I've a big issue since last week, and I can't find any working solution.
When I compile Qwt 6.1.2 (and try next with 6.1.3) on a Windows 7 32bits with mingw32 console, and after compiling sequence, i have the following message:
usr/bin/sh: C:\Qt\Qt5.6.0\5.6\mingw49_32\bin\moc.exe : command not found
I try to change \ with / in makefile.release/ makefile.debug and it still doesn't work.
I hope someone have a solution for that.
PS: I build Qwt with an other PC with Windows 10 and work normally.
What helped was checking the Windows Path settings and removing all paths that would include a sh.exe binary (in my case Cygwin and Git for Windows). You could also change your Qt console path settings locally. Seems like qmake is generating Makefiles based on if 'sh' was found on the system or not.
Related
I have never used qt before, but I got a task to build an already existing application for Windows and Mac using the newest version of qt. What I have done so far is:
Installed Visual Studio Professional 2017.
Installed the latest Qt 5 Open Source.
Note: when installing the QT 5 I installed all of the components under QT/ QT 5.10.1 which were: qt 5.10.1 components and under QT/Tools I installed QT Creator 4.6.0 CDB Debugger Support and MinGW 5.3.0 : qt 5 Tools
I cloned the branch from GitHub that I wanted to build to C:/Projects
Then in Git Bash I cd to the project and tried to run qmake. The first time I had this problem:
"bash: qmake: command not found"
After searching into the problem I found out that I haven't added "Qt/5.10.1/msvc2017_64/bin" to PATH and I added it. Now when I echo $PATH I can see the directory added.
Now after bash recognises qmake and I try to run it it says:
Project ERROR: Cannot run target compiler 'cl'. Output:
===================
Maybe you forgot to setup the environment?
I have no idea how to fix the problem due to the fact that I have never used QT to build anything before. Can you help me?
In the read me file for the application I am trying to build it says:
Step-by-step instructions
1. Clone this branch
2. cd into the project
3. Run qmake - this wil generate Makefiles for all of the project's modules
4.Run make (Use the -j4 of -j flags - this greatly speeds up the build process - see the manual page for make for more info). You can also use the -s flag to silence the output - this also wins you a few seconds.
I am a bit puzzled by the instructions, it does not say to run qmake -project anywhere, but there is a qt project file in the directory that I cd to. Does this mean that I don't have to run qmake -project?
Also I have no idea how to run make by using the -j4 and -j flags and how to run flags in general. Could someone help me?
I believe that for the Cannot Run Compiler 'cl' issue I have some kind of a problem with the set up. Did I install too many components or is it to do with the VS setup?
I highly recommend you to install Qt from the Qt installer, and to use Qt Creator.
However, if you want to use it from source, you first need to get a compiler (ex: MinGW). Then you need to execute the instructions, but you need to use a MinGW (or whatever compiler you use) command prompt, which will automatically set the environment variables needed.
Note that this is Windows specific. On mac and linux, the compiler's environment variables are already set in the default command prompt (if there is a compiler, obviously).
I've successfully installed NetBeans 8.2 on my system. I've also installed MinGW and MSYS to make it compile C/C++ projects and it works flawlessly. The problem is that whenever I try to debug a program it gives me two errors:
Selected console type is not supported in your configuration, using
External terminal instead
and
GDB has unexpectedly stopped with return -1.073.741.701
and GDB is stuck loading until i press Cancel.
I noticed that if I go to C:\MinGW\bin\gdb.exe it says that the application cannot be started (Error code: 0xc00007b).
Maybe that's because I followed the official tutorial for installing MinGW and MSYS, but I wasn't able to install GDB correctly because point 15 says:
Unzip the gdb-7.0-2-mingw32-bin.tar.gz to your C:\MinGW directory so
that the gdb executable is installed into your C:\MinGW\bin directory.
but if I unzip the files, there are bin and share directories (which overlap with the existing ones), so I chose to cancel.
I could have found the issue, but I'm not sure. I ran Dependency Walker on gdb.exe and it reds out ZLIB1.DLL and KERNEL32.DLL. Do I need the 32-bit version of them? If so, where can I find the downloads?
Screenshot:
Not unzipping the files is almost definitely the problem. There is probably a dependency that doesn't, causing a runtime error.
Problem solved: as I mentioned in my edit, the problem was the 64-bit version of ZLIB1.dll, so I downloaded the 32-bit version and put it inside C:\MinGW\bin. Now everything works perfectly. Thanks to #bremen_matt for suggesting me that it was a dependency issue.
Because I am not a Java enthusiast, I decided to use C++ and Qt for one of my projects. However, I came across the big cross-compiling Qt problem, and I am unable to produce an .exe file for Windows users.
My setup
Linux Ubuntu 12.04, with Wine and Qt. qmake -v gives the following output :
QMake version 2.01a
Using Qt version 4.8.1 in /usr/lib/x86_64-linux-gnu
I also have a MinGW32 compiler, which can be found at /usr/bin/i586-mingw32msvc-g++. My Wine drive_c folder contains the following Qt directories :
$HOME/.wine/drive_c/Qt/Qt5.2.0/5.2.0/Src
$HOME/.wine/drive_c/Qt/Qt5.2.0/5.2.0/mingw48_32
The mingw48_32 directory contains the necessary include/ and lib/ directories, which are used in my mkspec file, /usr/share/qt4/mkspecs/win32-x-g++/qmake.conf :
QMAKE_INCDIR_QT = /home/me/.wine/drive_c/Qt/Qt5.2.0/5.2.0/mingw48_32/include
QMAKE_LIBDIR_QT = /home/me/.wine/drive_c/Qt/Qt5.2.0/5.2.0/mingw48_32/lib
The problem
According to most guides I've found about Qt cross-compiling, my setup should be enough to run a simple :
qmake -spec win32-x-g++
make
wine /path/to/my/application.exe
But... nothing's linked. QApplication and every other symbol I use in my program are "not found". No QApplication, no QPushButton, no connect(), no SIGNAL(), no SLOT()...
My objective here is to successfully configure QtCreator to use this setup (in an independent build configuration), so that it can build a Linux executable (through the first and working configuration), and a Win32 .exe (through the MinGW setup above). However, I cannot modify a single build step in QtCreator :
Cannot add a "MinGW" toolchain : it is not available in the "Add" dropdown list.
Cannot change the -spec parameter value in the project build configurations panel. The field is non-editable.
Despite guides and solutions I found all over the Internet, my only solution so far is to send my source code to a virtual Windows machine, and have it create a new project with it. On this VM, I could probably compile for Windows... But of course, this doesn't actually sound like a real "solution" to me...
Is there any way Qt(Creator) has finally made cross-compiling easier now ? I'm getting a bit tired of "symbol not found" errors...
First,
sudo apt-get install mingw-w64
Then, check if Qt Creator finds the toolchain.
Next, until Ubuntu starts providing a mingw-w64-qt package, download the Qt source and build it. This is bound to get messy, and maybe even the simplest thing to do is to install WINE and use a Windows Qt version.
I just started using Qt Creator for creating C++ GUI programs. I just downloaded it and installed it, but the compiling process is throwing me errors. When I try to compile my project (very simple, just a QLabel on the screen...it's my first project) it comes up with the error:
qtcreator_ctrlc_stub: Command line failed:
C:\Users\andrew\Dropbox\Programming\C++\build-
FirstGUIApp-Desktop_Qt_5_1_1_MSVC2012_32bit-Debug\Makefile 10:04:35:
The process
"C:\Users\andrew\Dropbox\Programming\C++\build-FirstGUIApp-Desktop_Qt_5_1_1_MSVC2012_32bit-Debug\Makefile"
exited with code -1. Error while building/deploying project
FirstGUIApp (kit: Desktop Qt 5.1.1 MSVC2012 32bit) When executing step
'Make'
I hunted around for an answer here and here and a couple other places but I'm just confused about the whole thing. I have a couple of ideas of my own but I don't know how to try my ideas. Here are some of my ideas:
1) MinGW isn't in the path or isn't installed
But, if it isn't in the path, how do I put it in? Where is it? I have Code Blocks installed which has MinGW installed, so could I maybe use it from there?
2) the make file is messed up somehow
Again, what could be wrong and how could I fix it?
3) Qt Creator isn't installed correctly.
Obviously, re-install it, but I want to make sure all other options are tried before, because it took me a very long time to download.
I apologize if I'm sounding noobish or it's a stupid question, but I really am confused with all of this. Please be patient with me and try to explain things well and thoroughly. I'm using Windows 8.1 and downloaded the offline installer. Thanks in advance.
UPDATE
Here is a screenshot of my Qt, how can I tell if it is the visual studio or minGW version?
UPDATE
Here is my MinGW Folder in CodeBlocks. Is this the folder with the compiler or is it something else?
For your ideas:
1: if you downloaded from qtproject with binary. then qt and qt creator should be installed under the C:\Qt\Qt5.1.1 then corresponding minGW should be stay in C:\Qt\Qt5.1.1\Tools\mingw48_32\bin\gcc.exe
this is the directory you need. Remember, QtCreator needs two tools to make sure your project and compile and run, qmake and compiler.
Qmake is tool help you translate .pro file into makefile,
compiler (gcc) minGW use gcc to run the makefile, compile your code to binary.
where to figure out tools you are using are correct?
---> qtcreator --> Tools -> Build&Run -> Kits
in here You should be able find different kits, of course you maybe have only one.
Select one, Double check the Qt Version and Compiler is the one you wish to use.
click Manage next to compiler, Every compiler in the Auto-detect should be ok to use.
If you don't see anyone, add one, click Add, MinGW, put C:\Qt\Qt5.1.1\Tools\mingw48_32\bin\gcc.exe like into path. ABI should auto-set depends on your environment.
Answer to your second question, what's wrong with your makefile, no one knows, you should check your .pro, usually makefile are generated by qmake xx.pro. Double check your .pro file and re-run qmake will solve the problem.
in tools->options->build&run check if minGW is actually there in the compiler and kit list
in the project tab (on the left hand side) you can set the environment for the build click the PATH value and add the path to minGW to it (you may need to add a lib and include var so the standard library gets added)
re run qmake from the build menu
double check you have the correct version it looks like you have the visual studio Qt not the minGW version,
Terminal:(in Linux)
sudo apt-get install build-essential cmake libqt4-dev
i'm sorry i dont know why this code works,but i have the same problem in linux and this code worked.
I am currently trying to set my eclipse so that I can start c++ development on my Windows computer. However, I am stuck with some errors. But first, here is what I did so far:
Installed the CDT for Eclipse
Installed Cygwin (with the additional packages gcc, gcc and make)
Added all "paths for headers" in Eclipse
The problem is that when I try to run my Hello World program, I get Launch failed. Binary not found.
I already build and rebuild the project but the program is still not running. It must be because of these errors that I have:
/bin/sh: g++: command not found
make: ***[src/HelloWorld.o] Error 127
What can I do to solve these errors?
Try running the Cygwin setup.exe again and select the packages for g++. Search for that and make sure those are installed. It should be under the name gcc-g++. The C++ compiler is installed separately from the C compiler.
Ok, I figured it out by myself. Since this really freaked me out, I want anyone else who has this problem to know how I solved it.
So apparently, since I had g++, gcc and all that installed, it had to be a problem with the path.
So what I did was check my path. If you don't know how to edit it, check this link http://www.computerhope.com/issues/ch000549.htm
So in there, I chose Path under the System variables and clicked on Edit.... What I noticed was that instead of C:\cygwin64 it said C:\cygwin. All I did was append the 64 (since I had installed the 64-bit version of cygwin) and I was done.
I restarted Eclipse, cleaned and built the project and the errors where gone!