Based on the gdb/mi documentation at https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Support-Commands.html, I've run this
$ gdb --quiet -i=mi $(readlink -f $(which ls))
=thread-group-added,id="i1"
=cmd-param-changed,param="pagination",value="off"
=cmd-param-changed,param="confirm",value="off"
~"Reading symbols from /nix/store/6m648r8w4qhqv8c33n09blp389bsvvx4-coreutils-8.25/bin/ls..."
~"(no debugging symbols found)...done.\n"
(gdb)
-list-target-features
^done,features=[]
How can I find out why async is not in the list of target features? Given that emacs tries to use the async functionality by default in its gdb integration, I would expect this feature to be pretty standard.
I'm on gdb version 7.11.1.
-list-target-features is a bit funny. In order to see async there, you must do two things:
Before starting the inferior, -gdb-set mi-async on. (There's also a deprecated alias for compatibility with older versions; see the manual.)
Only check -list-target-features after the inferior has started.
With these I get:
-list-target-features
^done,features=["async"]
This all seems obscure to the point of not being useful; but I think it was done this way for compatibility when async was made the default internally.
Related
I'd like to define a command which does X under gdb-multiarch, but prints out a helpful message when run under normal gdb. How can my script determine which of the two its run under?
Why? When I start gdb-multiarch, I can bind to a qemu-arm session. When I try that in gdb, I get bizarre errors. It's easy to forget and run gdb (and not -multiarch), and I want to my bind-to-qemu tell me "This must be run under gdb-multiarch".
Your question presumes that there is some difference between gdb and gdb-multiarch, but there doesn't have be any such difference.
Presumably on the OS you are using the gdb and gdb-multiarch are configured differently, with gdb only supporting native architecture, while gdb-multiarch supports cross-architecture debugging.
Presumably what you actually want to detect is that the target-architecture you need (arm ?) is / isn't supported by the current binary.
In the bind-to-qemu user-defined function, you can try to set architecture arm.
If that errors out, the rest of bind-to-qemu should not execute.
I heavily used gdb before, and now give lldb a shot. I like gdb's start command very much, but I can't find the equivalent one from lldb's manual. Now I can only use "b main" followed by run compound instead. So just curious whether there is an equivalent one in lldb? Or I can only use the compound of "b main" and run commands as a work-around.
You are correct, lldb doesn't have a dedicated start command. The stated motivation for that command is that gdb supports lots of runtimes that don't use a "main" symbol. That makes determining where user code begins non-trivial, and it's useful to have a command that figures that out for you. We haven't had a need for that in lldb yet.
If you always use start to run programs in gdb, then you can just set a breakpoint on main in your ~/.lldbinit file. That will get copied to any new targets that get made in your lldb session, and run will behave exactly like start (for runtimes that use a main symbol).
If it's something you would use a lot but not always, you could make your own version fairly easily using the python extension point in the command interpreter:
https://lldb.llvm.org/use/python-reference.html#create-a-new-lldb-command-using-a-python-function
Also, feel free to file an Enhancement Request with http://bugs.llvm.org.
I have an OCaml program that worked fine on Ubuntu 16 but when recompiled and run on Ubuntu 20 I get the following error:-
$ ocamldebug ./linearizer
OCaml Debugger version 4.08.1
(ocd) r
Loading program... done.
Time: 89534
Program end.
Uncaught exception: Sys_error "Illegal seek"
(ocd) b
Time: 89533 - pc: 624888 - module Netaccel_link
No source file for Netaccel_link.
I thought this was due to missing dev libraries but:-
$ sudo apt install libocamlnet-ocaml-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libocamlnet-ocaml-dev is already the newest version (4.1.6-1build6).
0 upgraded, 0 newly installed, 0 to remove and 20 not upgraded.
What setup step am I missing on Ubuntu 20?
This looks like a regression bug in libocamlnet and you should report an issue there or, I am a bit pessimistic that you will get any response, you can try to debug the issue yourself.
The problem that you are facing has nothing to do with missing libraries (they will be reported during installation or, if the package is broken, end up in linker errors). It may result, however, from some misconfiguration of the system. If that is true, then you're lucky as you can fix it yourself.
I will give you some advice that might help you in debugging this issue. For more, please try using discuss.ocaml.org as a more suitable media (SO doesn't favor this kind of a discussion and we might get deleted by admins).
The illegal seek exception is thrown when the seek operation is applied on a non-regular file, aka ESPIPE Unix error. So check your inputs. It could be that what was previously regarded as a file in Ubuntu is now a pipe or a socket.
Try to use ltrace or strace to pinpoint the culprit e.g.,
ltrace ./linearizer
or, if it overwhelms you, try strace
strace ./linearizer
Instead of using ocamldebug you can use plain gdb. You can use gdb's interfaces to provide the path to the source code (though most likely it won't work since ocamlnet is not compiled with debug information). I believe that it will give you a more meaningful backtrace.
Instead of using the system installation try using opam. Install your dependencies with opam and try older versions as well as newer versions of the OCaml compiler. Also, try different versions of ocamlnet. Ideally, try to reproduce the environment that used to work for you.
When nothing else works, you can use objdump -d and look at the disassembly of your binary. OCaml is using a pretty readable and intuitive name mangling scheme (<module_name>__<function_name>_<uid>), so you can easily find the source code (search for <module_name>.ml file and look for the <function_name> there)
Finally, just use docker or any other container to run your application. Consider switching from ocamlnet to something more modern and supported.
I'm working on RHEL WS 4.5.
I've obtained the glibc source rpm matching this system, opened it to get its contents using rpm2cpio.
Working in that tree, I've created a patch to mtrace.c (i want to add more stack backtrace levels) and incorporated it in the spec file and created a new set of RPMs including the debuginfo rpms.
I installed all of these on a test vm (created from the same RH base image) and can confirm that my changes are included.
But with more complex executions, I crash in mtrace.c ... but gdb can't find the debug information so I don't get line number info and I can't actually debug the failure.
Based on dates, I think I can confirm that the debug information is installed on the test system in /usr/src/debug/glibc-2.3.6/
I tried
sharedlibrary libc*
in gdb and it tells me the symbols are already loaded.
My test includes a locally built python and full symbols are found for python.
My sense is that perhaps glibc isn't being built under rpmbuild with debug enabled. I've reviewed the glibc.spec file and even built with
_enable_debug_packages
defined as 1 which looked like it might influence the result. My review of the configure scripts invoked during the rpmbuild build step didn't give me any hints.
Hmmmm .. just found /usr/lib/debug/lib/libc-2.3.4.so.debug
and /usr/lib/debug/lib/tls/i486/libc-2.3.4.so.debug
but both of these are reported as stripped by the file command.
It appears that you are installing non-matching RPMs:
/usr/src/debug/glibc-2.3.6
just found /usr/lib/debug/lib/libc-2.3.4.so.debug
There are not for the same version; there is no way they came from the same -debuginfo RPM.
both of these are reported as stripped by the file command.
These should not show as stripped. Either they were not built correctly, or your strip is busted.
Also note that you don't actually have to get all of this working to debug your problem. In the RPMBUILD directory, you should be able to find the glibc build directory, with full-debug libc.so.6. Just copy that library into your VM, and you wouldn't have to worry about the debuginfo RPM.
Try verifying that debug info for mtrace.c is indeed present. First see if the separate debug info for GLIBC knows about a compilation unit called mtrace.c:
$ eu-readelf -w /usr/lib/debug/lib64/libc-2.15.so.debug > t
$ grep mtrace t
name (strp) "mtrace.c"
name (strp) "mtrace"
1 0 0 0 mtrace.c
[10480] "mtrace.c"
[104bb] "mtrace"
[5052] symbol: mtrace, CUs: 446
Then see if GDB actually finds the source file from the glibc-debuginfo RPM:
(gdb) set pagination off
(gdb) start # pause your test program right after main()
(gdb) set logging on
Copying output to gdb.txt.
(gdb) info sources
Quit GDB then grep for mtrace in gdb.txt and you should find something like /usr/src/debug/glibc-2.15-a316c1f/malloc/mtrace.c
This works with GDB 7.4. I'm not sure the GDB version shipped with RHEL 4.5 supports all the command used above. Building upstream GDB from source is in fact easier than Python though.
When trying to add strack traces to mtrace, make sure you don't call malloc() directly or indirectly in the GLIBC malloc hooks.
I'm using Linux redhat 3, can someone explain how is that possible that i am able to analyze
with gdb , a core dump generated in Linux redhat 5 ?
not that i complaint :) but i need to be sure this will always work... ?
EDIT: the shared libraries are the same version, so no worries about that, they are placed in a shaerd storage so it can be accessed from both linux 5 and linux 3.
thanks.
You can try following commands of GDB to open a core file
gdb
(gdb) exec-file <executable address>
(gdb) set solib-absolute-prefix <path to shared library>
(gdb) core-file <path to core file>
The reason why you can't rely on it is because every process used libc or system shared library,which will definitely has changes from Red hat 3 to red hat 5.So all the instruction address and number of instruction in native function will be diff,and there where debugger gets goofed up,and possibly can show you wrong data to analyze. So its always good to analyze the core on the same platform or if you can copy all the required shared library to other machine and set the path through set solib-absolute-prefix.
In my experience analysing core file, generated on other system, do not work, because standard library (and other libraries your program probably use) typically will be different, so addresses of the functions are different, so you cannot even get a sensible backtrace.
Don't do it, because even if it works sometimes, you cannot rely on it.
You can always run gdb -c /path/to/corefile /path/to/program_that_crashed. However, if program_that_crashed has no debug infos (i.e. was not compiled and linked with the -g gcc/ld flag) the coredump is not that useful unless you're a hard-core debugging expert ;-)
Note that the generation of corefiles can be disabled (and it's very likely that it is disabled by default on most distros). See man ulimit. Call ulimit -c to see the limit of core files, "0" means disabled. Try ulimit -c unlimited in this case. If a size limit is imposed the coredump will not exceed the limit size, thus maybe cutting off valuable information.
Also, the path where a coredump is generated depends on /proc/sys/kernel/core_pattern. Use cat /proc/sys/kernel/core_pattern to query the current pattern. It's actually a path, and if it doesn't start with / then the file will be generated in the current working directory of the process. And if cat /proc/sys/kernel/core_uses_pid returns "1" then the coredump will have the file PID of the crashed process as file extension. You can also set both value, e.g. echo -n /tmp/core > /proc/sys/kernel/core_pattern will force all coredumps to be generated in /tmp.
I understand the question as:
how is it possible that I am able to
analyse a core that was produced under
one version of an OS under another
version of that OS?
Just because you are lucky (even that is questionable). There are a lot of things that can go wrong by trying to do so:
the tool chains gcc, gdb etc will
be of different versions
the shared libraries will be of
different versions
so no, you shouldn't rely on that.
You have asked similar question and accepted an answer, ofcourse by yourself here : Analyzing core file of shared object
Once you load the core file you can get the stack trace and get the last function call and check the code for the reason of crash.
There is a small tutorial here to get started with.
EDIT:
Assuming you want to know how to analyse core file using gdb on linux as your question is little unclear.