I am working on a project which requires me to open an HTML file and use its contents. I added it to Resource files but when I try to open it lie this:
std::ifstream templateFile;
templateFile.open("filename.html", std::ifstream::in);
The operation fails. I checked it by using templateFile.fail().
The above operation works when I provide the full path. The file lies in the project folder along with other files. I tried setting build action to content but still it doesnt work. Please Help.
Output directory, where your executable is compiled and put into differs from the source directory, where you create all your .cpp/.hpp files (I assume there is filename.html file). Local path filename.html is supposed to be local for your executable file, not the source file.
Read more about changing the output directory here: https://msdn.microsoft.com/en-us/library/ms165410.aspx
Under Configuration Properties / Debugging, see what your Working Directory is using the macros dialog box. Move your file into this folder.
Click the button shown in the figure. There, click either Edit or Browse. Browse will take you to the working directory. Edit will expose the link to open the macros box
Related
I am working on a project where I have to read in serveral pre-existing CSV (dog.csv, horse.csv, etc.). I want to know how would I add these file into my project so that I may test to see if my print functions work (the code is written in c++). Would I have to copy and paste the files into the debugging folder or would I place it under the test folder of the project?
You can include the files in your project in whatever (sub)folder you wish by using Right click -> Add -> Existing Item. Then, right-click on each file and choose Properties. Set up "Copy to output directory" to "Copy if newer".
Then after build, your files will be copied into the bin/debug folder.
To read the file, you can just use:
System.IO.File.ReadAllText("dog.csv");
Another possible way is to add a file within project, right click and select properties, and then in Copy to Output Directory, select Copy always. This way, csv file will be automatically copied in your debug and release packages too.
string executableLocation = Path.GetDirectoryName(
Assembly.GetExecutingAssembly().Location);
string csvLocation= Path.Combine(executableLocation, "file.csv");
Above code will read file location from bin directory where your csv file will be stored.
This link should help guide you how to add CSV files to a project.
If you wanted to do a down and dirty way you could just save the CSV's somewhere on your local machine, and then hard code the file path to that location.
Example:
c:\test\Dog.csv and then set that as a variable for whenever you need to read in the csv file.
I'm trying to use fstream to create a file, however the file i'm trying to create wont appear in the .exe directory or anywhere else in the file directory. After searching in my computer for the file, I found that was created in a different directory entirely even though i'm using a relative directory.
This is the code to create the file:
ofstream file;
file.open("something.jpg", ios::out|ios::binary|ios::beg);
Directory of created file: C:\Users\user-pc
Directory of project: D:\Users\user-pc\Documents\Visual Studio 2012\Projects\recvFile
by the way, using an absolute directory works perfectly fine. Could this be a problem with the projects working directory?
In your Visual Studio right-click on your project, click Properties, then go to Configuration Properties, then Debugging. There is a row "Working Directory". You can set the working directory there. If you need to do this programmatically, you can use SetCurrentDirectory .
If you need to create the file in the same directory as the .exe location, you can use this approach: https://stackoverflow.com/a/124901/1915854
Call GetModuleFileName() using 0 as a module handle...
If the .exe is installed in a shared directory like Program Files, then creation of the file in the same directory could require additional permissions and may be a bad idea. If the .exe is just cloned to the directory where it should create files, then there is no such problem.
Try adding "../" to the link:
file.open("../something.jpg", ios::out|ios::binary|ios::beg);
File will be created in Debug/Release folder of your project. try what Timo Rzipa suggested.
I've been using windows in a class I've been taking but I am trying to run a basic code to figure out how to open/close/input/output from files on Xcode and the code I usually use on visual studios isn't working any idea why? thanks!
#include <string>
#include <iostream>
#include <fstream>
using namespace std;
int main()
{
ifstream fin;
ofstream fout;
string input;
fin.open("inputFile.txt");
if(fin.fail())
cout << "File failed to open." << endl;
fin >> input;
fout.open("outputFile.txt");
fout << input;
}
Put your .txt files in the same directory where your main.cpp file is (or anywhere you like).
In Xcode go to Product > Scheme > Edit Scheme > Run (on the left) > Options (middle top)
Down under Options for "Working Directory" check “Use custom working directory” and set it to the directory where you .txt files are located.
To work with the files, you will have to specify just file names, e.g. in_file.open("inputFile.txt"); no path is necessary.
Here's a completely different approach: Have Xcode copy the input file for you.
Select your project in Xcode
Select Build Phases
Click the '+' button to create a new Build Phase
Select New Copy Files Build Phase
Select Products Directory
Click the '+' button to add your file
Click Add Other
Select your input file and click Open
Check the Copy items… checkbox and click Finish
Now every time you build your project, the input file will be copied to the same folder as the executable no matter where it is built. Of course, to see the output file, you'll still need to find the executable in Finder.
The answers don't really explain the problem so I thought I'd do that.
When you pass a relative path like "inputFile.txt" to file APIs, it's treated as relative to the working directory when the program is executed. This is the same as the 'working directory' when you use cmd.exe or Terminal.app or command lines in general. The Unix command pwd ("print working directory") displays the current working directory. On Windows running the command cd with no arguments performs the same function. (On Unix running cd with no arguments will change the working directory to the user's home directory.)
When you run a program from the command line, the command line shell sets the program's working directory. When you run a program from within an IDE, the IDE sets the working directory. Since, unlike on a command line, there's no obvious answer for what the IDE should set as the working directory, Visual Studio and Xcode set the working directory to different locations by default: Visual Studio sets the working directory to $(ProjectDir), the directory containing the Visual Studio project file; Xcode sets the working directory to the build products directory, i.e. the location the executable was written to.
Some possible solutions to your problem are:
Do not use a relative path, and therefore don't depend on the working directory. This isn't much help in making the program more portable, because the absolute paths will also differ between platforms, and so you will still have to 'configure' the program for each platform. In fact using an absolute path is worse, because it means your source code must differ, whereas it would be better to keep that difference confined to each platform's build configuration.
Configure the IDE to use your desired working directory. Visual Studio can be configured by right clicking the project, selecting Configuration Properties > Debugging > Working Directory, and setting the working directory to the desired path (potentially using Visual Studio build variables).
nepete's answer describes how to configure the working directly set by Xcode.
Configure the IDE's build process to copy your data files to an appropriate location. In Visual Studio you would do this in a C++ project by configuring the project's Properties > Configuration Properties > Build Events.
SSteve's answer covers how to configure additional build steps in Xcode.
I'm guessing you have inputFile.txt in the folder that contains your source code. That's not going to work. You need to put it in the folder that contains the generated executable. To find that folder, right-click on your app under Products and select Show In Finder.
This image shows what it looks like for a command line program. It also shows the Finder window that was opened. As you can see, it is a different folder than the one containing the source code.
As suggested by nepete, edit the scheme, but use $PROJECT_DIR as the custom working directory. Helps with moving the project around, or working in two different environments (e.g., home and office).
BTW. $PROJECT_DIR is one of the Xcode Environment Variables, and also helps with passing file names as command line arguments to programs (settable under "Arguments" in the scheme).
I've struggled with the same problem today. I wanted to add C code to my Swift project and my file pointer was always NULL.
Unfortunately, in XCode 9 for iOS app, I couldn't change the working directory. Changing Build phases didn't help me either. After 4+ hours of trial and error, that's what I've come up with finally and it works:
when copying files to XCode, I've chosen "Create groups", but I needed to choose "Create folder references":
I created a new objective-c file (.m) and copied all my C code there.
I left untouched .h files (XCode generated bridging header and my own .h file with public functions declaration). Now my project structure looked like this:
In my dict.m file in place of previous plain c fopen part:
FILE *dic = fopen("dictionary.txt", "r");
I added obj-C code:
NSString *filePath = [[NSBundle mainBundle] pathForResource:#"dictionary" ofType:#"txt"];
FILE *dic = fopen([filePath cStringUsingEncoding: NSUTF8StringEncoding], "r");
And it works now without any problem! It's just amazing!
ps I decided to write this answer in case it will help someone like me and will save them some time. If you know how to change working directory in XCode 9 for iOS, please, leave me a comment - now I am really curious why I can't find it.
I was trying to #include a cpp file with some functions so I can use that cpp file later with other projects. It gave me an 'already defined in .obj' error and since then that .cpp file was like binded with my project. (I understood that's not the way, the answer here helped me with the already defined)
If I exclude the .cpp file from the project, remove it from the directory and remove the #include line it still looks for it:
c1xx : fatal error C1083: Cannot open source file: 'std.cpp': No such file or directory
Diagnostic:
Outputs for D:\MY DOCUMENTS\C#\PROJECT\D3DTESTC++\COWS AND BULLS\CBMAIN.CPP|D:\MY DOCUMENTS\C#\PROJECT\D3DTESTC++\COWS AND BULLS\STD.CPP: (TaskId:15)
It shouldn't be looking for the std.cpp at all, I removed it! So is there a way I can reset the project and recompile so that the program doesn't look for it? I already tried Rebuild and Clear -> Build Project
When I ran across a similar problem with VS Express, I wound up having to open up the the .vcxproj file (which is just XML), and remove the offending
< ClInclude Include="FILEPATHANDNAME" > tags.
Many of the solutions here will not work
Fullproof method:
Open the vxproj file that is giving you trouble in a text editor.
remove all references to the file it cannot find.
OK, I have no idea how I did it but I'm still going to try to write what I did.
Save all and Close solution
Open the .vcxproj file (not .sln)
Build -> Clean [Project Name]
Save all and Close
Open the .sln file again.
Build -> Project Only -> Clean Only [Project Name]
Build -> Project Only -> Build Only [Project Name]
That's exactly what I did and worked for me. I think the main thing to do is clean, save, close, open, build, but I'm not sure.
In Solution Explorer you can select/deselect option "Show All Files".
Try both options and make sure excluded file is not included in project for both of them.
That's what I had:
I used "Show All Files" option (so you can see all the files in project directories). I excluded one of my .cpp files from project. However, it behaved as this file is in project.
That's how I managed to fix it:
I switched "Show All Files" off and saw this file still belongs to project! So I excluded this file once again.
As I see, that's a known issue.
This worked for me, hope it will be useful for someone else.
Try to verbose builder output to see exact steps of what's going on. I suppose, you use Visual Studio, right?
Go to menu "Tools -> Options"
In options dialog, select "Projects and Solutions -> Build and Run"
Change current mode of "MSBuild project build output verbosity" from "Minimal" to something like "Diagnostics" or "Detailed".
Rebuild your project and investigate Output windows
Builder dump should shed more light on your current settings (I suspect you have more references to that file than you expect)
This happened to me because I renamed folder from inside the IDE. None of the above solutions worked. The only way to fix this is by opening vcproj in notepad and you should see the offending files in the <ItemGroup>. Just delete those lines.
Or sometimes, like in my case, the issue is simply in the naming of the folders in the location. I had a very long path with folders that I like to name with special characters so they show up at the top and it's easy to access them.
As soon as I put my solution in a folder just in D: drive, the issue was gone.
When I renamed a file, I found I had to go to SolutionExplorer, Source File, select the file, first exclude from Project, then re-add it to project, and rebuild the solution it lives in. It was still showing up as the old file name under Source Files for me.
I had the same problem, but I had another .sln worked fine. After tooling around with the Project->Properties-> to make them look identical, nothing worked. I opened both .vcxproj files and copied the contents of the working version into my non-working version. (I noticed that the two files had different lengths. The non-working version was longer by about 20 lines.) I just changed the RootNameSpace to the non-working version's name. I saved the non-working file and presto! It worked.
I removed those sources from Project and re-added them. Somehow, references were messed up after a hurry project refactoring.
For people having problem related to "error C1083: Cannot open source file":
Error is caused by settings in *.vcxproj file. Probably you deleted/moved source file by file explorer, not by Visual Studio's "Solution Explorer". Thus, your *.vcxproj file is corrupted. Fix is to manually correct settings in *.vcxproj file.
How Visual Studio settings files work
Visual Studio saves solution's info into file. This file is usually in project's solution directory, has extension .sln and base name is same as name of solution, f.ex.:
NameOfSolution.sln
Similarly, project's info is saved into one file (each project has its own file). Base name of this file is name of project, extension is .vcxproj, and usually is located in subdirectory named as your project, f.ex.:
NameOf1stProject/NameOf1stProject.vcxproj
NameOf2ndProject/NameOf2ndProject.vcxproj
Both *.sln and *.vcxproj files are textual files. You can open them by using Notepad.
How to fix problem
Find *.vcxproj file responsible for your project.
If you don't know where it is, open in Notepad the *.sln file of your solution. Search for name of your solution. You will find line like:
Project("{9AA9CEB8-8B4A-11D0-8D22-00B0C01AA943}") = "NameOf1stProject", "NameOf1stProject\NameOf1stProject.vcxproj", "{A8735D0A-25ED-4285-AB8F-AF578D8DB960}"
Value under "NameOf1stProject\NameOf1stProject.vcxproj" is location of *.vcxproj file of your project.
Open found *.vcxproj file by text editor (f.ex. Notepad).
Search for line on which is filename you are struggling with.
Example: if you are looking for "RemovedFile.cpp", then you should find line:
<ClCompile Include="RemovedFile.cpp" />
Delete that line.
If you have opened Visual Studio, it asks you if it should refresh solution - select yes. If it is not opened - just start using it.
In case of any problems, try to rebuild solution (top banner -> Build -> Rebuild Solution)
In my cases, it worked. 30 mins of trying to fix, <1 minute of fixing.
This helped in my case. To sum it up, my path to the project was too long, so I moved my project to something shorter i.e. D:\my_project and everything worked in a blink of an eye.
I had this same problem, but for me the issues was that I was using Bash on Windows (WSL) to clone the repository and then using VS to compile.
Once I deleted my clone and used Windows command line (cmd.exe) to clone the repo then the error 1083 went away.
This is caused by not removing/deleting the file properly. Go to Solution Explorer, select your solution, at the left corner, activate the icon: show all files.
(if you already removed the problem file, restore it from recycle bin)
Select the problem file, do remove and delete from within Solution Explorer and you should not have this problem. And remember to do it the proper way from now on.
This is on MS 2010
If you have that file in your project directory but you still got the error, on your IDE go to Solution explorer--> Remove that file-->then open the project directory on your file explorer-->Select that file and drop it on a specific location in IDE solution explorer. I fixed it this way. I use the Windows platform.
I got this error when I got a code from my peer and I tried directly running it on my system. Ideally to avoid such errors, I should have just copied the source and header files and should have created the VS solution of my own.
To resolve the errors I removed the files from the Solution Explorer and added them again. Following image shows the Solution Explorer window.
The remove option comes after right clicking on the file names.
I'm trying to learn some DirectX11 and I found good tutorial I'm following; however, for some reason the program crashes (The window appears but then a "not responding" message box appears), even though the build was successful. There were some thing about creating shader-files the author did specify on how to do, and i wanted to make sure I'm not making any errors there and that why my program crashes. So my questions are :
How do you create a shader files? In the tutorial we are using the extension .fx, but when you add a file in vs you can only choose from .h and .cpp . Do you only have to select .cpp and then add .fx in the end of the file name?
In what directory is the file suppose to be? (My files are currently in Source Files)
Yes that will work. Another way to do it is just to create a .txt then change the extention to .fx
(To show the file extention just open any folder, click on the organize button in the menu then choose "folder and search options". Uncheck the box "Hide extentions for know file types" under the tab view). After you change the extention you can open the document in notepad and write your code there
Go in to your project folder (in windows file system) and create a map called Data. Add you .fx file there. Then go to your solution explorer and rigth click on the project and choose properties. Go to Build Events -> Pre- Build Events. Add the line "xcopy /y /d "$(ProjectDir)Data" "$(OutDir)" in the box "Command Line". Now when building your project the files will be copied to the rigth place and you will be able to use your .fx file.
The .fx is associate it with an effect file. Meaning you have a combination of many shaders in the same file. Can you post some code of your render loop... also, are you calling the Present method?i.e.,
m_pSwapChain->Present(0, 0);