lookbehind, #<!:
:%g/public function [gs]et/:s/\(\$.\+\)\#<!_\(\w\)/\u\2/g
This will look behind #<! for any $ followed by any number of characters and only match _\(\w\) if no $s are found.
Bonus points(?):
To do this for multiple buffers stick a bufdo in front of the %g
You want to use a substitute with an expression (:h sub-replace-expression)
Match the complete string you want to process then pass that string to a second substitute command to actually change the string
:%s/\(get\|set\)\zs_\w\+/\=substitute(submatch(0), '_\([A-Za-z]\)', '\U\1', 'g')
Running the above on
get_method_name($variable_name)
set_method_name($variable_name)
returns
getMethodName($variable_name)
setMethodName($variable_name)
To have vi do replace sad with happy, on all lines, in a file:
:1, $ s/sad/happy/g
(It is the :1, $ before the sed command that instructs vi to execute the command on every line in the file.)
Two of my favorite Vim features are the ability to apply standard operators to lines matching a regex, and the ability to filter a selection or range of lines through an external command. But can these two ideas be combined?
For example, I have a text file that I use as a lab notebook, with notes from different dates separated by a line of dashes. I can do something like delete all the dash-lines with something like :% g/^-/d. But let's say I wanted to resize all the actual text lines, without touching those dash lines.
For a single paragraph, this would be something like {!}fmt. But how can this be applied to all the non-dash paragraphs? When I try what seems the logical thing, and just chain these two together with :% v/^-/!fmt, that doesn't work. (In fact, it seems to crash Vim...)
Is there a way to connect these two ideas, and only pass lines (not) matching a pattern into an external command like fmt?
Consider how the :global command works.
:global (and :v) make two passes through the buffer,
first marking each line that matches,
then executing the given command on the marked lines.
Thus if you can come up with a command – be it an Ex command or a command-line tool – and an associated range that can be applied to each matching line (and range), you have a winner.
For example, assuming that your text is soft-wrapped and your paragraphs are simply lines that don't begin with minus, here's how to reformat the paragraphs:
:v/^-/.!fmt -72
Here we used the range . "current line" and thus filtered every matching line through fmt. More complicated ranges work, too. For instance, if your text were hard-wrapped and paragraphs were defined as "from a line beginning with minus, up until the next blank line" you could instead use this:
:g/^-/.,'}!fmt -72
Help topics:
:h multi-repeat
:h :range!
:h :range
One way to do it may be applying the command to the lines matching the pattern 'not containing only dashes'
The solution I would try the is something like (not tested):
:g/\v^(-+)#!/normal V!fmt
EDIT I was doing some experiments and I think a recurvie macro should work for you
first of all set nowrapscan:
set nowrapscan
To prevent the recursive macro executing more than you want.
Then you make a search:
/\v^(-+)#!
Test if pressing n and p works with your pattern and tune it up if needed
After that, start recording the macro
qqn:.!awk '{print $2}'^M$
In this case I use awk as an example .! means filter current line with an external program
Then to make the macro recursive just append the string '#q' to the register #q
let #q .= '#q'
And move to the beggining of the buffer to apply the recursive macro and make the modifications:
gg#q
Then you are done. Hope this helps
Given the following file path:
/Users/Lawrence/MyProject/some/very/interesting/Code.scala
I would like to generate the following using a single regex replace (the root can be a constant):
some.very.interesting
This is for the purpose of generating a snippet for Sublime Text which can automatically insert the correct package/namespace header for my scala/java classes :)
Sublime Text uses the following syntax for their regex replace patterns (aka 'substitutions'):
{input/regex/replace/flags}
Hence why an iterative approach cannot be taken - it has to be done in one pass! Also, substitutions cannot be nested :(
If you know the maximum number of nested folders.You can specify that in your regex.
For 1 to 3 nested folders
Regex:/Users/Lawrence/MyProject/(\w+)/?(\w+)?/?(\w+)?/[^/]+$
Replace:$1.$2.$3
For 1 to 5 nested folders
Regex:/Users/Lawrence/MyProject/(\w+)/?(\w+)?/?(\w+)?/?(\w+)?/?(\w+)?/[^/]+$
Replace:$1.$2.$3.$4.$5
Given the constraints this is only thing you can do
Input
/Users/Lawrence/MyProject/some/very/interesting/Code.scala
Regex
^/Users/Lawrence/MyProject/[^/]+/[^/]+/[^/]+/Code.scala
or
^/[^/]+/[^/]+/[^/]+/([^/]+)/([^/]+)/([^/]+)/
Replace
\1.\2.\3
Update
This gets you closer, but not exactly it:
Regex
(^/Users/Lawrence/MyProject/|/Code\.scala$|/)
Replacement
.
Output would be:
.some.very.interesting.
Without multiple replacements in a single line and without recursive back references it's going to be hard.
You might have to do a second replacement, replacing something like this with an empty string (if you can):
(^\.|\.$)