When I am using jmeter it gives the message as "Account created successfully". So I added this message in Response assertion-->Response Message-->Contains.
But assertion is failed when giving the correct credential.When opening the assertion result, it shows the message as "/Account created successfully/".
Now how to remove the "/" from this message.
1.Please check that there is no extra space in your message
2. Make sure you are coping the message from text response only,Please look below snapshot for reference only
3. "/" is not a problem it will come before your message when assertion fail
Related
I'm having trouble to get the correct regex for filebeat when using tomcat and log4j.
For this log:
21/10/2022 16:04:37 ERROR en Clase: ExceptionLogger - MSN: test
Exception.Class: BUSINESS EXCEPTION
ErrorCode: 0
Usuario: test
StackTrace:
at ar.com.test.conf.Monitor.monitorTest(ImpBusCaja.java:1213)
at ar.com.test.delegators.Monitor.m(Cajas.java:595)
I've configured this pattern: '^[[:space:]]' with negate=false and match=after (as the documentation says) but it doesn't work.
Even if I use the go playground, it should work: https://go.dev/play/p/JGV8ZDPtHwt
Here's what we have for configuration for log4j-based files with a slightly different pattern, but you should be able to adapt it to your situation:
multiline.type: pattern
multiline.pattern: '^\d{4}-\d{2}-'
multiline.negate: true
multiline.match: after
Here's an example standard log4j log line:
2022-10-22 13:55:34,932 [pool-8-thread-1] TRACE fully.qualified.class.Name- Here's the raw message
Here's an example exception message:
2022-10-21 20:14:42,442 [catalina-exec-6] ERROR fully.qualified.class.Name- Main error message
fully.qualified.exception.Type: Exception error message
at stack.trace.class.method(Source.java:103)
at stack.trace.class.method(Source.java:203)
at stack.trace.class.method(Source.java:303)
at stack.trace.class.method(Source.java:403)
So we are just looking for log lines starting with dddd-dd- and assuming that those are always "new log entries". We could certainly confuse things with a log line that was a continuation of something previous which started with that same pattern, but that's very rare.
I have uploaded a CSV file with 300K rows from GCS to BigQuery, and received the following error:
Where can I find the error stream?
I've changed the create table configuration to allow 4000 errors and it worked, so it must be a problem with the 3894 rows in the message, but this error message does not tell me much about which rows or why.
Thanks
I'm finally managed to see the error stream by running the following command in the terminal:
bq --format=prettyjson show -j <JobID>
It returns a JSON with more details.
In my case it was:
"message": "Error while reading data, error message: Could not parse '16.66666666666667' as int for field Course_Percentage (position 46) starting at location 1717164"
You should be able to click on Job History in the BigQuery UI, then click the failed load job. I tried loading an invalid CSV file just now, and the errors that I see are:
Errors:
Error while reading data, error message: CSV table encountered too many errors, giving up. Rows: 1; errors: 1. Please look into the error stream for more details. (error code: invalid)
Error while reading data, error message: CSV table references column position 1, but line starting at position:0 contains only 1 columns. (error code: invalid)
The first one is just a generic message indicating the failure, but the second error (from the "error stream") is the one that provides more context for the failure, namely CSV table references column position 1, but line starting at position:0 contains only 1 columns.
Edit: given a job ID, you can also use the BigQuery CLI to see complete information about the failure. You would use:
bq --format=prettyjson show -j <job ID>
Using python client it's
from google.api_core.exceptions import BadRequest
job = client.load_table_from_file(*args, **kwargs)
try:
result = job.result()
except BadRequest as ex:
for err in ex.errors:
print(err)
raise
# or alternatively
# job.errors
You could also just do.
try:
load_job.result() # Waits for the job to complete.
except ClientError as e:
print(load_job.errors)
raise e
This will print the errors to screen or you could log them etc.
Following the rest of the answers, you could also see this information in the GCP logs (Stackdriver) tool.
But It might happen that this does not answer your question. It seems like there are detailed errors (such as the one Elliot found) and more imprecise ones. Which gives you no description at all independently of the UI you're using to explore it.
When I am trying to run corpus pipeline on language resources. It is throwing the below (even though I follow the order as Document reset, english tokeniser, sentence splitter)
Can someone help me with the process to debug this run-time error
Error:
gate.creole.ExecutionException: No sentences or tokens to process in document Password_Safe-window1.txt_0003E
Please run a sentence splitter and tokeniser first!
at gate.creole.POSTagger.execute(POSTagger.java:257)
at gate.util.Benchmark.executeWithBenchmarking(Benchmark.java:291)
at gate.creole.SerialController.runComponent(SerialController.java:225)
at gate.creole.SerialController.executeImpl(SerialController.java:157)
at gate.creole.SerialAnalyserController.executeImpl(SerialAnalyserController.java:223)
at gate.creole.SerialAnalyserController.execute(SerialAnalyserController.java:126)
at gate.util.Benchmark.executeWithBenchmarking(Benchmark.java:291)
at gate.gui.SerialControllerEditor$RunAction$1.run(SerialControllerEditor.java:1759)
at java.lang.Thread.run(Thread.java:745)
Edit:
The files are not empty. As i tried to implement #dedek's suggestion, it has thrown no errors. But raised one more problem as follows:
Exception in thread "ApplicationViewer1" java.lang.OutOfMemoryError: Java heap space
I think it is because your document is empty.
Can you confirm that?
There is a run-time param failOnMissingInputAnnotations of the POSTagger, set it to false and it should be ok.
See also the docs:
failOnMissingInputAnnotations - if set to false, the PR will not fail with an ExecutionException if no input Annotations are found and instead only log a single warning message per session and a debug message per document that has no input annotations (run-time, default = true).
Concerning the OutOfMemoryError: Java heap space
See following questions:
Getting OOM while using GATE on large data set
GATE PersistenceManager.loadObjectFromFile outofmemory error while loading .gapp files
JAVA PermGem memory
I want to analyze an error log. So I decided to search for all the error header in the error log using Notepad++ so I can get all the first line of the errors on search result (which contains short description about the error) to determine if I need to look deeper into it. But the error log apparently is full of 'useless' error log from one kind of event, like 90% of it, so it kinds of hide the real error, like searching a needle in haystack.
So from this example made up error log:
ERROR on Server1: Network connection reset.
DETAIL: The client is gone.
ERROR on Server2: Network connection reset.
DETAIL: The client is gone.
ERROR on Server1: Network connection reset.
DETAIL: The client is gone.
ERROR on Server1: Null Pointer Error.
DETAIL: Object 'Cart' does not exists.
STACKTRACE:
at UpdateCart function
at AddProducttoCart function
ERROR on Server2: Network connection reset.
DETAIL: The client is gone.
ERROR on Server2: IO Error
DETAIL: The resource on URL (www.example.com/data.xls) does not exists.
ERROR on Server2: Network connection reset.
DETAIL: The client is gone.
I want to create a regex on Notepad++ search that search for line that contains string "ERROR on" but does not contain "Network connection reset", so the search result will only contain:
ERROR on Server1: Null Pointer Error.
ERROR on Server2: IO Error
How can I do that? I've read somewhere that inverse matching on regex is somewhat hard and unusual, but it's possible. Thanks.
Btw, I've tried some other way to do this, like finding for "ERROR on" + (.*) + "Network connection reset", then replace it with empty string, so that next time I search for "ERROR on", they will not appear. But the error log becomes scrambled with weird symbols after the search and replace, and Notepad++ kinda crashing after that. I don't know. I never have any luck search and replace on Notepad++ using regex.
I would use negative lookahead.
^(?!.*?\bNetwork connection reset\b).*\bERROR on\b.*
^ERROR on (?:(?!Network connection reset).)*$
You can use a lookahead in your regex.See demo.
https://regex101.com/r/pV0fH2/1
I am currently using cURL to communicate to a cloud site... everything is going well except for an annoying issue. The issue is that I cannot get the site's xml response when there is an error. for example, when I use Wire Shark to check the transfer I can see that in the HTTP header that I'm getting which contains the error code; there is an XML data that contains in addition to the error code, a message that describes the code. I have tried many cURL options to try and get the XML but all my attempts failed.
Could someone tell me how can I get the XML. please note that I'm using the cURL C APIs as my code is in c++ and moreover, I can get XML responses when the operation succeeds using my write callback function.
Set CURLOPT_FAILONERROR to 0. If this is set to 1, then any HTTP response >= 300 will result in an error rather than processing like you want.