I'm trying to build my application for J2ME using the Codename One build server. This has been working fine, but now I get a build error every time. Here's an extract from the log, which mentions a StackOoverflowError while preparing the output jar:
Preparing output jar [/tmp/build8143824389622734358xxx/result/MyApplication.jar]
Copying resources from program directory [/tmp/build8143824389622734358xxx/tmpclasses]
Exception: java.lang.StackOverflowError
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
com.codename1.build.daemon.Executor.unzip(Executor.java:904)
That last line then repeats another 1023 times, all the way to the end of the file.
I've rewound my source to a version that I have built before and that now fails too, with the same error message.
Could this be something that's changed in my development environment, or is this an issue with the build server?
Any help would be much appreciated. Thanks a lot,
Paul
There was a temporary issue with some iOS builds. It was resolved in an hour.
Related
I get the following error:
Exception occurred executing command line.
Cannot run program "C:/OMNEST-5.5.1/samples/enera/lteAdvanced/enera.exe" (in directory "C:\OMNEST-5.5.1\samples\enera\lte"): CreateProcess error=2, The System cannot find the file.
I already built the project many times. I have tried to make a simplier already given example from omnet just to check if this is working. It is working. But if I copy this example in my Project it also doesn't work, so there is sth wrong with my Project file. But it seems to be correct. I just have one Connection and kept it really really simple. But it doesn't work. I have installed Omnest and inet correctly.
The most likely cause is that the EXE file cannot find the omnet++ dynamic libraries it tries the load. And the most likely reason is that you are trying to execute the executable from a CMD prompt instead of from the shell provided by the mingwenv.cmd script.
Everything you do in OMNeT++ (including starting the simulations) must be run from the mingwenv shell.
Hi, I try to embed mono in a c++ application on windows. I followed http://www.mono-project.com/docs/compiling-mono/windows/ and I have my headers, lib and dll built for win64.
I wrote a simple app that just calls
MonoDomain *domain;
domain = mono_jit_init("ConsoleApplication1.exe");
Everything builds and link find but when I run my program, I can break and step until the mono_jit_init call. Then the apps performs an exit1 and I can't see what's wrong.
I tried both release and debug.
Any ideas on how to find the issue? Properly embed mono?
Thanks, JNQ
Your application probably fails on loading Mono libraries.
You can use Process Monitor (https://learn.microsoft.com/en-us/sysinternals/downloads/procmon) to find out what exactly fails for you:
Run Process Monitor
Set Process Monitor filter to "[Process Name] [is] [Your process name, e.g. ConsoleApplication1.exe] then [Include]"
Run you program and lookup for "CreateFile" operations with "NAME NOT FOUND" Result and see Path column to find out what file is missing
In my case it was a failure on loading mono mscorlib.dll from lib\mono\4.5\mscorlib.dll so copying the files from the Mono installation to the path pointed by Process Monitor has helped.
Another error at startup of my basic app which only tests my DLL (the core deliverable of my project) by calling its init method. I have analysed what happens using Process Monitor, and filtered according to process name, looking only for events related with my the main executable of my basic app.
What should I be looking for there ? I guess anything that says SUCCESS in the result column does not point to the problem - but what about the rest ? It seems to be looking for my DLL all over the world although it first tried in the current directory and found it there already ...
An excerpt here, saved from ProcMon in CSV format : http://pastebin.com/YHSeQUk0
As I said it tries to open my DLL in many places (following my PATH environment variable ?). When looking for it in the correct folder (which is the same as where the exe is located and running) it goes through a series of actions which mostly end up in SUCCESS (if not otherwise specified):
IRP_MJ_CREATE
IRP_MJ_CLEANUP
IRP_MJ_CLOSE
IRP_MJ_CREATE
FASTIO_ACQUIRE_FOR_SECTION_SYNCHRONIZATION (result is : FILE LOCKED
WITH ONLY READERS)
FASTIO_ACQUIRE_FOR_CC_FLUSH
FASTIO_ACQUIRE_FOR_SECTION_SYNCHRONIZATION (result is SUCCESS)
FASTIO_ACQUIRE_FOR_CC_FLUSH
It does all of this a second time later. To me this looks ok. No other DLL-related event show up.
There is this other event at the top :
RegOpenKey in HKLM\System\CurrentControlSet\Control\Srp\GP\DLL which first results in REPARSE and then in NAME NOT FOUND. But many things happen afterwards, this doesn't look like a blocking point - and anyhow no clue what this is about.
dumpbin /dependents ConsoleApplication1.exe yields the following :
File Type: EXECUTABLE IMAGE
Image has the following dependencies:
uss_map_interface.dll
VCRUNTIME140.dll
api-ms-win-crt-runtime-l1-1-0.dll
api-ms-win-crt-math-l1-1-0.dll
api-ms-win-crt-stdio-l1-1-0.dll
api-ms-win-crt-locale-l1-1-0.dll
api-ms-win-crt-heap-l1-1-0.dll
KERNEL32.dll
The first one is my dll. If I remove it the message at startup turns into "uss_map_interface.dll is missing from your computer" - so I cannot believe this woukld be related to my DLL ... all the other I found in Windows/System32 or SysWOW64.
I am compiling both my DLL and the test basic app with MVS Express 2015 (v140) with x64 configs. The problem also appears if I change to x86 configs. The funny thing also is that if I compile my DLL with MinGW in a Qt project - it works fine. If that can provide a hint, here follow the dependencies of the Qz/MinGW-compiled version :
File Type: DLL
Image has the following dependencies:
libgcc_s_dw2-1.dll
KERNEL32.dll
msvcrt.dll
libstdc++-6.dll
Anyhow, thanks in advance !
I am getting an error:
"Error occurred during initialization of VM
Unable to load native library: Can't find dependent libraries"
The error arises when I try to execute my exe file.
I have created exe file through pyinstaller on a django application. Application uses pylucine library. I think it may be the issue of error.
How to fix the error?
Since I can't be certain given you've provided very few details here is a shot in the dark to help solve your problem:
First, try removing the jvm.dll file that gets packaged with the pyinstaller -D youmodule.py command (for now work with the directory command rather than -F option). The reason why is here.
With that jvm.dll file gone, you should start seeing the actual error code - and with that the java class or dependency that isn't being loaded.
If it's a java class that isn't being properly loaded then you know instantly it must not be correcly represented in the classpath environment variable and you should do everything in your power to make sure it is:
e.g.: os.environ['CLASSPATH'] += 'the/path/to/the/jar'
Otherwise, consider bulking up your question with more details, especially if you can get a more meaningful error output.
I had the same error trying to run a .exe built with PyInstaller through wine.
My problem went away by adding C:\Program Files\Java\ [your jdk version here] \jre\bin\server to the PATH environment variable in wine - I suppose it might be the same in Windows.
It also reappeared if I tried to build with C:\Program Files\Java\ [your jdk version here] \jre\bin\server in my PATH, so I had to build without it and then append it before running it (I have no explanation as to why this happens).
I have started getting the following all of a sudden and am not able to build and deploy my application all of a sudden.. Not able to figure out what caused this to start happening.
Error:
[2013-08-13 12:21:41]FWLST1040E: common build failed: Failed to update main HTML file 'C:\Users\ajay\AppData\Local\Temp\worklightBuildcommon8499642247565272374\preview\default\myapp.html'
[2013-08-13 12:21:41] Application 'mypp' with all environments build finished.
[2013-08-13 12:21:41] FWLST1035I: No environments to build.
The build and deploy is not working and I am not able to update the app in the simulator.. Has any one else faced this before?
#idan thanks for the answer. There is no /worklightBuildcommon* folder in temp.
But I found the problem.. It was a malformed HTML that was causing this error.. the HTML validator that runs never caught it - the fact that its giving a build error was misleading me to believe its a build time problem v/s bad html..
I cracked it by creating a new dummy app in the same project and just replacing the artifacts one at a time.. started with tht html first and hit the jackpot!
Navigate to C:\Users\ajay\AppData\Local\Temp\
delete the folder worklightBuildcommon8499642247565272374