I develop a game with cocos2d-x rc1 and I need a text field where I will show the score of the player. Which one to use cocos2d::Label or TextField defined in cocos/ui/UITextField.cpp ? What is the difference? For example, I have noticed that Label has enableShadow, but TextField misses.
Don't use a TextField for a mere output field. (Jeff Johnson: "GUI Bloopers", Blooper #17.)
Text fields are meant for input. The fact that they can be active or passive doesn't mean that they should be used in always-passive mode for output. To display a result, use a Label indicating what the following value is, and another Label for the value itself.
Score: 42
Later
One reason is that an inactive TextField typically has an appearance that dampens its visibility, like being grayed out. Another one is that the border surrounding a TextField identifies it as a place where data can be entered, if not now, then some other time; and this is bound to irritate users that are trained to observe such niceties - and there are, me 4 1 ;-)
Related
I'm using the page below a POS sales list. Here the user can use the barcode pistol and pass the article and the code is translated into the item no.
The problem is when they use the pistol and end to pick a item and want to pass to next one the line go automatically to the first column (Item type) and my goal was to force to go into the second column (Item no), because the Item type is by default the type "product".
Only change the order of columns of Item no to Item product is not enough in this case.
Since ACTIVATE is not supported for controls in RTC.
Not many good options here.
Try using QuickEntry Property. Set it to false for all controls on subpage except No..
Create custom page with as less fields as possible, use it as buffer to scan all items and create sales lines upon closing of this new page. You can implement desired behavior on this page and keep original page almost unmodified
Create add-in that will intercept scanner output somehow.
I have several tabs. There is a date picker on each tab. I need that date to be the same on all tabs no matter what. So, if the user changes the date on Tab 1, then goes to tab 2, the date on tab 2 will have changed also. I have never created an application level item before and I thought that might be the most efficient way to accomplish what I need (by setting that item's value to the date the user selected). My problem is that I don't know how to set the value of the application item and also how to retrieve that value on another tab.
You didn't describe what exactly you're trying to do, but - if each tab represents its own table, why do you keep the same date value in all of them? Doesn't look like a normalized data model. Consider using a single date column (in one - master - table) and use (i.e. reference) it in others (i.e. details).
As of your question: How about creating a global page (i.e. page 0) and having a date picker item on it? You can display it on any other page you want. For example, if you set its value while on tab 1 and then move on to tab 3, you can again modify that value which will be visible on all other pages. Basically, you'd maintain just one item instead of as many as number of tabs involved. (BTW, doesn't that remind you of what I described in the first paragraph?).
Alternatively, create a date picker item on tab 1 page; on all other pages, create a "lookup" (display) item which would simply display what's been selected on tab 1. That's easy to do, just make its source to be an "Item", such as P1_DATE_ITEM.
In Shared Components > Application Items create new Item called G_DATE.
Then for every datepicker add Dynamic Action on Event Change.
In True action Set Value select Type PL/SQL Expression with code
:G_DATE := :P1_DATEPICKER1;
and Items to Submit :P1_DATEPICKER1
Next in every datepicker Source set Type PL/SQL Expression with code
:G_DATE
used Always (...)
Regards
I have a situation where I'm using the IEditorDataFilter interface within a custom UltraGrid editor control to automatically map values from a bound data source when they're displayed in the grid cells. In this case it's converting guid-based key values into user-friendly values, and it works well by displaying what I need in the cell, but retaining the GUID values as the 'value' behind the scenes.
My issue is what happens when I enable the built-in group by functionality and the user groups by a column using my editor. In that case the group by headers default to using the cell's value, which is the guid in my case, so I end up with headers like this:
Column A: 7F720CE8-123A-4A5D-95A7-6DC6EFFE5009 (10 items)
What I really want is the cell's display value to be used instead so it's something like this:
Column A: Item 1 (10 items)
What I've tried so far
Infragistics provides a couple mechanisms for modifying what's shown in group by rows:
GroupByRowDescriptionMask property of the grid (http://bit.ly/1g72t1b)
Manually set the row description via the InitializeGroupByRow event (http://bit.ly/1ix1CbK)
Option 1 doesn't appear to give me what I need because the cell's display value is not exposed in the set of tokens they provide. Option 2 looks promising but it's not clear to me how to get at the cell's display value. The event argument only appears to contain the cell's backing value, which in my case is the GUID.
Is there a proper approach for using the group by functionality when you're also using an IEditorDataFilter implementation to convert values?
This may be frowned upon, but I asked my question on the Infragistic forums as well, and a complete answer is available there (along with an example solution demonstrating the problem):
http://www.infragistics.com/community/forums/p/88541/439210.aspx
In short, I was applying my custom editors at the cell level, which made them unavailable when the rows were grouped together. A better approach would be to apply the editor at the column level, which would make the editor available at the time of grouping, and would provide the expected behavior.
I am having difficulty with a duration field on my form/table.
The users need to indicate in HH:MM how long a meeting took.
What datatype should the column have in the Table. Currently it is TIMESTAMP
How can I make the field have an input mask of 'HH:MM'. What I would like is for the user to be able to type '0130' and the field format it to '01:30' immediately.
Reporting on these times is required so I assume that entering the data as VARCHAR will not help.
Honestly, this is not such an easy subject as people might think it is, and probably more from a user interface point of view than technically.
The easiest way out? The apex datetimepicker. And honestly, if you're new to the technology I'd advise you to use this, especially if you want to steer clear from javascript/jquery initially.
Let's put it this way: the datepicker is fine and works good, but time is really not that fantastic.
Not all that hot right. The value in the input item does not change until you hit 'Close'. The time component seems like a last second sloppy addition honestly. It works, however. (But I'd still set the field to readonly so that a user can not enter text directly.)
Allowing text to be entered means it needs to be validated according to the correct format mask. And format masks differ between those in jQuery (the datepicker) and those in Oracle, and it might be possible that your oracle format mask is not possible in the datepicker, adding even more complexity. There is also no 'live' date validation (nor datetime), there is only the builtin item validation which will check the format mask and which fires on submit.
Anyway, I'd say take a look at it. Set your item to be displayed as a Date Picker, and use the format mask under settings to get the datetime picker:
Now you can push it further of course, though it'll cost some effort. There are several options though.
Personally, when I've implemented date+time I've always split the date from the time in 2 fields. 1 with the date component, and one with the time component, while keeping the item with the original value hidden (so 3 items total). I then use the datepicker on the date item, and use jquery timepicker plugins on the time item. On submit I then add the 2 values together and parse them in a date, and put this value in the original item again (to allow the standard processing to work on items with source set to database column).
One example of a timepicker is here, another one here. They're both not that hard to implement. They have good documentation too. I don't want to dive in the implementation of it here though, I advise you take a look at it first and see how much it scares you. (I'd set up an apex demo but am a bit pressed for time at the moment).
For example, using Trent's (second link) plugin:
put the js file in the apex images directory. I made a folder "/custom" in my case
add the required js files to the page (assuming apex 4.2, put this in javascript file urls)
#IMAGE_PREFIX#libraries/jquery-ui/1.8.22/ui/jquery.ui.slider.js
#IMAGE_PREFIX#custom/jquery-ui-timepicker-addon.js
use onload code such as this to initialize a field
$("#P95_DEPARTURE_TIME").timepicker({hourGrid: 4,minuteGrid: 10});
It'll end up looking as this:
Any further interaction between pickers will need to be handled in javascript code if you want it live. Don't forget server validations.
As for items, my hidden date item has format mask DD-MON-YYYY HH24:MI. Format masks are important, because items are bind variables, and bind variables are varchar2. The value in the html form is also just that, text.
For example, this is on my displayed date item, with a similar setup for the time item:
Then in an after-submit computation I glue the values together again and put them in the m that'll save the value to the database:
:P95_DEPARTURE_DATE_DISP||' '||:P95_DEPARTURE_TIME
This is just a short guide on the setup though, but might be interesting once you're a bit more familiar with the product.
There are also 2 timepicker plugins on apex-plugin, but honestly I don't find them interesting at all when compared to these already existing fine jquery plugins.
Give it some thought and look at it.
If quarters are enough..
item: text field with autocomplete
SELECT ss|| ':' || dd ss_dd
FROM
(SELECT to_char(trunc(sysdate)+(level - 1)/ 24,'HH24')ss
FROM dual CONNECT BY level <= 24),
(SELECT lpad(mod(15 * level, 60), 2, '0') dd
FROM dual CONNECT BY level <= 4)
APEX 4.2: Just to shed some light for any future viewings; now there are loads of Apex plugins for the purpose of picking Date/Time or both returning variations of date time formats as you would required. For e.g. as in your case HH:MM or HH24:MI.
I have personally used TimePicker plugin from http://www.apex-plugin.com which I have no problem in recommending.
Using the Pie Chart ( http://code.google.com/apis/visualization/documentation/gallery/piechart.html ), is there anyway I can add/remove a data after the page was loaded?
For example, after a user click on a link I want to be able to remove one of the parts of the pie and when he clicks another link I want to add a new part.
Thanks.
Joel
Yes, it is possible. I've thrown together an example on JsFiddle. It's probably not exactly how you would do in a production environment but it should give you an idea.
Basically what I do is:
Make the DataTable and PieChart accessible from outside the drawChart() function (or whatever your draw method is called)
Use the removeRow() method on the DataTable object
Redraw the chart.
Joel, I did what you asked using a ckeckbox instead of links. When the checkbox has unchecked, I called data.removeRow(data.getNumberOfRows()-1) as jensgram points out. And when it was checked I called addRow(theDeletedRow).
Just take care that the added/removed row should be the last one of the RataTable (removing the first row doesn't make all other elements in the array go up), to keep the deleted value in a variable so you can add it again later, and try to specify colors in your options, so each part of the pie doesn't change of color (it gives the appearance that it is a completelly different pie, instead of the same one without just one part).