I'm working on a Raspberry Pi 3 with OS Raspbian Jessie. I'm using Eclipse CDT (for C/C++) and am trying to learn about OpenFrameWorks:
http://openframeworks.cc/
I installed everything according to the guides and imported everything to Eclipse. I thought it seemed to work out, but when I try to run some test-code I get the error "Unable to launch, binary not found." I look it up and find a potential solution, that I have to build the actual project first.
This is my problem, when I try to build the project Eclipse gets to about 20% and then the entire Raspberry freezes, forcing me to force a restart. How can I continue from here on out? I don't know if I still should try to build the project through Eclipse or if there is another way to actually run some test code for OpenFrameWorks.
I don't know if this is the best place to ask about this, but I'm thankful for all answers.
Eclipse is super slow on Raspberry Pi.
I recommend using the provided setup scripts to install dependencies. After you compile OF, use make files to compile projects.
In terms of editing code, I recommend using a light weight text editor (geany for example). I've tried CodeBlocks and Qt Creator, which are faster/less resource intensive than eclipse, but still pretty heavy for a system with limited resources.
Another option is to combine your computer the RPi:
Use projectGenerator to generate a project for both Raspberry Pi and your computer/IDE
Edit/test/iterate on your computer
When ready to run on RPi, sync the project using your preferred method(e.g. SSH/SFTP/git/etc.), then use make -j4(to use all 4 cores) in the RPi project folder.
The pro is you the quick compile/feedback times you're used to on your computer.
The con is this method won't work for RPi specific code (e.g. accessing GPIO, PiCamera, etc.)
Another option is to setup cross compilation, but getting everything ready is a bit laborious. (Although, once it's done, it saves time on the long run).
I'm trying to start a work in vscode , latest C++ plugin version supports ms debugger, so as I'm mostly working under windows it was a signal to try this.
c++ tools plugin from MS and cmake tools were installed.
my test project was however not built . the problem is clear , but I need an advice from experienced vscode users how to solve this right.
cmake doesn't see vc compiler.
(after using QtCreator) I expected that vscode could detect vc installation... however that's not so. ok, I have a two ways:
fill environment variables INCLUDE/LIB/PATH with a headers, libs and binaries
just run vcvarsall.bat x64
Second way is a simple and reliable. so final question is:
how to run .bat at the begining of vscode start?
(I don't mean write another bat/cmd, prepare the environment and run vscode inside the same script after that)
Although the question is fairly old, I'll try to give a useful answer, in case others stumble across, just like I did.
I believe what you are trying to achieve is not possible. Code inherits the environment it was started with. If you did not launch it from a developer command prompt, you will not be able build and debug. (Building might be possible if every task first starts the vcvarsall.bat, but that slows things down by a lot. Debugging I think will still not work.)
If you are willing to, you can check out vector-of-bools CMake Tools extension which does build automation as well as automatic MSVC detection. It builds using CMake (thus you need to write your build scripts using CMake), but it will take care of building just by pressing F7, like what most VS users are familiar with.
I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I have a program I just finish writing in CFML (.cfm files) for my client, but I don't want my client to see the source code. I will install the software on his computer. I tried using the compile.bat but when I install it on the other computer, it gives an error (java language...). What are my options?
#Bardware is correct: the target machine needs to have the same major version of Java as that which you compiled the code with, and probably for good measure the minor version should be the same or greater.
You can - of course - confront this from the other direction: find out what version of Java they have running, and compile to that version. However they will still need to be running at least the minimum Java version that is supported for the intended version of ColdFusion.
Also it's vital to note #Bardware's comment against the question itself:
cfcompile.bat calls findjava.bat. There a variable JAVACMD is set.
Coldfusion prefers the JAVA that resides within the CF installation
folder. That is an issue, since CF came with JAVA 7 but might be set
to run with JAVA 8 in the jvm.config. You might resolve the variables
from the command afterdeploycompdir and compile without using the bat
file.
I developed a small c++ program in Visual Studio 2012 on Windows7, 64bit (let's call it PC1). On that pc it runs fine!
Since I didn't have a versioning control system like SVN at hand, I copied ALL the project data (the exact folder structure, DLLs, source files, project files...) to a usb stick and moved it to another computer.
On that other engine there's Visual Studio 2010 on Windows7, 64bit (PC2).
So I just changed the platform toolset to v100 as described here.
I successfully compiled the project on PC2 (clean, build) and wanted to run the exe, but the command prompt stayed empty.
I then tried to debug and added a breakpoint at the very first line of main - which wasn't reached, the command prompt was still empty.
Ok, a usb stick is certainly not the most secure solution for data storage, so I gave it another try and moved it again - the problem remains.
Visual Studio's output on PC2 is the same as on PC1, so I couldn't find any anomalies there.
Yeah, there might be many error sources, so where can I start?
And how can I get a more verbose output for troubleshooting?
Or is this even a common phenomenon (perhaps due to different VS versions) and there's an simple way fix it?
This is not a full solution, but at least I'm a tiny step ahead:
In my last comment I wrote:
I took your advices into account and created a brand new project on PC2, VS2010. I exactly followed this guide: http://frozenhamster.wordpress.com/2011/02/11/lapack-on-windows-with-visual-studion-2010/
That didn't work either, so I removed I "out-commented" everything except for a single cout. Voila, that worked!
But as soon as I make use of the desired Armadillo (LAPACK and BLAS), the project compils but does not run.
What's going wrong here?
I don't get any compiler errors!