I would like to remove everything after the 2nd occurrence of a particular
pattern in a string. What is the best way to do it in Unix? What is most elegant and simple method to achieve this; sed, awk or just unix commands like cut?
My input would be
After-u-math-how-however
Output should be
After-u
Everything after the 2nd - should be stripped out. The regex should also match
zero occurrences of the pattern, so zero or one occurrence should be ignored and
from the 2nd occurrence everything should be removed.
So if the input is as follows
After
Output should be
After
Something like this would do it.
echo "After-u-math-how-however" | cut -f1,2 -d'-'
This will split up (cut) the string into fields, using a dash (-) as the delimiter. Once the string has been split into fields, cut will print the 1st and 2nd fields.
This might work for you (GNU sed):
sed 's/-[^-]*//2g' file
You could use the following regex to select what you want:
^[^-]*-\?[^-]*
For example:
echo "After-u-math-how-however" | grep -o "^[^-]*-\?[^-]*"
Results:
After-u
#EvanPurkisher's cut -f1,2 -d'-' solution is IMHO the best one but since you asked about sed and awk:
With GNU sed for -r
$ echo "After-u-math-how-however" | sed -r 's/([^-]+-[^-]*).*/\1/'
After-u
With GNU awk for gensub():
$ echo "After-u-math-how-however" | awk '{$0=gensub(/([^-]+-[^-]*).*/,"\\1","")}1'
After-u
Can be done with non-GNU sed using \( and *, and with non-GNU awk using match() and substr() if necessary.
awk -F - '{print $1 (NF>1? FS $2 : "")}' <<<'After-u-math-how-however'
Split the line into fields based on field separator - (option spec. -F -) - accessible as special variable FS inside the awk program.
Always print the 1st field (print $1), followed by:
If there's more than 1 field (NF>1), append FS (i.e., -) and the 2nd field ($2)
Otherwise: append "", i.e.: effectively only print the 1st field (which in itself may be empty, if the input is empty).
This can be done in pure bash (which means no fork, no external process). Read into an array split on '-', then slice the array:
$ IFS=-
$ read -ra val <<< After-u-math-how-however
$ echo "${val[*]}"
After-u-math-how-however
$ echo "${val[*]:0:2}"
After-u
awk '$0 = $2 ? $1 FS $2 : $1' FS=-
Result
After-u
After
This will do it in awk:
echo "After" | awk -F "-" '{printf "%s",$1; for (i=2; i<=2; i++) printf"-%s",$i}'
Related
I have a text file, and I'm trying to get an array of strings containing between $..$ delimiters (LaTeX formulas) using bash script. My current code doesn't work, result is empty:
#!/bin/bash
array=($(grep -o '\$([^\$]*)\$' test.txt))
echo ${array[#]}
I tested this regex here, it finds the matches. I use the following test string:
b5f1e7$bfc2439c621353$d1ce0$629f$b8b5
Expected result is
bfc2439c621353 629f
But echo returns empty. Although if I use '[0-9]\+' it works:
5 1 7 2439 621353 1 0 629 8 5
What do I do wrong?
How about:
grep -o '\$[^$]*\$' test.txt | tr -d '$'
This is basically performing your original grep (but without the brackets, which were causing it to not match), then removing the first/last characters from each match.
You may use awk with input field separator as $:
s='b5f1e7$bfc2439c621353$d1ce0$629f$b8b5'
awk -F '$' '{for (i=2; i<=NF; i+=2) print $i}' <<< "$s"
Note that this awk command doesn't validate input. If you want awk to allow for only valid inputs then you may use this gnu awk command with FPAT:
awk -v FPAT='\\$[^$]*\\$' '{for (i=1; i<=NF; i++) {gsub(/\$/, "", $i); print $i}}' <<< "$s"
bfc2439c621353
629f
What about this?
grep -Eo '\$[^$]+\$' a.txt | sed 's/\$//g'
I'm using sed to replace the $.
Try escaping your braces:
tst> grep -o '\$\([^\$]*\)\$' test.txt
$bfc2439c621353$
$629f$
of course, you then have to strip out the $ signs (-o prints the entire match). You can try sed instead:
tst> sed 's/[^\$]*\$\([^\$]*\)\$[^\$]*/\1\n/g' test.txt
bfc2439c621353
629f
Why is your expected output given b5f1e7$bfc2439c621353$d1ce0$629f$b8b5 the two elements bfc2439c621353 629f rather than the three elements bfc2439c621353 d1ce0 629f?
Here's a single grep command to extract those:
$ grep -Po '\$\K[^\$]*(?=\$)' <<<'b5f1e7$bfc2439c621353$d1ce0$629f$b8b5'
bfc2439c621353
d1ce0
629f
(This requires GNU grep as compiled with libpcre for -P)
This uses \$\K (equivalent to (?<=\$)to look behind at the first $ and (?=\$) to look ahead to the next $. Since these are lookarounds, they are not absorbed by grep in the process and therefore d1ce0 is available to be found.
Here's a single POSIX sed command to extract those:
$ sed 's/^[^$]*\$//; s/\$[^$]*$//; s/\$/\n/g' \
<<<'b5f1e7$bfc2439c621353$d1ce0$629f$b8b5'
bfc2439c621353
d1ce0
629f
This does not use any GNU notation and should work on any POSIX-compatible system (such as OS X). It removes the leading and trailing portions that aren't wanted, then replaces each $ with a newline.
Using bash regex:
var="b5f1e7\$bfc2439c621353\$d1ce0\$629f\$b8b5" # string to var
while [[ $var =~ ([^$]*\$)([^$]*)\$(.*) ]] # matching
do
echo -n "${BASH_REMATCH[2]} " # 2nd element has the match
var="${BASH_REMATCH[3]}" # 3rd is the rest of the string
done
echo # trailing newline
bfc2439c621353 629f
I tested a regex on http://regexr.com/ and it works like expected.
How can I run this by using sed?
/^.*?OU=([^,]*)/g
The test string looks like:
mario.test;Mario Test;Mario;Test;123;+001122334455;CN=Mario Test,OU=AT-Test,OU=Tese Sites,DC=Test,DC=local;test.local
And the output is:
mario.test;Mario Test;Mario;Test;123;+001122334455;CN=Mario Test,OU=AT-Test
So it should cut the string before the second OU= starts.
Thanks
sed is not the best tool for this case when you have to deal with text that contains "columns" and can be split. Here are two possibilities, one with sed and the other with awk:
s="mario.test;Mario Test;Mario;Test;123;+001122334455,CN=Mario Test,OU=AT-Linz,OU=Tese Sites,DC=Test,DC=local;test.local"
echo $s | sed 's/OU=/й/' | sed 's/\([^й]*\)й\([^,]*\).*/\1OU=\2/'
echo $s | awk -F",OU=" '{print $1 ",OU=" $2}'
See the online demo
The awk solution splits with ,OU= substring and then joins the first and second column with the separator (since it is hardcoded, it is easy to put it back).
sed uses 2 passes: 1) add a non-used char (must be a control char, here, a Cyrillic letter is used for better "visibility") to mark the border of our match, 2) match all we do not need and match and capture what we need to keep with the help of capturing groups and backreferences.
Your question isn't clear but from reading your comments, are either of these what you're looking for?
$ awk -F, '{print $1 FS $2}' file
mario.test;Mario Test;Mario;Test;123;+001122334455;CN=Mario Test,OU=AT-Test
$ awk -F'CN=[^,]+,OU=|,' '{print $1 $2}' file
mario.test;Mario Test;Mario;Test;123;+001122334455;AT-Test
I have created this basic script:
#!/bin/bash
file="/usr/share/dict/words"
var=2
sed -n "/^$var$/p" /usr/share/dict/words
However, it's not working as required to be (or still need some more logic to put in it).
Here, it should print only 2 letter words but with this it is giving different output
Can anyone suggest ideas on how to achieve this with sed or with awk?
it should print only 2 letter words
Your sed command is just searching for lines with 2 in text.
You can use awk for this:
awk 'length() == 2' file
Or using a shell variable:
awk -v n=$var 'length() == n' file
What you are executing is:
sed -n "/^2$/p" /usr/share/dict/words
This means: all lines consisting in exactly the number 2, nothing else. Of course this does not return anything, since /usr/share/dict/words has words and not numbers (as far as I know).
If you want to print those lines consisting in two characters, you need to use something like .. (since . matches any character):
sed -n "/^..$/p" /usr/share/dict/words
To make the number of characters variable, use a quantifier {} like (note the usage of \ to have sed's BRE understand properly):
sed -n "/^.\{2\}$/p" /usr/share/dict/words
Or, with a variable:
sed -n '/^.\{'"$var"'\}$/p' /usr/share/dict/words
Note that we are putting the variable outside the quotes for safety (thanks Ed Morton in comments for the reminder).
Pure bash... :)
file="/usr/share/dict/words"
var=2
#building a regex
str=$(printf "%${var}s")
re="^${str// /.}$"
while read -r word
do
[[ "$word" =~ $re ]] && echo "$word"
done < "$file"
It builds a regex in a form ^..$ (the number of dots is variable). So doing it in 2 steps:
create a string of the desired length e.g: %2s. without args the printf prints only the filler spaces for the desired length e.g.: 2
but we have a variable var, therefore %${var}s
replace all spaces in the string with .
but don't use this solution. It is too slow, and here are better utilities for this, best is imho grep.
file="/usr/share/dict/words"
var=5
grep -P "^\w{$var}$" "$file"
Try awk-
awk -v var=2 '{if (length($0) == var) print $0}' /usr/share/dict/words
This can be shortened to
awk -v var=2 'length($0) == var' /usr/share/dict/words
which has the same effect.
To output only lines matching 2 alphabetic characters with grep:
grep '^[[:alpha:]]\{2\}$' /usr/share/dict/words
GNU awk and mawk at least (due to empty FS):
$ awk -F '' 'NF==2' /usr/share/dict/words #| head -5
aa
Ab
ad
ae
Ah
Empty FS separates each character on its own field so NF tells the record length.
Everyone!!
I want to get specific substring from stdout of command.
stdout:
{"response":
{"id":"110200dev1","success":"true","token":"09ad7cc7da1db13334281b84f2a8fa54"},"success":"true"}
I need to get a hex string after token without quotation marks, the length of hex string is 32 letters.I suppose it can be done by sed or egrep. I don't want to use awk here. Because the stdout is being changed very often.
This is an alternate gnu-awk solution when grep -P isn't available:
awk -F: '{gsub(/"/, "")} NF==2&&$1=="token"{print $2}' RS='[{},]' <<< "$string"
09ad7cc7da1db13334281b84f2a8fa54
grep's nature is extracting things:
grep -Po '"token":"\K[^"]+'
-P option interprets the pattern as a Perl regular expression.
-o option shows only the matching part that matches the pattern.
\K throws away everything that it has matched up to that point.
Or an option using sed...
sed 's/.*"token":"\([^"]*\)".*/\1/'
With sed:
your-command | sed 's/.*"token":"\([^"]*\)".*/\1/'
YourStreamOrFile | sed -n 's/.*"token":"\([a-f0-9]\{32\}\)".*/\1/p'
doesn not return a full string if not corresponding
I'm trying to match the contents of a string that contains sequences of quotes using Shell Script, at the time the far I got was this:
et="\"He\" \"llo\""
echo $et | sed -e '/\"(.*?)\"/g'
Which returns this:
"He" "llo"
But I don't want the quote marks to appear on the result, also how can I echo only the first, or the second, or the third, etc. match?
sed -e 's/"\([^"]*\)"/\1/g' will remove quotes around balanced " quotes. To only show the first, second match etc with sed you probably have to make different capture groups.
$ echo '"1" "2" "3"' | sed -e 's/"\([^"]*\)" "\([^"]*\)" "\([^"]*\)"/\2/g'
2
$
Provided that what is wanted is only the text between the first pair of quotes, here is a solution with perl:
echo $et | perl -ne '/"[^"]+"/ and print "$&\n";'
This will also handle quotes witin quotes if they are preceded by a backslash:
echo $et | perl -ne '/"[^"\\]+(\\.[^"]*)*"/ and print "$&\n";'
This is much simpler with awk since you can specify the double-quote to be the field separator.
$ et='"He" "llo"'
$ awk -F'"' '{print $2}' <<<$et
He
$ awk -F'"' '{print $4}' <<<$et
llo
Note: This is also scalable and the strings fields will be in multiples of two, i.e $2, $4, $6, etc.
You can also do something like this:
[srikanth#myhost ~]$ echo "\"He\" \"llo\"" | awk ' { match($0,/([A-Za-z]+)[" ]+([A-Za-z]+)/,a); print a[1]","a[2]} '
He,llo