I'm evaluating WSO2 Identity Server 5.0.0 but I'm getting a strange issue using the dashboard.
I installed it on a server of mine (so it is not on localhost) and configured the following configuration files so that WSO2 knows where to point
File wso2is-5.0.0/repository/conf/carbon.xml
<HostName>SERVER_IP</HostName>
<MgtHostName>SERVER_IP</MgtHostName>
File wso2is-5.0.0/repository/conf/security/saml2.federation.properties
WSO2=https://SERVER_IP:9445/samlsso
File wso2is-5.0.0/repository/conf/security/sso-idp-config.xml
<SSOIdentityProviderConfig>
<ServiceProviders>
<ServiceProvider>
<Issuer>wso2.my.dashboard</Issuer>
<AssertionConsumerService>https://SERVER_IP:9443/dashboard/acs</AssertionConsumerService>
...
As stated in the official documentation I should see some blocks and after clicking the "View details" buttons I should be able to do the operations of the dashboard related to each block.
However, when I login in the Dashboard I can see the blocks, but when I click "View details" I get a blank-content page a you can see in the following screenshot of the "My Profiles" page
The same thing happens for the other blocks.
What can I do? Maybe I didn't configure something?
Thank you in advance
Giulio
If you have installed the identity server other than localhost, You would see some issues with dashboard. I also experienced same type of issues. But you can resolve them by configuring the host name and port properly. Unfortunately there are few places that you need to edit. Please find them below. I have already to report a jira to improve them to configure from one config file.
repository/conf/carbon.xml
repository/conf/security/sso-idp-config.xml
repository/deployment/server/jaggeryapps/dashboard/apis/gadget.json
repository/deployment/server/jaggeryapps/portal/gadgets/account-recovery/gadget.xml
repository/deployment/server/jaggeryapps/portal/gadgets/identity_management/gadget.xml
repository/deployment/server/jaggeryapps/portal/gadgets/pwd_change/gadget.xml
repository/deployment/server/jaggeryapps/portal/gadgets/user_auth_apps/gadget.xml
repository/deployment/server/jaggeryapps/portal/gadgets/user_profile/gadget.xml
modify the url of the user_profile (i.e. http://{IP}:{port}/portal/gadgets/user_profile/gadget.xml ) in "repository/deployment/server/jaggeryapps/dashboard/apis/gadget.json" file in to HTTP and Port in to 9763.
Related
i was trying to integrate zoho email with my opencart website,as my hostgator team suggested,to point to the domain first,so it was already did,so i deleted an old one and point again to zoho,and after that pointing thing,my payumoneys stop working.
i am really sure,that i didnt delete anyfile from anywhere,but still got internal server error,i dont get it why is this happening,this is my first time to integrate payment gateway with opencart,somebody please give me some,solution for this.enter image description here
It sounds like you've switched your mail settings in OpenCart from "mail" to "SMTP" and tried to configure Zoho?
If the SMTP settings are wrong it could throw an error at the checkout and if your server is not configured to display errors these will appear in the error log only - not on the page.
You should try switching back to "mail" to see if that solves the issue and that would then confirm the above diagnosis.
For the past 12 or so hours when I go here:
https://console.developers.google.com/apis/credentials?project=MYPROJECTNAME
I just get the spinning / loading animation. I have tried other browsers and other computers to no avail. I just need to add another OATH key. Is the service somehow broken? Is there something else I can do?
The browser shows some errors.
Refused to display 'https://apikeys.clients6.google.com/static/proxy.html?usegapi=1&js [ stuff deleted] in a frame because it set 'X-Frame-Options' to 'sameorigin'.
and a few 404s
cloudusersettings-pa.clients6.google.com/v1alpha1/settings/PAN_NOTIFICATION_BELL_LAST_OPENED?key=[deleted]:1 Failed to load resource: the server responded with a status of 404 ()
like it's able to load the front end but not access the data it needs.
Sounds like it's a Google issue, just got a response back from Google:
Description:
We are experiencing elevated latency in the API Credentials page of Google
Developers Console beginning at 2019-02-09 20:06 PST.
We are using the external issue tracker as the main communication channel
to provide updates on this issue. Please star the issue here to receive
further updates: https://issuetracker.google.com/124188941.
This Issue Tracker entry is the authoritative source for public information
regarding this issue. All publicly-applicable updates will be posted there.
How to diagnose:
1. Visit Google Developers Console.
2. Select "APIs & Services".
3. Select "Credentials".
Result: Credentials page will continuously load.
Workaround:
There's no workaround available at this time, but we'll let you know via
the external issue tracker (https://issuetracker.google.com/124188941) if
we learn of one.
I'm getting blank pages when navigating the WSO2 ESB-4.9.0 management console. For example, the registry, templates, endpoints, and local entries pages are all blank when navigating to them in the console UI.
I've found the following errors in the logs:
Error during rendering
IO Error executing tag: JSPException while including path '/templates/list_templates.jsp'. ServletException while including page.
The ESB is running in a YAJSW Windows Service. I should note that the ESB runs fine when running straight from the command line, it's just when using the service wrapper.
Strainy
Since you mentioned that the ESB starts as a window service, in carbon 4.4.x, default wrapper.conf file needs to be updated with following additional entries.
wrapper.java.additional.26 = -Dwso2.carbon.xml=${carbon_home}\\repository\\conf\\carbon.xml
wrapper.java.additional.27 = -Dwso2.registry.xml=${carbon_home}\\repository\\conf\\registry.xml
wrapper.java.additional.28 = -Dwso2.user.mgt.xml=${carbon_home}\\repository\\conf\\user-mgt.xml
wrapper.java.additional.29 = -Dwso2.transports.xml=${carbon_home}\\repository\\conf\\mgt-transports.xml
wrapper.java.additional.31 = -Dorg.apache.jasper.compiler.Parser.STRICT_QUOTE_ESCAPING=false
wrapper.java.additional.33 = -Dfile.encoding=UTF8
You can verify these configurations in wrapper.conf and these configurations may help you to solve the jsp error.
Following link may help you if you need more information regarding this.
https://docs.wso2.com/display/ESB490/Installing+as+a+Windows+Service#InstallingasaWindowsService-SettinguptheYAJSWwrapperconfigurationfile
I just used the NSSM - the "Non-Sucking Service Manager".
It's actually amazingly simple to install a Service using this tool.
https://nssm.cc
Just set it up to point at the wso2server.bat file
Keeping an eye on this issue however: https://wso2.org/jira/browse/ESBJAVA-4342
I just installed ColdFusion 11 on a Windows 2008 server. After installation, I got the message to proceed with configuration using the link
http://foo.com:80/CFIDE/administrator/index.cfm
where foo.com is 127.0.0.1
However, it keeps rejecting the userid and password I provided during installation for administrator.
Any help is highly appreciated.
This blog entry should help you: Troubleshooting ColdFusion Admin Login Issues.
You can also try the following quick workarounds:
Try an alternate browser (issue primarily occurs with IE).
Try alternative address
http://127.0.0.1:port_no/CFIDE/administrator/index.cfm or
http://localhost:port_no/CFIDE/administrator/index.cfm or
http://ip:port_no/CFIDE/administrator/index.cfm.
Try the passwordreset.bat and then try with the same ip or loopbak ip
address.
Enable internal/built port for ColdFusion and then try
http://localhost:8500/CFIDE/administrator/index.cfm, where 8500 is
the internal port for ColdFusion.
Note: Enabling internal/built port would require a ColdFusion Application Server restart.
This is usually due to reasons posted here - https://forums.adobe.com/message/6502639#6502639
The issue is happening because of mime type (.air) entry specified in the web.config of the webroot.
Can you try the following steps:-
Navigate to the webroot of your site.
Take a backup of web.config and open it with text editor (notepad etc)
Comment the entry for mimeType extension of ".air" like <!--<mimeMap fileExtension=".air"
mimeType="application/vnd.adobe.air-application-installer-package+zip"
/>-->
Save the file and restart IIS.
Launch CF Admin and try to login.
Commenting out the .air type in site specific web.config file has resolved the issue.
using the OpenCMIS Workbench 0.8.0, I can load the sharepoint 2013 (GA) repositories fine but get the following error when I try to login to one of the repositories such as Documents:
"Invalid Argument: One or more of the input parameters to the service method is missing or invalid"
Found a blog with some instructions but those didn't work for me:
http://dhartford.blogspot.com/2013/01/sharepoint-2013-w-apache-chemistry-cmis.html?showComment=1359398536275#c6910049622927723676
Note: Here is the service url format that I am using:
http://myserver.xxx.com/MYSITE/cmis/_vti_bin/cmis/rest?getRepositories
Does anybody know what the problem is?
Here is the stack trace from Workbench:
> 11:05:17 DEBUG ncmis.client.bindings.spi.http.HttpUtils: GET http://MYServer/_vti_bin/cmis/rest/f8134afe-176a-4c48-9fd2-a9f97e5dc91d?getTypeDefinition&typeId=cmis%3Adocument
> 11:05:17 TRACE ncmis.client.bindings.spi.http.HttpUtils: GET http://MYServer/_vti_bin/cmis/rest/f8134afe-176a-4c48-9fd2-a9f97e5dc91d?getTypeDefinition&typeId=cmis%3Adocument > Headers: {null=[HTTP/1.1 400 One or more of the input parameters to the service method is missing or invalid.], Server=[Microsoft-IIS/7.5], SPRequestDuration=[124], SPIisLatency=[27], X-FRAME-OPTIONS=[SAMEORIGIN], Content-Type=[plain/text; charset=utf-8], Date=[Wed, 30 Jan 2013 19:05:02 GMT], X-SharePointHealthScore=[1], Cache-Control=[private], X-Content-Type-Options=[nosniff], X-Powered-By=[ASP.NET], X-MS-InvokeApp=[1; RequireReadOnly], request-id=[5ef0f99b-24ec-909f-6192-6eaf6feccabc], Content-Length=[167], MicrosoftSharePointTeamServices=[15.0.0.4420], SPRequestGuid=[5ef0f99b-24ec-909f-6192-6eaf6feccabc], X-AspNet-Version=[4.0.30319]}
> 11:05:17 ERROR hemistry.opencmis.workbench.ClientHelper: CmisInvalidArgumentException: One or more of the input parameters to the service method is missing or invalid.
org.apache.chemistry.opencmis.commons.exceptions.CmisInvalidArgumentException: One or more of the input parameters to the service method is missing or invalid.
at org.apache.chemistry.opencmis.client.bindings.spi.atompub.AbstractAtomPubService.convertStatusCode(AbstractAtomPubService.java:423)
at org.apache.chemistry.opencmis.client.bindings.spi.atompub.AbstractAtomPubService.read(AbstractAtomPubService.java:554)
at org.apache.chemistry.opencmis.client.bindings.spi.atompub.AbstractAtomPubService.getTypeDefinitionInternal(AbstractAtomPubService.java:821)
at org.apache.chemistry.opencmis.client.bindings.spi.atompub.RepositoryServiceImpl.getTypeDefinition(RepositoryServiceImpl.java:88)
at org.apache.chemistry.opencmis.client.bindings.impl.RepositoryServiceImpl.getTypeDefinition(RepositoryServiceImpl.java:137)
at org.apache.chemistry.opencmis.client.runtime.SessionImpl.getTypeDefinition(SessionImpl.java:518)
at org.apache.chemistry.opencmis.workbench.model.ClientSession.createOperationContexts(ClientSession.java:244)
at org.apache.chemistry.opencmis.workbench.model.ClientSession.createSession(ClientSession.java:195)
at org.apache.chemistry.opencmis.workbench.LoginDialog$2.actionPerformed(LoginDialog.java:204)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2006)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2329)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:398)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:253)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:247)
> 11:05:17 ERROR hemistry.opencmis.workbench.ClientHelper: Error code: 0
Another thing that I noticed is that none of the URLs from the service document work when I use them from a browser. So i think the service doc doesn't have valid urls.
Give the latest CMIS Workbench a try:
https://repository.apache.org/content/repositories/orgapachechemistry-166/org/apache/chemistry/opencmis/chemistry-opencmis-workbench/0.9.0-beta-1/chemistry-opencmis-workbench-0.9.0-beta-1-full.zip
Didn't have the time to post the solution but here is basically what I had to do after getting help from Microsoft. I was missing Step B below:
A. Activate the CMIS feature for your sub site
Go to the Sharepoint 2013 Central Administration
Click on the Sites link and then click on your sub site. Or navigate directly to it. eg http://myserver/mysitename
Click on the Settings icon (gear top right) and then select Site Settings
Under Site Actions, click Manage Site Features
Click Activate for the CMIS producer.
B. Check Alternate Access Mappings
Go to the Central Administration page
Under System Settings, click Configure Alternate Access Mappings
There should be at least two urls. One with server short name and one with server full name.
If the url is missing, click Add Internal Urls
For the Alternate Access Mapping Collection, click the No Selection link, change and select:
SharePoint - 80
Set the url such as http://myserver.usa.com (full domain name)
Set Zone: any such as Intranet
Click Save
My suggestion would be to:
start the Workbench, do not login yet
close the connection popup
open the Log window with the button on the top right corner
increase the log level to DEBUG or more verbose
try to connect
check the logs again, possibly posting them here
The actual root of the problem turned out to be a missing Alternate Access Mapping. Not sure why it was missing in the first place.
So I added an internal url that has the full server name address instead of just the short name. A microsoft dev helped me figure this out.
Remove any proxy settings from internet explorer before you launch OpenCMIS, also reset any system wide proxy settings: netsh winhttp reset proxy
Make sure your share point web app is set to accept only basic authentication as described in the blog post you mentioned
Removing the proxy from IE and system wide fixed my problem .. I can now login to sharepoint 2013 using OpenCMIS
ah before i forget the URL syntax should be http://server:port/_vti_bin/cmis/rest/?getRepositories
Good luck