I should make a program where in a given array of elements I should calculate the minimum amount of elements I should change in order to have no duplicates next to each other.
The windows are in every room and they are all at the same height, so when Mendo walks around the house and looks at them from the outside the windows look like they are stacked in a row. Mendo has three types of colors (white, gray and blue) and wants to color the windows so that there are no two windows that are the same color and are one after the other.
Write a program that will read from the standard input information about the number of windows and the price of coloring each of them with a certain color, and then print the minimum coloring cost of all windows on standard output.
The first line contains an integer N (2 <= N <= 20), which indicates the number of windows. In each of the following N rows are written 3 integers Ai, Bi, Ci (1 <= Ai, Bi, Ci <= 1000), where Ai, Bi, and Ci denote the coloring values of the i window in white , gray and blue, respectively.
Test case:
Input:
3 5 1 5
1 5 5
5 1 1
Output:
3
Also, I should keep in mind that the first element and the last one are considered neighbour-elements.
I started by sorting the array for some reason.
int main()
{
int N;
cin >> N;
int Ai, Bi, Ci;
int A[N * 3];
int A_space = 0;
for (int i = 0; i < N; i++) {
cin >> Ai >> Bi >> Ci;
A[A_space] = Ai;
A[A_space + 1] = Bi;
A[A_space + 2] = Ci;
A_space += 3;
}
for (int i = 0; i < N * 3; i++) {
for (int j = 0; j < N * 3; j++) {
if (A[j] > A[j + 1]) {
swap(A[j], A[j + 1]);
}
}
}
return 0;
}
This problem can be solved by dynamic programming. You will need an N x 3 matrix for this. You will need to calculate the minimum cost of painting the window on each of the 3 colors for each of the N windows. Note that for each color it is enough to take the minimum from the cost of painting N-1 windows on the other two colors because you cannot use the same color 2 times in a row.
Question:
Fox Ciel is writing an AI for the game Starcraft and she needs your help.
In Starcraft, one of the available units is a mutalisk. Mutalisks are very useful for harassing Terran bases. Fox Ciel has one mutalisk. The enemy base contains one or more Space Construction Vehicles (SCVs). Each SCV has some amount of hit points.
When the mutalisk attacks, it can target up to three different SCVs.
The first targeted SCV will lose 9 hit points.
The second targeted SCV (if any) will lose 3 hit points.
The third targeted SCV (if any) will lose 1 hit point.
If the hit points of a SCV drop to 0 or lower, the SCV is destroyed. Note that you may not target the same SCV twice in the same attack.
You are given a int[] HP containing the current hit points of your enemy's SCVs. Return the smallest number of attacks in which you can destroy all these SCVs.
Constraints-
- x will contain between 1 and 3 elements, inclusive.
- Each element in x will be between 1 and 60, inclusive.
And the solution is:
int minimalAttacks(vector<int> x)
{
int dist[61][61][61];
memset(dist, -1, sizeof(dist));
dist[0][0][0] = 0;
for (int total = 1; total <= 180; total++) {
for (int i = 0; i <= 60 && i <= total; i++) {
for (int j = max(0, total - i - 60); j <= 60 && i + j <= total; j++) {
// j >= max(0, total - i - 60) ensures that k <= 60
int k = total - (i + j);
int & res = dist[i][j][k];
res = 1000000;
// one way to avoid doing repetitive work in enumerating
// all options is to use c++'s next_permutation,
// we first createa vector:
vector<int> curr = {i,j,k};
sort(curr.begin(), curr.end()); //needs to be sorted
// which will be permuted
do {
int ni = max(0, curr[0] - 9);
int nj = max(0, curr[1] - 3);
int nk = max(0, curr[2] - 1);
res = std::min(res, 1 + dist[ni][nj][nk] );
} while (next_permutation(curr.begin(), curr.end()) );
}
}
}
// get the case's respective hitpoints:
while (x.size() < 3) {
x.push_back(0); // add zeros for missing SCVs
}
int a = x[0], b = x[1], c = x[2];
return dist[a][b][c];
}
As far as i understand, this solution calculates all possible state's best outcome first then simply match the queried position and displays the result. But I dont understand the way this code is written. I can see that nowhere dist[i][j][k] value is edited. By default its -1. So how come when i query any dist[i][j][k] I get a different value?.
Can someone explain me the code please?
Thank you!
I'm building a heatmap-like rectangular array interface and I want the 'hot' location to be at the top left of the array, and the 'cold' location to be at the bottom right. Therefore, I need an array to be filled diagonally like this:
0 1 2 3
|----|----|----|----|
0 | 0 | 2 | 5 | 8 |
|----|----|----|----|
1 | 1 | 4 | 7 | 10 |
|----|----|----|----|
2 | 3 | 6 | 9 | 11 |
|----|----|----|----|
So actually, I need a function f(x,y) such that
f(0,0) = 0
f(2,1) = 7
f(1,2) = 6
f(3,2) = 11
(or, of course, a similar function f(n) where f(7) = 10, f(9) = 6, etc.).
Finally, yes, I know this question is similar to the ones asked here, here and here, but the solutions described there only traverse and don't fill a matrix.
Interesting problem if you are limited to go through the array row by row.
I divided the rectangle in three regions. The top left triangle, the bottom right triangle and the rhomboid in the middle.
For the top left triangle the values in the first column (x=0) can be calculated using the common arithmetic series 1 + 2 + 3 + .. + n = n*(n+1)/2. Fields in the that triangle with the same x+y value are in the same diagonal and there value is that sum from the first colum + x.
The same approach works for the bottom right triangle. But instead of x and y, w-x and h-y is used, where w is the width and h the height of rectangle. That value have to be subtracted from the highest value w*h-1 in the array.
There are two cases for the rhomboid in the middle. If the width of rectangle is greater than (or equal to) the height, then the bottom left field of the rectangle is the field with the lowest value in the rhomboid and can be calculated that sum from before for h-1. From there on you can imagine that the rhomboid is a rectangle with a x-value of x+y and a y-value of y from the original rectangle. So calculations of the remaining values in that new rectangle are easy.
In the other case when the height is greater than the width, then the field at x=w-1 and y=0 can be calculated using that arithmetic sum and the rhomboid can be imagined as a rectangle with x-value x and y-value y-(w-x-1).
The code can be optimised by precalculating values for example. I think there also is one formula for all that cases. Maybe i think about it later.
inline static int diagonalvalue(int x, int y, int w, int h) {
if (h > x+y+1 && w > x+y+1) {
// top/left triangle
return ((x+y)*(x+y+1)/2) + x;
} else if (y+x >= h && y+x >= w) {
// bottom/right triangle
return w*h - (((w-x-1)+(h-y-1))*((w-x-1)+(h-y-1)+1)/2) - (w-x-1) - 1;
}
// rhomboid in the middle
if (w >= h) {
return (h*(h+1)/2) + ((x+y+1)-h)*h - y - 1;
}
return (w*(w+1)/2) + ((x+y)-w)*w + x;
}
for (y=0; y<h; y++) {
for (x=0; x<w; x++) {
array[x][y] = diagonalvalue(x,y,w,h);
}
}
Of course if there is not such a limitation, something like that should be way faster:
n = w*h;
x = 0;
y = 0;
for (i=0; i<n; i++) {
array[x][y] = i;
if (y <= 0 || x+1 >= w) {
y = x+y+1;
if (y >= h) {
x = (y-h)+1;
y -= x;
} else {
x = 0;
}
} else {
x++;
y--;
}
}
What about this (having an NxN matrix):
count = 1;
for( int k = 0; k < 2*N-1; ++k ) {
int max_i = std::min(k,N-1);
int min_i = std::max(0,k-N+1);
for( int i = max_i, j = min_i; i >= min_i; --i, ++j ) {
M.at(i).at(j) = count++;
}
}
Follow the steps in the 3rd example -- this gives the indexes (in order to print out the slices) -- and just set the value with an incrementing counter:
int x[3][3];
int n = 3;
int pos = 1;
for (int slice = 0; slice < 2 * n - 1; ++slice) {
int z = slice < n ? 0 : slice - n + 1;
for (int j = z; j <= slice - z; ++j)
x[j][slice - j] = pos++;
}
At a M*N matrix, the values, when traversing like in your stated example, seem to increase by n, except for border cases, so
f(0,0)=0
f(1,0)=f(0,0)+2
f(2,0)=f(1,0)+3
...and so on up to f(N,0). Then
f(0,1)=1
f(0,2)=3
and then
f(m,n)=f(m-1,n)+N, where m,n are index variables
and
f(M,N)=f(M-1,N)+2, where M,N are the last indexes of the matrix
This is not conclusive, but it should give you something to work with. Note, that you only need the value of the preceding element in each row and a few starting values to begin.
If you want a simple function, you could use a recursive definition.
H = height
def get_point(x,y)
if x == 0
if y == 0
return 0
else
return get_point(y-1,0)+1
end
else
return get_point(x-1,y) + H
end
end
This takes advantage of the fact that any value is H+the value of the item to its left. If the item is already at the leftmost column, then you find the cell that is to its far upper right diagonal, and move left from there, and add 1.
This is a good chance to use dynamic programming, and "cache" or memoize the functions you've already accomplished.
If you want something "strictly" done by f(n), you could use the relationship:
n = ( n % W , n / H ) [integer division, with no remainder/decimal]
And work your function from there.
Alternatively, if you want a purely array-populating-by-rows method, with no recursion, you could follow these rules:
If you are on the first cell of the row, "remember" the item in the cell (R-1) (where R is your current row) of the first row, and add 1 to it.
Otherwise, simply add H to the cell you last computed (ie, the cell to your left).
Psuedo-Code: (Assuming array is indexed by arr[row,column])
arr[0,0] = 0
for R from 0 to H
if R > 0
arr[R,0] = arr[0,R-1] + 1
end
for C from 1 to W
arr[R,C] = arr[R,C-1]
end
end
I have this assigment in university where I'm given the code of a C++ game involving pathfinding. The pathfinding is made using a wave function and the assigment requires me to make a certain change to the way pathfinding works.
The assigment requires the pathfinding to always choose the path farthest away from any object other than clear space. Like shown here:
And here's the result I've gotten so far:
Below I've posted the part of the Update function concerning pathfinding as I'm pretty sure that's where I'll have to make a change.
for (int y = 0, o = 0; y < LEVEL_HEIGHT; y++) {
for (int x = 0; x < LEVEL_WIDTH; x++, o++) {
int nCost = !bricks[o].type;
if (nCost) {
for (int j = 0; j < 4; j++)
{
int dx = s_directions[j][0], dy = s_directions[j][1];
if ((y == 0 && dy < 0)
|| (y == LEVEL_HEIGHT - 1 && dy > 0)
|| (x == 0 && dx < 0)
|| (x == LEVEL_WIDTH - 1 && dx > 0)
|| bricks[o + dy * LEVEL_WIDTH + dx].type)
{
nCost = 2;
break;
}
}
}
pfWayCost[o] = (float)nCost;
}
}
Also here is the Wave function if needed for further clarity on the problem.
I'd be very grateful for any ideas on how to proceed, since I've been struggling with this for quite some time now.
Your problem can be reduced to a problem known as minimum-bottle-neck-spanning-tree.
For the reduction do the following:
calculate the costs for every point/cell in space as the minimal distance to an object.
make a graph were edges correspond to the points in the space and the weights of the edges are the costs calculated in the prior step. The vertices of the graph corresponds to the boundaries between cell.
For one dimensional space with 4 cells with costs 10, 20, 3, 5:
|10|20|3|5|
the graph would look like:
A--(w=10)--B--(w=20)--C--(w=3)--D--(w=5)--E
With nodes A-E corresponding to the boundaries of the cells.
run for example the Prim's algorithm to find the MST. You are looking for the direct way from the entry point (in the example above A) to the exit point (E) in the resulting tree.
I have a c[N][M] matrix where I apply a max-sum operation over a (K+1)² window. I am trying to reduce the complexity of the naive algorithm.
In particular, here's my code snippet in C++:
<!-- language: cpp -->
int N,M,K;
std::cin >> N >> M >> K;
std::pair< unsigned , unsigned > opt[N][M];
unsigned c[N][M];
// Read values for c[i][j]
// Initialize all opt[i][j] at (0,0).
for ( int i = 0; i < N; i ++ ) {
for ( int j = 0; j < M ; j ++ ) {
unsigned max = 0;
int posX = i, posY = j;
for ( int ii = i; (ii >= i - K) && (ii >= 0); ii -- ) {
for ( int jj = j; (jj >= j - K) && (jj >= 0); jj -- ) {
// Ignore the (i,j) position
if (( ii == i ) && ( jj == j )) {
continue;
}
if ( opt[ii][jj].second > max ) {
max = opt[ii][jj].second;
posX = ii;
posY = jj;
}
}
}
opt[i][j].first = opt[posX][posY].second;
opt[i][j].second = c[i][j] + opt[posX][posY].first;
}
}
The goal of the algorithm is to compute opt[N-1][M-1].
Example: for N = 4, M = 4, K = 2 and:
c[N][M] = 4 1 1 2
6 1 1 1
1 2 5 8
1 1 8 0
... the result should be opt[N-1][M-1] = {14, 11}.
The running complexity of this snippet is however O(N M K²). My goal is to reduce the running time complexity. I have already seen posts like this, but it appears that my "filter" is not separable, probably because of the sum operation.
More information (optional): this is essentially an algorithm which develops the optimal strategy in a "game" where:
Two players lead a single team in a N × M dungeon.
Each position of the dungeon has c[i][j] gold coins.
Starting position: (N-1,M-1) where c[N-1][M-1] = 0.
The active player chooses the next position to move the team to, from position (x,y).
The next position can be any of (x-i, y-j), i <= K, j <= K, i+j > 0. In other words, they can move only left and/or up, up to a step K per direction.
The player who just moved the team gets the coins in the new position.
The active player alternates each turn.
The game ends when the team reaches (0,0).
Optimal strategy for both players: maximize their own sum of gold coins, if they know that the opponent is following the same strategy.
Thus, opt[i][j].first represents the coins of the player who will now move from (i,j) to another position. opt[i][j].second represents the coins of the opponent.
Here is a O(N * M) solution.
Let's fix the lower row(r). If the maximum for all rows between r - K and r is known for every column, this problem can be reduced to a well-known sliding window maximum problem. So it is possible to compute the answer for a fixed row in O(M) time.
Let's iterate over all rows in increasing order. For each column the maximum for all rows between r - K and r is the sliding window maximum problem, too. Processing each column takes O(N) time for all rows.
The total time complexity is O(N * M).
However, there is one issue with this solution: it does not exclude the (i, j) element. It is possible to fix it by running the algorithm described above twice(with K * (K + 1) and (K + 1) * K windows) and then merging the results(a (K + 1) * (K + 1) square without a corner is a union of two rectangles with K * (K + 1) and (K + 1) * K size).