When I try to build a project in Windows, I run one script - start.py, and project IS built successfully.
When I try to build using Jenkins (in win and with the same user), the build comes to 60% and fails with errors:
NMAKE : fatal error U1077: 'C:\PROGRA~2\MICROS~2.0\VC\bin\cl.exe' : return code '0x2'
Stop.
Failed to run make: ['nmake', 'install']
What can I do to fix this?
UPD: Error occurs when more than one build runs at the same time.
Fix: run builds in queue
Environment variables are one critical part that differs when triggering a build from jenkins. Make sure you are not missing any path in $PATH that may prevent you build. You can try printing path variable by adding a execute shell command at build operations
Related
I run gradle to build an android .aar and it reports that it can't find a file, but the file definitely is there.
$ ./gradlew.bat assembleRelease
> Task :webrtc-native:externalNativeBuildRelease FAILED
Build mrwebrtc arm64-v8a
ninja: error: 'C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp', needed by 'CMakeFiles/mrwebrtc.dir/C_/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp.o', missing and no known rule to make it
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':webrtc-native:externalNativeBuildRelease'.
> Build command failed.
Error while executing process C:\Users\User\AppData\Local\Android\Sdk\cmake\3.10.2.4988404\bin\cmake.exe with arguments {--build C:\Developer\Microsoft-MRWebRTC\tools\build\android\webrtc-native\.externalNativeBuild\cmake\release\arm64-v8a --target mrwebrtc}
ninja: error: 'C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp', needed by 'CMakeFiles/mrwebrtc.dir/C_/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp.o', missing and no known rule to make it
But the file C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp is definitely there.
$ cd C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/
User MSYS /c/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop (master)
$ ls
data_channel_interop.cpp global_factory.cpp interop_api.cpp local_video_track_interop.cpp remote_audio_track_interop.cpp transceiver_interop.cpp
external_video_track_source_interop.cpp global_factory.h local_audio_track_interop.cpp peer_connection_interop.cpp remote_video_track_interop.cpp
Could anyone help? I am kind of running out of ideas on this.
I discovered it was because I had 'caseSensitive' flags enabled on some of my directories. Be careful, this is a new feature of WSL2 and there are some peculiarities where you may be enabled in without realizing. Windows cmake cannot traverse directories that have this flag enabled on them.
Read about it here:
https://devblogs.microsoft.com/commandline/per-directory-case-sensitivity-and-wsl/
I am trying to compile an existing qt application's code using mingw compiler.
During compilation I am getting an error "*** internal error: unable to open jobserver semaphore '3,4': (Error 2: The system cannot find the file specified. ). Stop".
My current project is a makefile based project. Here I have one make file (parent.mk) that compiles all primary modules and then
parent.mk
compilation steps
.
.
.
make $QT_CODE_DIR
Here in this QT code directory I have another makefile (child.mk) which has following content:
child.mk
cd "qtcode_compilation_out_dir"
qmake.exe "product.pro" -r -spec win32-g++
CONFIG+=release
mingw32-make -w
If I try to run the make command manually for QT code then it works fine.
#Alexander: Thanks for the suggestion.
Please suggest if anyone has any idea about it.
Thanks.
Finally, I found out the exact reason of the problem and solution as well.
Reason for failure:
The compilation command that I am using is "make" which is been aliased to "make -j2"and along with "mingw32-make -w" it was producing the error because mingw32-make is an obsolete make command and it doesn't support multi threaded compilation.
Solution:
I just replaced the mingw32-make with make.
Disclaimer: I am new here, I've done my best to follow the posting guidelines so please let me know if this needs any extra information. I am also relatively new to Linux development.
Background:
I am in the process of building a library using ActiveMQ-cpp on Linux. I have built and run it successfully on the host Ubuntu PC, but attempting to cross-compile it for the target ARM-based machine is producing some very abstruse errors.
The first step involves building APR (http://apr.apache.org/) using the arm-linux-gcc compiler. After some research, the following command runs the configuration script with little fuss:
CC=/usr/local/arm-linux/bin/arm-linux-gcc ./configure --prefix=/root/apr-arm --host=arm-linux cross_compiling=yes ac_cv_file__dev_zero=no ac_cv_func_setpgrp_void=no apr_cv_tcp_nodelay_with_cork=no apr_cv_process_shared_works=no
This allows the next step - running the makefile.
Current Issue: Entering make on the command line exits prematurely at the following line:
[...]
/root/.local/share/Trash/files/apr-1.5.1/build/mkdir.sh include/private
tools/gen_test_char > include/private/apr)escape_test_char.h
/bin/bash: tools/gen_test_char: cannot execute binary file
make[1]: *** [include/private/apr_escape_test_char.h] Error 126
make[1]: Leaving directory `/root/.local/share/Trash/files/apr-1.5.1'
make: *** [all-recursive] Error 1
Attempted Fixes: A solution to the following question, posted by the asker, has not worked. It is possible that I've not followed the process correctly (Apache Cross Compilation Error ./gen_test_char: cannot execute binary file)
In the same theme, I tried temporarily removing the problem gen_test_char program from its directory but the clever script just rebuilds it.
My aim is to either avoid this error and continue the build process on Ubuntu, or perhaps consider other means of building the library. I have built it with no trouble in VS2013 on Windows, so if it is possible to cross compile that project for ARM architectures I would happily go ahead with that.
APR need gen_test_char to be compiled for system not for arm, why you got "bin/bash: tools/gen_test_char: cannot execute binary file" error because make program is going to execute gen_test_char on your system and if you cross compile then every time you got this error.
To avoid this error please follow below steps:
1) Cross compile APR which is going to fail
2) compile APR for system and copy gen_test_char to cross compiled APR's directory.
3) Again cross compile
After performing above steps you should not get "cannot execute binary file" error.
Cross compile APR which is going to fail
compile APR for system and copy gen_test_char to cross compiled APR's directory.
change the name of gen_test_char to gen_test_char_host
in Makefile file change the name of gen_test_char to gen_test_char_host because make creates it again.
Again cross compile
you may see some struct redefinition which needs to find the file and comment the redefined struct manually.
Its kinda an odd story. I'm trying to build the openssl library. Well, it is not the first time I'm doing it and until now it was fine. however, I've desided to add a build configuration to TeamCity (actually the problem has nothing to do with TeamCity)to build all my third parties libraries on-demand. So, I created a step with common set of openssl build commands:
perl Configure VC-WIN64A
ms\do_win64a.bat
nmake /d /f ms\ntdll.mak
... and the build failed while assembling the very first asm file. So I ran same commands in VS2012 x64 command prompt and the build succedeed, as expected. It took a while untill I figured out that the problem is in output redirection. Teamcity redirects output from build step to the teamcity build log, so did I by adding ">1.txt" to "nmake /d /f ms\ntdll.mak" command, and the build failed. I would say it is somewhat unexpected reason for build to fail.
So far, I've tried:
Building the same from VS2010 command prompt with redirection,
failed.
Building the same from VS2010 command prompt without
redirection, succeded.
Building the same from VS2010/VS2012 command
prompt with redirection to file and forcing redirection to CON (nmake
/d /f ms\ntdll.mak >CON >1.txt) failed.
Googling for "nmake problems
when console output is redirected" - nothing
Googling for "openssl
build problems when console output is redirected" - nothing
My setup
- Win2008R2, virtual machine.
- VS2010, latest updates
- VS2012, Update 1
Actual error:
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\BIN\amd64\ml64.EXE"' : return code '0x1'
ml64.exe complains about the asm file stating it should end with "END" statement. It does, but...
Any ideas?
Ok, since the problem is in perl and writing files to stdout and then redirecting it you have to change following files to build x64 version:
crypto\aes\asm\aes-x86_64.pl
crypto\bn\asm\modexp512-x86_64.pl
crypto\bn\asm\x86_64-gf2m.pl
crypto\bn\asm\x86_64-mont.pl
crypto\bn\asm\x86_64-mont5.pl
crypto\md5\asm\md5-x86_64.pl
crypto\modes\asm\ghash-x86_64.pl
crypto\rc4\asm\rc4-md5-x86_64.pl
crypto\rc4\asm\rc4-x86_64.pl
crypto\sha\asm\sha1-x86_64.pl
crypto\sha\asm\sha512-x86_64.pl
crypto\whrlpool\asm\wp-x86_64.pl
crypto\x86_64cpuid.pl
engines\asm\e_padlock-x86_64.pl
you have to open these files and change all "open STDOUT "whateverfile"" to something like "open my $asmfile "whaeverfile"", then take care of string concatenation (only in x86_64cpuid.pl) and then print it to the file instead of STDOUT, something like "print $code" to "print $asm $code"
and of course, dont forget to close the file, in another words change the "close STDOUT" to "close $asmfile"
Obviously when building target other than x64 one will have to change another set of files.
Will try to communicate it to openssl maintainer.
So I have this project I'm working on, and every time I build, it builds then executes the program, and then finishes with a build error. Why does this happen? I can't seem to find in the project properties where it would execute the file on the build.
It is kind of annoying, and it also ends up spawning an error. Here's an excerpt from the output
2>Link:
2> Generating code
2>c:\users\d0c\desktop\jlrria.lottery.repo\trunc\hash\hl_hashwrapper.h(277): warning C4706: assignment within conditional expression
2> Finished generating code
2> lottery-gui.vcxproj -> C:\Users\d0c\Desktop\jlrria.Lottery.repo\trunc\build\Release\lotteryslayer.exe
2>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(741,5): warning MSB3073: The command ""C:\Users\d0c\Desktop\jlrria.Lottery.repo\trunc\build\Release\lotteryslayer.exe" /RegServerRedirect" exited with code 2.
2> The previous error was converted to a warning because the task was called with ContinueOnError=true.
2> Build continuing because "ContinueOnError" on the task "Exec" is set to "true".<br>
2>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(744,5): error MSB8011: Failed to register output. Please try enabling Per-user Redirection or register the component from a command prompt with elevated permissions.
2>
2>Build FAILED.
So I guess I'm looking for help with two things
First and most importantly: Why is it executing the build program
Second: Why am I getting this error?
thanks.
ALSO
There are no items in the post build, otherwise, the log above would say "post-build" :p
Start with Visual Studio with Administrator rights. You can do so by right clicking on VS shortcut and Select Run As Administrator. Or create a shortcut where you would enable Run As Admin.
Reason:
Look at the error:
error MSB8011: Failed to register output. Please try enabling Per-user Redirection or register the component from a command prompt with elevated permissions.
Also, it seems to be a DLL/ActiveX control project. Look at: Linker->General->Register Output and set it to NO.
You are building an ATL project? Seems to be a bug in VS2010, http://social.msdn.microsoft.com/Forums/en/vcprerelease/thread/11f01ceb-52a4-438f-b7ef-727ce7a3e191 concerning ATL projects.