I use Notepad++,
i need to search and replace entire word that contain a specific keyword.
Ex: someting HELP.blablabla.blabla someting
i would like to search entire text for words that contain the keyword "HELP" untill the first space OR the first comma.
In this case: HELP.blablabla.blabla
thanks a lot
Go to the search panel, check the regex checkbox on the bottom and try: (HELP)([^ ,]*)
Note: There are a space character after the ^
This regex means: Search for the entire word HELP (HELP) followed by anything that it isn't an space or an comma [^ ,] the ^ inside the brackets is a denial
Edit:
You can use just HELP[^ ,]* the parenthesis is just to create capturing groups if you need to use the specific groups to replace later. As pointed by #alphabravo
You say search and replace an entire word but if it were that simple then I wonder why a regular search and replace isn't sufficient. So I'm reading between the lines and assuming you want to match on full lines of text.
I think I've used npp enough to get the syntax right. I don't remember any eccentricities that would apply. Is the comma/space optional?
^[^, ]*HELP[^, ]*[, ]
I'm kinda thinking this one might be good enough:
^[^, ]*HELP
Related
I have a large text file which contains many timestamps. The timestamps look like this: 2013/11/14 06:52:38AM. I need to remove the last two characters (am/pm/AM/PM) from each of these. The problem is that a simple find and replace of "AM" may remove text from other parts of the file (which contains a lot of other text).
I have done a find using the regular expression (:\d\d[ap]m), which in the above example would track down the last bit of the timestamp: :38AM. I now need to replace this with :38, but I don't know how this is done (allowing for any combination of two digits after the colon).
Any help would be much appreciated.
EDIT: What I needed was to replace (:\d\d)[ap]m with \1
Make (:\d\d[ap]m) into (:\d\d)[ap]m and use $1 not \1
Go to Search > Replace menu (shortcut CTRL+H) and do the following:
Find what:
[0-9]{2}\K[AP]M
Replace:
[leave empty]
Select radio button "Regular Expression"
Then press Replace All
You can test it at regex101.
Note: the use of [0-9] is generally better than \d (read why), and avoiding to use a capture group $1 with the use of \K is considered better. It's definitely not important in your case, but it is good to know :)
Apologies in advance for the confusing title. My issue is as follows, I have the following text in about 600 files:
$_REQUEST['FOO']
I would like to replace it with the following:
$this->input->post('FOO')
To clarify, I am matching against the following:
$_REQUEST any number of A-Za-z\d followed by a ]
and replacing it with:
$this->input->post( the alphanumeric word from above followed by a )
Or in general:
Anchor token TEXT TO KEEP end anchor token
This differs from standard find/replace as I want to retain text inside of two word boundaries.
Is this functionality present in any text editors (Eclipse,np++,etc). Or am I going to need to write some type of program to parse these 600 files to make the replacement?
s/\$__REQUEST\[(.*?)]/$this->input->post(\1)/
The .*? will match everything from [ to the first ] rather than the last although it's unlikely that it will matter in this case.
By the way the PHP superglobal is $_REQUEST rather than $__REQUEST
You can do this in Notepad++ using regular expressions. Replace
\$_REQUEST\['([^']*)'\]
with
$this->input->post('$1')
If you ever have double-quotes too, you can do use a more complex expression to handle both cases, though I'm not sure Notepad++ supports backreferences; replace
\$_REQUEST\[(['"])(.*?)\1\]
with
$this->input->post($1$2$1)
Note that I've reverted to using #ExplosionPills' suggested (.*?) here—it may be better, actually.
I'm terrible at regex and need to remove everything from a large portion of text except for a certain variable declaration that occurs numerous times, id like to remove everything except for instances of mc_gross=anyint.
Generally we'd need to use "negative lookarounds" to find everything but a specified string. But these are fairly inefficient (although that's probably of little concern to you in this instance), and lookaround is not supported by all regex engines (not sure about notepad++, and even then probably depends on the version you're using).
If you're interested in learning about that approach, refer to How to negate specific word in regex?
But regardless, since you are using notepad++, I'd recommend selecting your target, then inverting the selection.
This will select each instance, allowing for optional white space either side of the '=' sign.
mc_gross\s*=\s*\d+
The following answer over on super user explains how to use bookmarks in notepad++ to achieve the "inverse selection":
https://superuser.com/questions/290247/how-to-delete-all-line-except-lines-containing-a-word-i-need
Substitute the regex they're using over there, with the one above.
You could do a regular expression replace of ^.*\b(mc_gross\s*=\s*\d+)\b.*$ with \1. That will remove everything other than the wanted text on each line. Note that on lines where the wanted text occurs two or more times, only one occurrence will be retained. In the search the ^.*\b matches from start-of-line to a word boundary before the wanted text; the \b.*$ matches everything from a word boundary after the wanted text until end of line; the round brackets capture the wanted text for the replacement text. If text such as abcmc_gross=13def should be matched and retained as mc_gross=13 then delete the \bs from the search.
To remove unwanted lines do a regular expression search for ^mc_gross\s*=\s*\d+$ from the Mark tab, tick Bookmark line and click Mark all. Then use Menu => Search => Bookmark => Remove unmarked lines.
Find what: [\s\S]*?(mc_gross=\d+|\Z)
Replace with: \1
Position the cursor at the start of the text then Replace All.
Add word boundaries \b around mc_gross=\d+ if you think it's necessary.
I’m working with a text file with 200.000+ lines in Notepad++. Each line has only one word. I need to strip out and remove all words which only contains one letter (e.g.: I) and words which contains only two letters (e.g.: as).
I thought I could just pas in regular regex like this [a-zA-Z]{1,2} but I does not recognize anything (I’m trying to Mark them).
I’ve done manual search and I know that there do exists words of that length so therefor can it only be my regex code that’s wrong. Anyone knows how to do this in Notepad++ ???
Cheers,
- Mestika
If you want to remove only the words but leave the lines empty, this works:
^[a-zA-Z]{1,2}$
Replace this with an empty string. ^ and $ are anchors for the beginning and the end of a line (because Notepad++'s regexes work in multi-line mode).
If you want to remove the lines completely, search for this:
^[a-zA-Z]{1,2}\r\n
And replace with an empty string. However, this won't work before Notepad++ 6, so make sure yours is up-to-date.
Note that you will have to replace \r\n with the specific line-endings of your file!
As Tim Pietzker suggested, a platform independent solution that also removes empty lines would be:
^[a-zA-Z]{1,2}[\r\n]+
A platform-independent solution that does not remove empty lines but only those with one or two letters would be:
^[a-zA-Z]{1,2}(\r\n?|\n)
I don't use Notepad++ but my guess is it could be because you have too many matches - try including word boundaries (your exp will match every set of 2 letters)
\b[a-zA-Z]{1,2}\b
The regex you specified should find 1-or-2 characters (even in Notepad++'s Find-dialog), but not in the way you'd think. You want to have the regex make sure it starts at the beginning of the line and ends at the end with ^ and $, respecitevely:
^[a-zA-Z]{1,2}$
Notepad++ version 6.0 introduced the PCRE engine, so if this doesn't work in your current version try updating to the most recent.
You seem to use the version of Notepad++ that doesn't support explicit quantifiers: that's why there's no match at all (as { and } are treated as literals, not special symbols).
The solution is to use their somewhat more lengthy replacement:
\w\w?
... but that's only part of the story, as this regex will match any symbol, and not just short words. To do that, you need something like this:
^\w\w?$
I got a string like this:
PREFIX-('STRING WITH SPACES TO REPLACE')
and i need this:
PREFIX-('STRING_WITH_SPACES_TO_REPLACE')
I'm using Notepad++ for the Regex Search and Replace, but i'm shure every other Editor capable of regex replacements can do it to.
I'm using:
PREFIX-\('(.*)(\s)(.*)'\)
for search and
PREFIX-('\1_\3')
for replace
but that replaces only one space from the string.
The regex search feature in Notepad++ is very, very weak. The only way I can see to do this in NPP is to manually select the part of the text you want to work on, then do a standard find/replace with the In selection box checked.
Alternatively, you can run the document through an external script, or you can get a better editor. EditPad Pro has the best regex support I've ever seen in an editor. It's not free, but it's worth paying for. In EPP all I had to do was this:
search: ((?:PREFIX-\('|\G)[^\s']+)\s+
replace: $1_
EDIT: \G matches the position where the previous match ended, or the beginning of the input if there was no previous match. In other words, the first time you apply the regex, \G acts like \A. You can prevent that by adding a negative lookahead, like so:
((?:PREFIX-\('|(?!\A)\G)[^\s']+)\s+
If you want to prevent a match at the very beginning of the text no matter what it starts with, you can move the lookahead outside the group:
(?!\A)((?:PREFIX-\('|\G)[^\s']+)\s+
And, just in case you were wondering, a lookbehind will work just as well as a lookahead:
((?:PREFIX-\('|(?<!\A)\G)[^\s']+)\s+
You have to keep matching from the beggining of the string untill you can match no more.
find /(PREFIX-\('[^\s']*)\s([^']*'\))/
replace $1_$2
like: while (/(PREFIX-\('[^\s']*)\s([^']*'\))/$1_$2/) {}
How about using Replace all for about 20 times? Or until you're sure no string contains more spaces
Due to nature of regex, it's not possible to do this in one step by normal regular expression.
But if I be in your place, I do such replaces in several steps:
find such patterns and mark them with special character
(Like replacing STRING WITH SPACES TO REPLACE with #STRING WITH SPACES TO REPLACE#
Replace #([^#\s]*)\s to #\1_ server times.
Remove markers!
I studied a little the regex tool in Notepad++ because I didn't know their possibilities.
I conclude that they aren't powerful enough to do what you want.
Your are obliged to learn and use a programming language having a real regex capability. There are a number of them. Personnaly, I use Python. It would take 1 mn to do what you want with it
You'd have to run the replace several times for each space but this regex will work
/(?<=PREFIX-\(')([^\s]+)\s+/g
Replace with
\1_ or $1_
See it working at http://refiddle.com/10z