I have used Keil uVision5 to create a hex file for the target STM32F103VE and I was not able to generate the hex. Here is the error log.(I have already thoroughly searched for the answer):
linking...
FromELF: creating hex file...
.\CompileOutput\Main.hex: Error: Q0122E: Could not open file '.\CompileOutput\Main.axf': No such file or directory
Finished: 0 information, 0 warning and 1 error messages.
After Build - User command #1: C:\Keil_v5\ARM\ARMCC\bin\fromelf.exe --bin -o .\Output\Main.bin .\CompileOutput\Main.axf
".\CompileOutput\Main.axf": Error: Q0122E: Could not open file '.\CompileOutput\Main.axf': No such file or directory
Finished: 0 information, 0 warning and 1 error messages.
".\CompileOutput\Main.axf" - 0 Error(s), 0 Warning(s).
Can anyone please help me get rid of this error?
We had a project with a similar error, and it turned out that we needed to disable cross-module optimization in the build options window.
I have similar issue. In my case full path to project contain '!' char.
Try with simple path like 'c:\myProj'
Related
I got an old solution from a friend. It ran on .NET Framework 2.0. Now I have windows 10 and VS 2017. But when I try to open the project and run it I get the following error:
CS1504 Source file 'C:\temp\dashboard\
This is the exact error I am getting. It does not specify what file, and it doesn't close the apostrophe either. Strange. In the output, I get this
1>CSC : error CS1504: Source file 'C:\temp\dashboard\========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
Any idea what could be wrong here? CS1504 error is related to some file cannot be read by the compiler, but that doesn't specify any file.
When I build a project in vs 2017, I can get errors like this:
1>------ Build started: Project: TortoiseGitMerge, Configuration: Debug Win32 ------
1>Performing Custom Build Tools
1>The system cannot find the path specified.
1>C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(171,5): error MSB6006: "cmd.exe" exited with code 3.
1>Done building project "TortoiseMerge.vcxproj" -- FAILED.
========== Build: 0 succeeded, 1 failed, 10 up-to-date, 0 skipped ==========
In this error message, there is no information leading me closer to a solution.
Which path was specified?
How do I find out? What is the exact reason that the path in question was not written in that error message?
Performing Custom Build Tools
That isn't enough to know what is going on. You'll want to jack up the build verbosity so you can see these custom build commands getting executed. Finding the one that failed then gives you a shot at diagnosing the mishap.
Use Tools > Options > Projects and Solutions > Build and Run, "MSBuild project build output verbosity" = Detailed. The build trace you now see in the Output window gets a lot more chatty and should show the actual command that fell over.
I've been trying all day long to solve this issue and it's driving me crazy, I'm trying to debug and run my very first C++ program, Hello World, and I get the following notice:
1>------ Build started: Project: HelloWorld, Configuration: Debug
Win32 ------ 1>LINK : fatal error LNK1104: cannot open file
'C:\Users\win 7\Desktop\C++ tutorials\HelloWorld\Debug\HelloWorld.exe'
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I also get an AVG detection which says:
threat: potentially harmful program Hacktool.ABLQ object name:
C:\Users\win 7\Desktop\C++ tutorials\HelloWorld\Debug\HelloWorld.exe
So I tried adding it to the exceptions list, that also didn't help, I don't get it, what's the problem then?? and how can I fix this?
Make sure your HelloWorld.exe is not running when compiling linking. Also Antivirus can quarantine executable during build when suspect harmful code there. Try to add the build directory in the exceptions list of your antivirus when you trust the source code you building.
I'm creating a kinect project in Visual Studio 2008 using OpenNi, NITE and OpenGL.
At random times dureing development I get the following error:
Error result 1 returned from 'C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin\rc.exe'.
I've searched the internet with no luck.
I am able to create a new project and copy all my code across and it works fine but this is not something I want to be doing multiple times each day.
If any more info is required I'd be happy to give it.
EDIT full output window reads
1>------ Build started: Project: PointViewer, Configuration: Debug Win32 ------
1>Compiling resources...
1>Microsoft (R) Windows (R) Resource Compiler Version 6.0.5724.0
1>Copyright (C) Microsoft Corporation. All rights reserved.
1>fatal error RC1110: could not open ..\Res\NITE.rc
1>Project : error PRJ0002 : Error result 1 returned from 'C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin\rc.exe'.
1>Build log was saved at "file://d:\Documents\Uni work\Year 4\Personal Project\Samples \PointViewer\Debug\BuildLog.htm"
1>PointViewer - 1 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
You are referencing your RC file via a relative path (..).
It seems likely your current directory is changing, and hence .., and the path to your RC file changes, causing the error.
You will have to make sure that your RC file is referred to in a way that doesn't change.
Try removing it from the project, and re-adding it, taking care to refer to it only in absolute terms.
Check your project and build settings for the directory where the build is to start, and how the filename is preserved in the project settings. You're looking for something like "Persist Filenames As...".
I had the same error. Move your entire project folder into documents/visualstudio/projects. If that doesn't work, move it to your desktop. It is just a linking problem, it can't find the resources. Make sure you aren't moving your folders around as this can cause these issues.
A possible reason for the error described - .rc file was renamed.
Check the .rc file name in your .vcproj file and see that it actually exists on disk.
I am trying to build a .dll in order to link it to one of my projects. But the build always fails : I got these messages in the output and I don't know what it means. It seems that something is missing, but I couldn't find what.
I am trying to link a Mesher called Netgen
http://www.hpfem.jku.at/netgen/
1>adfront2.obj : warning LNK4075: ignoring '/EDITANDCONTINUE' due to '/OPT:ICF' specification
1> Creating library D:\Documents\Visual Studio 2008\Projects\converter/lib\nglib.lib and object D:\Documents\Visual Studio 2008\Projects\converter/lib\nglib.exp
1>Embedding manifest...
1>Performing Post-Build Event...
1>Environment variable NETGENDIR not found.... using default location!!!
1>POSTBUILD Script for nglib ........
1>Installing required files into XXX\Netgen\windows....\nglib-instNoOCC_Win32 ....
1>File not found - nglib.dll
1>0 File(s) copied
1>POSTBUILD Script for nglib FAILED..... Error copying the nglib DLL into install folder!!!
1>Project : error PRJ0002 : Error result 1 returned from 'C:\Windows\SysWow64\cmd.exe'.
1>Build log was saved at "file://D:\Documents\Visual Studio 2008\Projects\converter\BuildLog_nglib.htm"
1>nglib - 1 error(s), 49 warning(s)
I hope I am clear enough and thank you by advance for your help.
seems this NetGen lib's project wants to run a post-build event in which it tries to copy the main output (the nglib.dll) to the directory NETGENDIR (which is supposed to be an environment variable). This fails beccuse the dll isn't found.
Either disable the post build event, or check with the NetGen lib's creator what they expect here, there seems to be a mismatch between the project's output dir and the postbuild event.
Would also be nice to see the postbuild event from the vcproj file, maybe you can post it?
You need read, by example the output line:
1>Environment variable NETGENDIR not found.... using default location!!!
After that I suggest that you must read the documentation about how define a enviroment variable named: NETGENDIR