I made a laucher application in c++ that use direct 2d and 3d. Now i making a installer for this. I followed microsoft docs and i made it but there is a issue.
I use 'Microsoft Visual Studio Installer Projects' extension to make that.
The issue is if i already installed my launcher with a previous installer msi file, if i rebuilt a new installer msi and try to run it it show me this error
This is the microft docs i followed to make this: https://learn.microsoft.com/en-us/cpp/ide/walkthrough-deploying-your-program-cpp?view=msvc-160
In the future maybe i need make a update for my laucher. It isn't good idea everytime need go to control panel, search and delete the previous application and install the new one manually.
Anyone know how can i make it automatic remove old version and install new one? Maybe there is a better way to create a installer?
Major Upgrade: In order to upgrade properly, you need to use a major upgrade so that your new version uninstalls the old one and then installs itself (this can happen in reverse order too: new version installed and old remnants deleted afterwards, but this is another story). There are further upgrade types, but stick to major upgrades for simplicity.
The message you are receiving is basically because you have a different package code for the new MSI, but not a new product code or version number (or just one of those problems). You need to get the settings straight.
Recommended step-by-step:
Set "RemovePreviousVersions" to True in the project properties.
In the same place: bump up your version number (one of the first 3 digits)
Answer yes when asked to change product code, or do so yourself manually.
Keep the UpgradeCode the same - it needs to be stable across releases.
Rebuild your setups. Clean out your box of old remnants before testing or test on a virtual.
Testing: Remember to simulate your full upgrade process from first version installed to the new one with different version numbers for a few core files and also try to add a few files and such things. Very important to verify.
Heads-Up: Before ending, it is standard procedure to warn about the potential limitations of VSInstaller Projects (shorter list form).
MSI Tools: Here is a short "review" of other MSI tools.
MSI Upgrade Types: Shamelessly stolen from the InstallShield help file (towards bottom):
I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I'm trying to install iCloud on my Windows XP Pro (SP3) PC. Officially it's supported only for Vista and later, but this hack is widely claimed to work:
Open iCloudSetup.exe file and unzip its files including
Navigate to and open the iCloud.msi with Orca.
In the left table select LaunchCondition. Then change in the right table “VersionNT> = 600” to “VersionNT> = 200” and Save.
Run modified iCloud.msi and install.
Run iCloud Control Panel, located in the Windows Control Panel, and set up as you want.
I tried that promising solution in vain. It seemed to successfully install iCloud, but whenever I try to run it I get
this obscure error
After much fruitless searching I've not found out how to proceed from there and would appreciate advice please.
That trick worked with only the firs versions of iCloud Panel, the v1.0.
For the v2.1 doing the trick the installer ran ok, but when trying to run the iCloud Panel it showed the error you're refering to.
I had some computers running with that older version without any problem.
Try downloading the v1.0 version here:
http://icloud-control-panel-for-windows.uptodown.com/descargar/22412
If you want to try the trick with the v2.1 you have the installer here:
http://icloud-control-panel-for-windows.uptodown.com/
Remember you need to extract the MSI from the exe to do the trick. After running the exe check the %TEMP% folder to get the MSI file.
I am currently running Enthought Canopy version 1.5.2 full version, through an academic license at a 64bit Windows 7. I was a happy user for a couple months until a 'pythonw.exe has stopped working' issue rendered the software useless. This issue shows up when I open the editor (Ipython+Canopy's GUI) and does not allows me to use the software at all. I have tried the following solutions without luck:
Fresh install deleting several folders manually (https://support.enthought.com/hc/en-us/articles/204469700-Uninstalling-and-resetting-Canopy)
Fresh install+clearing python registry keys under hkeys_user and hkey_system and pythonw.exe related keys into windows regedit.exe (Problems in fully uninstalling Python 2.7 from Windows 7)
My second try actually gave me a false sense of victory, when Canopy worked for a couple hours, until the same issue happened taking all hope with it.
I don't know what to do anymore, any help would be much appreciated.
I had this problem also. And discovered it was due to my windows firewall blocking pythonw.exe
Either turn off the firewall. Or create exceptions for pythonw.exe (but be warned this files occurs in a few different directories. And I'm not sure which one gave the specific issue.
In the end I installed a new firewall (COMODO). And now everything works...
My Windows XP workstation at the office had several old versions of the Java JDK installed on it. Today I decided to install the newest Java JDK and uninstall the older ones. BIG MISTAKE APPARENTLY!
I don't understand why, but XP seems to think that one of the removed JDK installations is the one that it wants to use. Not sure if it is relevant, but it was JDK 1.6.0_13. I uninstalled it earlier using the XP "Add or Remove Programs" from the Control Panel. The JDK folder is gone (as one would expect) but apparently not forgotten. Here are the symptoms:
Eclipse will no longer start up and use the new JDK that I installed. Eclipse acts as if there is no JDK available on the system.
When I type java -version at a Command Prompt I get the following response:
Error: could not open `C:\jdk1.6.0_13\jre\lib\i386\jvm.cfg'
(Gee thanks. I never would have guessed that the uninstalled JDK could not be found...)
When searching around on the machine I found a system service named "Java Quick Starter" that is pointing to the removed JDK directory.
Now I know what some of you are probably thinking. He has a JAVA_HOME system variable pointing to the old location and/or has the old location in his PATH system variable. Not the case! There are no system variables that reference this old JDK and neither does my PATH. In fact, I have already defined a new JAVA_HOME for the new JDK that I installed this morning and added it to the system PATH. I was sure that would at least give me success from the Command Prompt, but no luck.
And in case you're wondering if I have rebooted after the install/uninstall/system variable changes, yes I have.
QUESTION
Does anyone know what I did wrong here? How do I purge these references to the uninstalled JDK from my system so it can start using the newly installed one?
EDIT 1
I checked the registry as duffymo suggested. There was some stuff under HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft that did not look right. An entry still existed for the 1.6.0_13 JDK that I had deleted, and a number of the newer JDK installs had entries here with their JavaHome attribute set to the path for the old 1.6.0_13 JDK for some inexplicable reason!
I uninstalled all of the JDKs on the machine, but still there is a remnant of the old 1.6.0_13 JDK in this registry section.
Also, a 1.6.0_21 JRE is still listed in the Add and Remove Programs list that gives an error if I try to uninstall it. That one is also shown in the registry and has a registry "JavaHome" key with a value that points to the no-longer-existing JDK 1.6.0_13.
Check the registry to see if something is hanging around there to point to the old JRE.
Look at HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft. You'll see Java Development Kit and Java Runtime Environment there. See what they say.
Now that you've found that the registry values are incorrect, I'd recommend either modifying them to point to the correct values OR remove them, uninstall the JDK, and reinstall.
You could also maybe try disabling the service from starting.
Copied from my repost of this quesiton on www.superuser.com:
https://superuser.com/questions/203143/cannot-install-java-jre-on-windows-xp-workstation-possibly-due-to-previous-faile
I tried CCleaner on the registry, but it didn't solve the problem. I was feeling pretty desperate at that point and decided to search the registry with regedt32 for instances of "jdk1.6.0" and delete everything that was obviously garbage. Any registry references to JDK/JRE instances that I knew no longer existed got deleted. Usually this meant deleting the whole key, but there were a few keys where I just had to delete an individual value/data pair. I rebooted after I was done performing meatball surgery on my poor defenceless registry.
DISCLAIMER: I don't recommend that anyone start messing with random keys in their registry as the primary way to solve a problem! This was my last resort before considering the option of re-imaging my workstation and re-installing EVERYTHING.
Having said that, this approach did solve my problem. I was able to install the JRE and then things like Eclipse started working normally once again. I next installed a JDK of the same version without incident.