I downloaded opencv3.0 & opencv_contrib then used Cmake-GUI to compile the libraries. I have my flags WITH_CUDA=ON, WITH_OPENCL=ON, WITH_OPENMP=ON.
I made sure I am generating for VS 2013 64-bit. Cmake-GUI runs perfectly fine.
Issue is building OpenCV solution file in VS 2013. I keep getting errors like in the below attached photo.
My CUDA samples are running perfectly fine.
I am not sure whether if i am missing something in the process or is it a bug?
CUDA - 7.5
OpenCV3.0
VS 2013
Related
I have a small Linux project which has a OpenCV as its dependency.
In Linux (Ubuntu: running in VMware), I’ve already compiled and built it by using bash script without any error.
In order to develop it more efficiently, I’m going to import it into Visual Studio 2015 from Ubuntu by using VisualGDB.
According to https://visualgdb.com/tutorials/linux/import/, I’ve imported it into VS2015 successfully, but whenever I built it, I have got a following error:
“Error MSB3073 The command “”C:\Program Files (x86)\Sysprogs\VisualGDB\VisualGDB.exe” /build “D:\tmp\LinuxProject3\LinuxProject3\LinuxProject3.vcxproj” “/solution:D:\tmp\LinuxProject3\LinuxProject3.sln” “/config:Debug” “/platform:VisualGDB”” exited with code 1.”
In order to check out whether my project had a problem or not, I imported the source of Midnight Commander just illustrated in above link with all default setting without any changes, but unfortunately the result was same.
By the way, there is no error in creating(not importing) new Linux C++ project, connecting with VMware, compiling, building and debugging in VS2015.
What’s wrong? What mistakes did I make?
I developped a Qt 5.5 application using OpenCV and Flycapture camera libraries in Visual Studio 2013. Now, I would like to compile, build, and run this code in Ubuntu 14.04. I kept track of the steps in that link. After applying the step 11, I encountered this error message. Actually, I added the include path of Flycapture in Visual Studio. I don’ t know how to fix this problem.
You need to compile that library on Ubuntu then include it in your project.
So I have this small application of mine I'm trying to deploy using visual studio. I have Intel parallel studio 2011 added to visual studio, and I'm compiling this program using Intel within VS because I'm using OpenMP task construct which is not supported in VS2010. I added a deployment project to my solution and built a setup. Dependencies are detected as follows:
glu32.dll opengl32.dll and libiomp5md.dll
Now I'm trying to test this setup file to see if it works. I have Windows XP Mode installed and I access the setup file, I setup my application, decencies are copied just fine but:
When I try to run the application first time I got an error saying:
The entry point _ftol2 could not be loacted in the dynamic link library msvcrt.dll
I found solution to this problem by removing glu32.dll and opengl32.dll and adding glut32.dll to my windows/system folder.
But then it comes up with this second error saying:
The application or dll ".....\libiomp5md.dll" is not a valid windows image. please check this against your installation diskette
again I googled and I got this and it didn't work.
Reminder: I'm using Win7 x64 and Visual Studio 2010 with Intel Parallel Studio 2011.
I guess you need to install the redistributable libraries on the target machine.
I'm confused about getting Qt working with Visual Studio Express. Most of the searches online have turned up instructions for compiling Qt using instructions such as:
Install MSVC2005 or MSVC2008
Install the most recent Platform SDK (# MSDN: "Platform SDK for Windows
Server 2003 R2")
From the Platform SDK, you'll need to install at least the base +
internet options
Then, download and extract a recent snapshot or the preview release to
D:\Qt\4.x.x
Open up a console with the MSVC settings loaded (see MSVC Tools-menu)
and go to your Qt directory
Type "configure -platform win32-msvc2005" without the quotation
marks
That will build you the project files you'll need
After that, it's as simple as running "nmake" and drinking a lot of
coffee
Then, add D:\Qt\4.x.x\bin and
D:\Qt\4.x.x\lib to your path
environment variable, and you'll be
able to use this version of Qt from
everywhere on your system. The latter
could be added to the library section
in the options from MSVC as well.
(from http://www.qtcentre.org/threads/11710-Visual-Studio-2005-Express)
However, when I go to the download page of Qt (http://qt.nokia.com/downloads), there is a download for Visual Studio labeled:
"Qt libraries 4.7.1 for Windows (VS 2008, 228 MB)"
I'm confused, do I actually still need to build it? Or is it already built?
Using the downloadable exe from qt (http://get.qt.nokia.com/qt/source/qt-win-opensource-4.7.1-vs2008.exe) does not seem to work with Visual Studio 2010. I tried building a simple hello world program from the command line which would not run. I'll repeat my comment from a previous answer.
I tried the hello world example from
doc.qt.nokia.com/4.7/gettingstartedqt.html.
I was able to build the project and an
exe is generated. However, the exe
fails to run and generates a system
error dialog box about "side-by-side
configuration is incorrect...". I ran
SxsTrace and it says:
...
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC90.DebugCRT\ 9.0.21022.8__...\Microsoft.VC90.DebugCRT.DLL.
INFO: Attempt to probe manifest at C:\qthello\debug\Microsoft.VC90.DebugCRT.DLL.
INFO: Attempt to probe manifest at C:\qthello\debug\Microsoft.VC90.DebugCRT.MANIFEST.
INFO: Attempt to probe manifest at C:\qthello\debug\Microsoft.VC90.DebugCRT\Microsoft.VC90.DebugCRT.DLL.
INFO: Attempt to probe manifest at C:\qthello\debug\Microsoft.VC90.DebugCRT\Microsoft.VC90.DebugCRT.MANIFEST.
INFO: Did not find manifest for culture Neutral.
INFO: End assembly probing.
ERROR: Cannot resolve reference Microsoft.VC90.DebugCRT,processorArchitecture="x86", publicKeyToken="...",type="win32",version="9.0.21022.8".
ERROR: Activation Context generation failed.
End Activation Context Generation.
To me, it looks like its trying to use
VS2008 (which I don't have). It makes
sense I guess since the download is
for VS2008.
I was in the process of compiling qt 4.7.1 using the instructions in my question (using win32-msvc2010 as my platform target however) as I asked this SO question and the compilation finished. I rebuilt the hello world project and the exe runs. So it seems like the answer is in order to use with Visual Studio Express 2010 you currently do need to compile (at least until Qt releases a VS2010 download option). However, I believe if you are using VS2008 then you will not need to compile.
The Qt binaries provided by Nokia for Windows target either MinGW or Visual Studio 2008, both for compiling 32bit executables. If you need Qt binaries for VS 2005 (32bit), you may find them in their archives.
For everything else, you need to compile Qt yourself. Especially for:
Visual Studio 2008 64 bit
Visual Studio 2008 Express Edition 64 bit: You need the Windows SDK 7.0 which provides the 64 bit compilers and compile Qt with those.
Visual Studio 2010 32 bit and 64 bit
In general, you cannot link libraries compiled with different compilers, i.e. use the Qt binaries built with VC 9.0 (VS 2008) 32 bit and link them to an executable built with VC 10.0 (VS 2010) 32 bit.
Just a small update on this.
Downloading the QTSDK (and using cmake instead of qmake everything looks like working quite well. Except for the fact that the installer of QTSDK didn't update the path for qmake.exe and you've to do by hand.
Tested with QtSDK 4.8 and visual studio express 2010
http://qt.nokia.com/downloads has a link called qt-vs-addin-1.1.7.exe (57 MB)
You'll probably need that one as well . .
I don't think you need to compile the libraries since there is a download for them now . .
So get the 228 MB of libs and 57 MB plugin and you should be set.
DISCLAIMER: I don't use MSVC (yet?) so please let me know if it works.
I need a spellcheck tool for my MS C++ (MFC) project. It looks like hunspell is a good choice. However, I found it difficult to compile with visual studio. Can someone help?
Here is what I have done:
I downloaded hunspell from sourceforge, the version is 1.2.14. Unzipped it.
Created an empty solution in visual studio and added the projects into it. The project files are under win_api directory.
Then I tried to compile it, and got a bunch of errors.
By the way, my operating system Vista (x64).
Please help.
Thanks for the reply.
Today, I tried it on a Windows XP (x86) system and it compiled without errors.
The error message with Vista x64 was: error c2552: non-aggregates cannot be initialized with initializer list. It is for file 'utf_info.cxx'. It's strange that XP x86 works fine.
It seems the version 1.2.12 works fine, for both 32 and 64-bit machines.
This appears to be a known bug.
There's now a patch available, which has been integrated into the CVS as of January 13, 2011. Make sure that you grab the latest copy of the source.