I've successfully installed NetBeans 8.2 on my system. I've also installed MinGW and MSYS to make it compile C/C++ projects and it works flawlessly. The problem is that whenever I try to debug a program it gives me two errors:
Selected console type is not supported in your configuration, using
External terminal instead
and
GDB has unexpectedly stopped with return -1.073.741.701
and GDB is stuck loading until i press Cancel.
I noticed that if I go to C:\MinGW\bin\gdb.exe it says that the application cannot be started (Error code: 0xc00007b).
Maybe that's because I followed the official tutorial for installing MinGW and MSYS, but I wasn't able to install GDB correctly because point 15 says:
Unzip the gdb-7.0-2-mingw32-bin.tar.gz to your C:\MinGW directory so
that the gdb executable is installed into your C:\MinGW\bin directory.
but if I unzip the files, there are bin and share directories (which overlap with the existing ones), so I chose to cancel.
I could have found the issue, but I'm not sure. I ran Dependency Walker on gdb.exe and it reds out ZLIB1.DLL and KERNEL32.DLL. Do I need the 32-bit version of them? If so, where can I find the downloads?
Screenshot:
Not unzipping the files is almost definitely the problem. There is probably a dependency that doesn't, causing a runtime error.
Problem solved: as I mentioned in my edit, the problem was the 64-bit version of ZLIB1.dll, so I downloaded the 32-bit version and put it inside C:\MinGW\bin. Now everything works perfectly. Thanks to #bremen_matt for suggesting me that it was a dependency issue.
Related
As title,
Build successful, but the exe can't run. can not found msvcr100.dll.
I can put msvcr100.dll with exe in the same dir, the exe can run.
But I just want only one exe file.
Anyone know how to do?
Has solved. This is a bug of pyinstaller3.2, the new in the git has solved this bug. Down the newest source in the github, erverything works fine.
Has solved. This is a bug of pyinstaller3.2, the new one in the git has solved this bug. Down the newest source in the GitHub, everything works fine.
This is correct, I cant tell you how much that answer helped me out. I have been trying to build a single exe Exploit to execute on Windows XP with-out it crashing for my OSCP Labs/Exam. I followed so many tutorials and nothing seems to work. I was able to build the EXE but could not get it to run under a single EXE.
If anyone who reads this is getting "This Program cannot be run in DOS mode" try running it from another machine with the same build (Windows XP). There is not much info out there on how to solve that from a Reverse Shell on a End Of Life Operating System using an EXE exploit built with Pyinstaller. (Lots of Trial and Error and determination)
Microsoft Visual C++ 2008 Redistributable Package (or some other version depending on python version) is needed in any case, python27.dll requires it
I was also receiving an error about msvcr100.dll when ran from the GUI on my build machine(WinXP SP2). This is corrected in the 3.3 Dev version on GitHub.
I installed the C++ 2008 Package but this didn't solve my problem when I re-built the EXE, the 3.3 Dev Pyinstaller was the solution.
What I did was:
Zip down the Dev version of Pyinstaller 3.3 Dev(GitHub) is the newest for 11/14/16 that I could tell. Make sure you have Python 2.7.x (I used 2.7.11) and pywin32 installed that matches (Python 2.7.x) version. (And it does matter if its 64-bit or 32-bit) Use the setup.py to install Pyinstaller, make sure you do not have a previous version already installed, if so use pip or etc. to remove. I installed with pip first and this was my whole issue.
I was able to get all of my 32-bit Single EXE Exploits to run on 64-bit/32-bit Windows machines up to Windows 10.
Once that is completed, make sure Pyinstaller is in your $PATH and follow the standard tutorials on creating a --onefile EXE. Copy to your Windows Target machine and it should work with-out error. I did not need to pull any dependencies over but you may have to include some with the --hidden command. Its greatly detailed in the Pyinstaller documentation on how to include hidden .dlls
If this still doesn't work for you try using py2exe. Its a little more complicated but it your determined you will figure it out.
If you have code written in python 2.x.x and 3.x.x you can have multiple environments of Python and have Pyinstaller installed in each. This is in the documentation as well.
Thank you jim ying. Your 2 sentence answer was exactly what I needed.
I have just started to learn C++ for school, and I'm trying to download the compiler MinGW to compile my source code. However, every time I try to compile a program an error message shows up saying that zlib1.dll is missing.
This is the error message
the program can't start because zlib1.dll is missing from your computer
I have tried installing/re-installing with no luck. I don't know what's the problem here?
Can anyone please help me with this problem as I have some homework that I need to do but I can't without the compiler.
Thanks.
I had this same problem, but fixed it like this:
I ran the MinGW Installation Manager (e.g. C:\MinGW\libexec\mingw-get\guimain.exe).
I navigated to All Packages -> MinGW -> MinGW Libraries.
I checked the boxes next to mingw32-libz (dev & dll).
I went to Installation -> Apply Changes.
Now everything worked properly.
From the MinGW getting started; an automated GUI installer assistant, or use mingw-get, is available (installed as "MinGW Installation Manager") and can be used to install additional libraries and manage dependencies. For the missing zlib libraries, add the mingw32-libz libraries as required.
It seems to have been an issue previously here on super user. It seems you may be able to get them directly from the zlib website. Open Babel has some info on it being required to be copied afterwards (together with some other dlls).
Alternatives include using the mingw-w64 distros from nuwen or mingw-builds. I've never had any issue getting these up and going. They also support x64 builds.
Had same problem here, I've just used mingw-get install mingw32-libzat the cmd and it worked.
I am currently trying to set my eclipse so that I can start c++ development on my Windows computer. However, I am stuck with some errors. But first, here is what I did so far:
Installed the CDT for Eclipse
Installed Cygwin (with the additional packages gcc, gcc and make)
Added all "paths for headers" in Eclipse
The problem is that when I try to run my Hello World program, I get Launch failed. Binary not found.
I already build and rebuild the project but the program is still not running. It must be because of these errors that I have:
/bin/sh: g++: command not found
make: ***[src/HelloWorld.o] Error 127
What can I do to solve these errors?
Try running the Cygwin setup.exe again and select the packages for g++. Search for that and make sure those are installed. It should be under the name gcc-g++. The C++ compiler is installed separately from the C compiler.
Ok, I figured it out by myself. Since this really freaked me out, I want anyone else who has this problem to know how I solved it.
So apparently, since I had g++, gcc and all that installed, it had to be a problem with the path.
So what I did was check my path. If you don't know how to edit it, check this link http://www.computerhope.com/issues/ch000549.htm
So in there, I chose Path under the System variables and clicked on Edit.... What I noticed was that instead of C:\cygwin64 it said C:\cygwin. All I did was append the 64 (since I had installed the 64-bit version of cygwin) and I was done.
I restarted Eclipse, cleaned and built the project and the errors where gone!
I've spent hours looking up how to fix this problem but nothing has worked. I have eclipse Indigo with CDT and ive downloaded cygwin and packages such as g++, make file, etc. When I try to execute any code I end up with the error Launch failed. Binary not found. I've also set the system path C:\cygwin\bin. How can I set up eclipse so I can use it as my IDE for c++?
Found the problem, I didn't press the hammer button to build the project first. I've only used eclipse for java and I could just hit run and everything would work fine.
Try downloading MinGW, and using those compilers. The Cygwin tools require libraries that Eclipse may not load. The MinGW executables do not require any additional environment like Cygwin does.
Also, in order to use most Cygwin executables, you need to launch the Cygwin environment first.
I've gone to http://sourceforge.net/project/showfiles.php?group_id=2435, downloaded the Automated MinGW Installer for MinGW 5.1.4 and at the same time the GNU Source-Level Debugger Release Candidate: GDB 6.8-3. I've then installed MinGW base tools into C:\MinGW. No problem so far.
However when I come to install the gdb debugger it has a lot of files and folders with the same names as some already installed but the files are different to those already installed. e.g C:\MinGW\include\bfd.h is 171 KB but gdb-6.8-mingw-3\include\bfd.h is 184 KB.
How do I add gdb to MinGW without breaking what's already installed?
In a command prompt I browsed to C:\MinGW\bin and ran:
mingw-get.exe install gdb
That fixed it for me. Not sure if it matters but I have C:\MinGW\bin in my path (guess I probably didn't need to browse to C:\MinGW\bin).
The Current Release (5.2.1) version of gdb at the project files page has always worked for me. The download is a stand-alone .exe, you don't need anything else.
But I'll bet the .exe in the 6.8 package will work, too. I'd try using just the .exe, and then if there are problems, try extracting the other files from the 6.8 package. (Though that may cause problems with the rest of the MinGW installation.)
Update: There seems to be a 7.something version. I haven't tested it thoroughly, but it seems to work, even with gcc 3.
Get Wascana Desktop Developer. It combines MinGW, gcc, Eclipse and gdb in one package.
You can safely overwrite the files prepackaged with MinGW with the (newer) ones from the gdb tarball. You can also choose not to overwrite them - just make sure to pick either one set, i.e. avoid mixing files from the older and the newer package.
Most of the offending files are probably not really relevant to you anyway. For example, the files belonging to the libbfd library aren't required for gdb's day to day operation, they're used if you want to extend the debugger or write debugging tools yourself.
At any rate, make a backup of the mingw directory before untarring the new release. It's very easy since MinGW is self-contained in that directory. That way, if anything should malfunction, you can just delete the directory and restore from the backup.
Usually for installing gdb in windows, You have to 2 ways to install:
1) use ready-made binaries that were build and compiled from GNU gdb by some provider (easy to install)
use TDM-GCC binaries provided from the following URL and that is including inturn the gcc complier and also gdb debugger.
http://tdm-gcc.tdragon.net/
use Equation package inside which GNU GDB was already compiled and built.
http://www.equation.com/servlet/equation.cmd?fa=gdb
2) use minimal mingw or cygwin package then after install gdb inside it.
Install either mingw or cygwin inside which GDB is already shipped
Open cygwin or mingw terminal and just type the following to make sure it is already installed
$ gdb --version
Hint: if you did not find gdb installed, simply open the cygwin or mingw package installer and make sure you already check gdb
Hint: getting and installing a debug build of the OHRRPGCE is providing useful information about crashes.
From cygwin or mingw terminal, Start gdb using the following
c:\mingw\bin\gdb.exe program_to_debug.exe
REF: http://rpg.hamsterrepublic.com/ohrrpgce/GDB_on_Windows
The TDM GCC/MinGW32 builds installer includes gdb. It's gcc 4.4.x with all the core binary packages required for basic Windows development, and is widely used without any unusual problems.