Is it possible to call Comsol from Fortran?
I have found that it is possible to call Comsol from Matlab, and Matlab from Fortran. However, is it possible to skip Matlab?
I want to just use a simple 2D axisymmetric FEM solve.
Comsol was essentially a toolbox to matlab before, that’s where the support originates from.
You could use java to call your fortran code, and later comsol, and then back to fortran again. Starting point: http://www.csharp.com/javacfort.html
Alternative solution is to use the mex-interface to run fortran from matlab (fairly simple actually). Then call comsol with the comsolmatlab-connection, and so on.
Related
My goal is getting the spectrogram result like this article in C++. They have example matlab source code and I want to port them into C/C++. Here are 3 matlab functions:
Blurring function
PLCA
STFT
I tried to use Matlab Coder to generate C code and get result like this:PLCA C
There were many problems with this converted code: it depends on many lib and functions, there was some methods can't be ported, and I can't build it.
So I decide to port code by hand, and then I faced with other problems:
The data type in matlab is very flexible, for example, the array in matlab can add more columns at anytime, it can contain other array or vector, so it make confuse how to convert it into C++
There were some supported methods/operations in matlab and I don't know how to port it into C++. For example, circshift, zeros, divide two matrixes ...
Is there any suggestion?
I've no experience on matlab coder but we solve this type of problems by using simulink code generator. It may seem weird but works fine. We create a simulink project and add a matlab function block, copy-paste the function there and start code generation.
And of course matlab don't want to show us the key points of their algorithms thats why there are libraries in this method as well.
I am writing a simulation of some differential equation. My idea was the following:
1. Write the core simulation (moving forward in time, takes a lot of time) in C++
2. Do initialisation and the analysis of the results with a program
like Matlab/Scilab
The reason for (1) is that C++ is faster if implemented correctly.
The reason for (2) is that for me it is easier to make analysis, like plotting etc..., with a program like Matlab.
Is it possible to do it like this, how do I call C++ from Matlab?
Or do you have some suggestions to do it in a different way?
You could certainly do as you suggest. But I suggest instead that you start by developing your entire solution in Matlab and only then, if its performance is genuinely holding your work back, consider translating key elements into C++. This will optimise the use of your time, possibly at the cost of your computer's time. But a computer is a modern donkey without a humane society to intervene when you flog it to death.
As you suggest, well written C++ can be expected to be faster than interpreted Matlab. But ask yourself What is Matlab written in ? For much of its computationally-intensive core functionality Matlab calls libraries written in C++ (or whatever). Your task would be not to write code faster than interpreted Matlab, but faster than C++ (or whatever) written by specialists urged on by a huge market of installed software.
Yes, Matlab has a C/C++ API.
This API permits to:
Write C++ functions which can be invoked from Matlab
Read/Write data from a .mat file
Invoke the Matlab engine from C++
I am working to something similar to what you are trying to do, my approach is:
Import in C++ the input data from a .mat file
Run the simulation
Export the results back in a .mat file
The Matlab API is in C, and I suggest you to write a C++ wrapper for your convenience.
In order to work with Matlab mxArray, I suggest to take a look at the boost::multi_array library.
In particular you can initialize an object of type multi_array_ref from a Matlab mxArray like this:
boost::multi_array_ref<double,2> vec ( mxGetPr (p), boost::extents[10][10], boost::fortran_storage_order() );
This approach made the code much more readable.
You can call your own C, C++, or Fortran subroutines from the MATLAB command line as if they were built-in functions. These programs, called binary MEX-files, are dynamically-linked subroutines that the MATLAB interpreter loads and executes.
You should set compiler, look here Setting up mex to use the Visual Studio 2010 compiler.
All about MEX-files here: http://www.mathworks.com/help/matlab/matlab_external/using-mex-files-to-call-c-c-and-fortran-programs.html.
I have written some mex (c++) code, i have used mxArrays, and few other Matlab functions, i am wondering is it possible to convert it to C++ code easily by including the appropriate header and making some minor changes ?
edit:
By "convert", i mean that i want to compile and run my code without relying (using) on matlab.
As mentioned in the comments above, making this work depends greatly on the nature of the MATLAB functions you are using. Since you have successfully ported much of your MATLAB code to C++, I suggest you continue doing so until you are no longer reliant on the MATLAB libraries to build.
Are there any toolbox functions you are relying on? If so this may be a bigger task than you realize.
Good luck!
You can make executable by using SimulinkCoder - so you can run it without Matlab ... but you still must use Matlab to make executable every time you make change in the code.
Make basic Simulink model with single S-function block in which you specify your mex file.
Use SimulinkCoder (Real Time Workshop) to make executable out of the Simulink model.
I have an executable function that I compiled which takes an input and spits out some outputs when I run it in a terminal. The function is written in C++, and I know that its supposed to be much faster than matlab. But what if my matlab code is using this external function like it's own, would the fact that its externally called make it slower in any way?
I'm trying to debate if there is any point in me writing a matlab version of this function, when I could just execute it with system() in matlab.
It depends... You have to try it and test the performance.
A better approach would be to write your code as a MEX-function. This gives you the best of both worlds (think of MEX-files as DLL's): C code performance, with a lower overhead to call than an external process.
Since you already implemented your program in C\C++, you should be able to wrap as MEX-function with little effort..
I am working on an image processing project using Matlab. We should run our program (intended to be an application) on a cell phone.We were then asked to convert our code into C or C++ language so we get a feel of how long it would take for execution and then choose a platform. So far we didn't figure out how to do this conversion.. Any ideas of what to do to convert Matlab to C or C++??
The first thing you need to realise is that porting code from one language to another (especially languages as different as Matlab and C++) is generally non-trivial and time-consuming. You need to know both languages well, and you need to have similar facilities available in both. In the case of Matlab and C++, Matlab gives you a lot of stuff that you just won't have available in C++ without using libraries. So the first thing to do is identify which libraries you're going to need to use in C++. (You can write some of the stuff yourself, but you'll be there a long time if you write all of it yourself.)
If you're doing image processing, I highly recommend looking into something like ITK at http://www.itk.org -- I've written my image processing software twice in C++, once without ITK (coding everything myself) and once with, and the version that used ITK was finished faster, performed better and was ten times more fun to work on. FWIW.
Matlab can gererate C code for you.
See:
http://www.mathworks.com/products/featured/embeddedmatlab/
The generated code does however depend on matlab libraries. So you probably can't use it for a cell phone. But it might save you some time anyways.
I also used the MATLAB Coder to convert some functions consisting of a few hundred lines of MATLAB into C. This included using MATLAB's eigenvalue solver and matrix inversion functions.
Although Coder was able to produce C code (which theoretically was identical), it was very convoluted, bloated, impossible to decipher, and appeared to be extremely inefficient. It literally created about 10x as many lines of code as it should have needed. I ended up converting it all by hand so that I would actually be able to comprehend the C code later and make further changes/updates. This task however, can be very tedious/dangerous, as the array indexing in Matlab is 1-based and in C it's 0-based. You're likely to add bugs into the code, as I experienced. you'll also have to convert any vector/matrix arithmetic into loops that handle scalars (or use some type of C matrix algebra package)
The MathWorks provides a product called MATLAB Coder that claims to generate "readable and portable C and C++ code from MATLAB® code". I haven't tried it myself, so I can't comment on how well it accomplishes these goals.
With regard to the Image Processing Toolbox, this list (presumably for R2016b) shows which functions have been enabled for code generation and any limitations they may have.
Matlab has a tool called "Matlab Coder" which can convert your matlab file to C code or mex file. My code is relatively simple so it works fine. Speed up gain is about 10 times faster. This saves me time coding a few hundreds lines. Hope it's helpful for you too
Quick Start Guide for MATLAB Coder Confirmation
The links describe the process of converting your code in 3 major steps:
First you need to make a few simplifications in your present code so that it would be simple enough for the Coder to translate.
Second, you will use the tool to generate a mex file and test if everything is actually working.
Finally you would change some setting and generate the C code. In my case, the C code has about 700 lines including all the original matlab code (about 150 lines) as comments. I think it's quite readable and could be improve upon. However, I already get a 10 times speed up gain from the mex file anyway. So this is definitely a good thing.
We can't not be sure that this will work in all case but it's definitely worth trying.
I remember there is a tool to export m-files as c(++)-files. But I could never get that running. You need to add some obscure MATLAB-headers in the c/c++code, ... And I think it is also not recommended.
If you have running MATLAB-code, it shouldn't take too much effort to do the conversion "by hand". I have been working on several project where MATLAB was used and it was never consider to use any tools to convert the code to C/C++. It was always done "by hand".
I believe to have been the only one who ever investigate into using a tool.
Well there is not straight conversion from matlab to c/c++ You will need to understand the language and the differences between matlab and c/c++ and then start coding it in c/c++. Code a little test a little until it works.