I have below snippet for fetching data from MongoDB using com.mongodb.reactivestreams.client.MongoClient and Flowable
The snippet goes like:
Flowable
.fromPublisher(
mongoClient
.getDatabase(mydb)
.getCollection(mycollection)
.find()
.limit()
)
.firstOrError()
.toMaybe()
.doOnError(error -> { /* somecode */ })
I tried mocking every step of this fluent expression, e.g.
MongoDatabase someDb = Mock(MongoDatabase)
mongoClient.getDatabase(mydb) >> somedb
but on doing this somehow the test keeps running.
What is the correct way to unit test this using Spock?
Fluent interfaces are a PITA to mock, my strategy is to put those calls into a separate class / method and mock that. And then to test the fluent part in an integration test.
In addition to Leonard's idea, you might also want to look into implementing a special ThisResponse implements IDefaultResponse which always returns the mock instance for every mock method call and using that like Mock(defaultResponse: ThisResponse.INSTANCE) for your fluent API class(es). This works nicely as long as the fluent API methods used in the test are supposed to return this or at least another object of the given type. Only where another type is returned, you need to stub something.
Check this answer for more details. As soon as you update your question with a little MCVE, you may also ask follow-up questions if you have any problems using that solution.
Update 2022-03-08: I re-wrote the linked answer after learning about the special behaviour of EmptyOrDummyResponse for methods returning the mocked type. I am also describing now the related Spock 2 syntactic sugar syntax there.
I'm quite new to unit testing. I've read around on here as well as done some Googling, but am still a bit confused as to the meaning of each of the four meanings. I came across the following definition which help....
Stub - stubs are minimal implementations of interfaces or base classes
Spy - a spy will record which members were invoked
Fake - more complex, a fake may resemble a production implementation
Mock - A mock is usually dynamically created by a mock library and depending on its configuration, a mock can behave like a dummy, a stub, or a spy
However, I'd like to simplify the meaning (if possible) and ask a few questions.
Do all of the above only relate to functions, or can they be objects or any other type?
Stub - Is Stubbing bascially a way to provide dummy info instead of making the calling to the actual database? So for example, if I had an API call, instead of actually making a call to the API, I just instead make a GET request to a JSON file which is in my tests folder which has some dummy data in, and use that instead of making the API call?
Spy - so is this a way of tracking what happens to a function for example. Meaning you follow when it's called, where it gets passed around to?
Fake - Is this for example a function which you create inside the test file to mimic the real function or be a simpified version of the actual function?
Thanks in advance.
There are multiple attempts at definitions. To my knowledge there is no fully consistent definition, probably due to the fact that mocking frameworks defines things slightly differently. Martin Fowler lists the following (https://martinfowler.com/bliki/TestDouble.html):
Dummy objects are passed around but never actually used. Usually they are just used to fill parameter lists.
Fake objects actually have working implementations, but usually take some shortcut which makes them not suitable for production (an InMemoryTestDatabase is a good example).
Stubs provide canned answers to calls made during the test, usually not responding at all to anything outside what's programmed in for the test.
Spies are stubs that also record some information based on how they were called. One form of this might be an email service that records how many messages it was sent.
Mocks are pre-programmed with expectations which form a specification of the calls they are expected to receive. They can throw an exception if they receive a call they don't expect and are checked during verification to ensure they got all the calls they were expecting.
Fowler has them from this page: http://xunitpatterns.com/Test%20Double.html where you can read about them in a bit more detail.
No, they apply to more then just functions
Yes
Kind of, in most cases you will spy on an object
Yes
The implementation and nomenclatur will depend of what framework you use.
I use ninject extensively with the factory extension. I also use moq to help with testing and in some cases (particularly complicated view models in my MVVM WPF application) I use the ninject mocking kernel to make it easier to automatically create mocks for resources required by the class under test.
In my regular product code, the ninject factory extension makes it easy to just declare an interface for the factory that looks something like this:
public interface IMyViewModelFactory
{
MyViewModel CreateMyViewModel(int recordNum);
}
and the factory extension will automatically supply an implementation which maps the creation method onto a constructor for the class while resolving any other dependencies that are constructor parameters from ninject. So If my class has a constructor that looks like this:
public MyViewModel(ILogger logger, int recordNum)
{
_logger = logger;
_recordNum = recordNum;
}
then the factory extension will create a factory method implementation that gets the ILogger from the ninject kernel and pass through my explicit parameter.
This all works great for the regular product code, but as near as I can tell I can't get this kind of thing to work in my unit tests when I'm using the mocking kernel.
Normally with the mocking kernel I set it up in the initialization method for my test class, bind a small number of interfaces to concrete classes that I want to test and then let the mocking kernel automatically supply mocks for everything else. These mocks can then be configured as needed for a particular test, and everything works great except for the factory methods. I find myself manually implementing factory methods in setup statements for my mock that look something like this:
Kernel.GetMock<IMyViewModelFactory>()
.Setup(f => f.CreateMyViewModel(It.IsAny<ILogger>(), It.IsAny<int>()))
.Returns((ILogger logger, int recordNum) =>
new MyViewModel(Kernel.Get<ILogger>, recordNum);
That way if my test needs to interact with the factory (or more likely some class I'm testing needs to use the factory to create some sub-view model) then it can actually create the instance and dependencies come from the mocking kernel so they can be setup to mock as needed.
Most of the time I love ninject and these extensions, but this is one place where the unit test setup becomes really tedious. I probably wouldn't even mind except for the fact that I'm so spoiled by how easy the factory extension makes it in my product code, and I can't figure out how to get the same benefit in my tests. Of course the above example is contrived, and sadly in many of my view models the number of dependencies and real parameters is large (and the number of view models where I have to setup this kind of thing is large), so the tedium becomes a bigger deal.
I'm hoping someone can tell me that I'm just missing something obvious and that there's a simple way to set this up.
Thanks,
Danny
So I have a factory class and I'm trying to work out what the unit tests should do. From this question I could verify that the interface returned is of a particular concrete type that I would expect.
What should I check for if the factory is returning concrete types (because there is no need - at the moment - for interfaces to be used)? Currently I'm doing something like the following:
[Test]
public void CreateSomeClassWithDependencies()
{
// m_factory is instantiated in the SetUp method
var someClass = m_factory.CreateSomeClassWithDependencies();
Assert.IsNotNull(someClass);
}
The problem with this is that the Assert.IsNotNull seems somewhat redundant.
Also, my factory method might be setting up the dependencies of that particular class like so:
public SomeClass CreateSomeClassWithDependencies()
{
return new SomeClass(CreateADependency(), CreateAnotherDependency(),
CreateAThirdDependency());
}
And I want to make sure that my factory method sets up all these dependencies correctly. Is there no other way to do this then to make those dependencies public/internal properties which I then check for in the unit test? (I'm not a big fan of modifying the test subjects to suit the testing)
Edit: In response to Robert Harvey's question, I'm using NUnit as my unit testing framework (but I wouldn't have thought that it would make too much of a difference)
Often, there's nothing wrong with creating public properties that can be used for state-based testing. Yes: It's code you created to enable a test scenario, but does it hurt your API? Is it conceivable that other clients would find the same property useful later on?
There's a fine line between test-specific code and Test-Driven Design. We shouldn't introduce code that has no other potential than to satisfy a testing requirement, but it's quite alright to introduce new code that follow generally accepted design principles. We let the testing drive our design - that's why we call it TDD :)
Adding one or more properties to a class to give the user a better possibility of inspecting that class is, in my opinion, often a reasonable thing to do, so I don't think you should dismiss introducing such properties.
Apart from that, I second nader's answer :)
If the factory is returning concrete types, and you're guaranteeing that your factory always returns a concrete type, and not null, then no, there isn't too much value in the test. It does allows you to make sure, over time that this expectation isn't violated, and things like exceptions aren't thrown.
This style of test simply makes sure that, as you make changes in the future, your factory behaviour won't change without you knowing.
If your language supports it, for your dependencies, you can use reflection. This isn't always the easiest to maintain, and couples your tests very tightly to your implementation. You have to decide if that's acceptable. This approach tends to be very brittle.
But you really seem to be trying to separate which classes are constructed, from how the constructors are called. You might just be better off with using a DI framework to get that kind of flexibility.
By new-ing up all your types as you need them, you don't give yourself many seams (a seam is a place where you can alter behaviour in your program without editing in that place) to work with.
With the example as you give it though, you could derive a class from the factory. Then override / mock CreateADependency(), CreateAnotherDependency() and CreateAThirdDependency(). Now when you call CreateSomeClassWithDependencies(), you are able to sense whether or not the correct dependencies were created.
Note: the definition of "seam" comes from Michael Feather's book, "Working Effectively with Legacy Code". It contains examples of many techniques to add testability to untested code. You may find it very useful.
What we do is create the dependancies with factories, and we use a dependancy injection framework to substitute mock factories for the real ones when the test is run. Then we set up the appropriate expectations on those mock factories.
You can always check stuff with reflection. There is no need to expose something just for unit tests. I find it quite rare that I need to reach in with reflection and it may be a sign of bad design.
Looking at your sample code, yes the Assert not null seems redundant, depending on the way you designed your factory, some will return null objects from the factory as opposed to exceptioning out.
As I understand it you want to test that the dependencies are built correctly and passed to the new instance?
If I was not able to use a framework like google guice, I would probably do it something like this (here using JMock and Hamcrest):
#Test
public void CreateSomeClassWithDependencies()
{
dependencyFactory = context.mock(DependencyFactory.class);
classAFactory = context.mock(ClassAFactory.class);
myDependency0 = context.mock(MyDependency0.class);
myDependency1 = context.mock(MyDependency1.class);
myDependency2 = context.mock(MyDependency2.class);
myClassA = context.mock(ClassA.class);
context.checking(new Expectations(){{
oneOf(dependencyFactory).createDependency0(); will(returnValue(myDependency0));
oneOf(dependencyFactory).createDependency1(); will(returnValue(myDependency1));
oneOf(dependencyFactory).createDependency2(); will(returnValue(myDependency2));
oneOf(classAFactory).createClassA(myDependency0, myDependency1, myDependency2);
will(returnValue(myClassA));
}});
builder = new ClassABuilder(dependencyFactory, classAFactory);
assertThat(builder.make(), equalTo(myClassA));
}
(if you cannot mock ClassA you can assign a non-mock version to myClassA using new)
I know how I use these terms, but I'm wondering if there are accepted definitions for faking, mocking, and stubbing for unit tests? How do you define these for your tests? Describe situations where you might use each.
Here is how I use them:
Fake: a class that implements an interface but contains fixed data and no logic. Simply returns "good" or "bad" data depending on the implementation.
Mock: a class that implements an interface and allows the ability to dynamically set the values to return/exceptions to throw from particular methods and provides the ability to check if particular methods have been called/not called.
Stub: Like a mock class, except that it doesn't provide the ability to verify that methods have been called/not called.
Mocks and stubs can be hand generated or generated by a mocking framework. Fake classes are generated by hand. I use mocks primarily to verify interactions between my class and dependent classes. I use stubs once I have verified the interactions and am testing alternate paths through my code. I use fake classes primarily to abstract out data dependencies or when mocks/stubs are too tedious to set up each time.
You can get some information :
From Martin Fowler about Mock and Stub
Fake objects actually have working implementations, but usually take some shortcut which makes them not suitable for production
Stubs provide canned answers to calls made during the test, usually not responding at all to anything outside what's programmed in for the test. Stubs may also record information about calls, such as an email gateway stub that remembers the messages it 'sent', or maybe only how many messages it 'sent'.
Mocks are what we are talking about here: objects pre-programmed with expectations which form a specification of the calls they are expected to receive.
From xunitpattern:
Fake: We acquire or build a very lightweight implementation of the same functionality as provided by a component that the SUT depends on and instruct the SUT to use it instead of the real.
Stub : This implementation is configured to respond to calls from the SUT with the values (or exceptions) that will exercise the Untested Code (see Production Bugs on page X) within the SUT. A key indication for using a Test Stub is having Untested Code caused by the inability to control the indirect inputs of the SUT
Mock Object that implements the same interface as an object on which the SUT (System Under Test) depends. We can use a Mock Object as an observation point when we need to do Behavior Verification to avoid having an Untested Requirement (see Production Bugs on page X) caused by an inability to observe side-effects of invoking methods on the SUT.
Personally
I try to simplify by using : Mock and Stub. I use Mock when it's an object that returns a value that is set to the tested class. I use Stub to mimic an Interface or Abstract class to be tested. In fact, it doesn't really matter what you call it, they are all classes that aren't used in production, and are used as utility classes for testing.
Stub - an object that provides predefined answers to method calls.
Mock - an object on which you set expectations.
Fake - an object with limited capabilities (for the purposes of testing), e.g. a fake web service.
Test Double is the general term for stubs, mocks and fakes. But informally, you'll often hear people simply call them mocks.
I am surprised that this question has been around for so long and nobody has as yet provided an answer based on Roy Osherove's "The Art of Unit Testing".
In "3.1 Introducing stubs" defines a stub as:
A stub is a controllable replacement for an existing dependency
(or collaborator) in the system. By using a stub, you can test your code without
dealing with the dependency directly.
And defines the difference between stubs and mocks as:
The main thing to remember about mocks versus stubs is that mocks are just like stubs, but you assert against the mock object, whereas you do not assert against a stub.
Fake is just the name used for both stubs and mocks. For example when you don't care about the distinction between stubs and mocks.
The way Osherove's distinguishes between stubs and mocks, means that any class used as a fake for testing can be both a stub or a mock. Which it is for a specific test depends entirely on how you write the checks in your test.
When your test checks values in the class under test, or actually anywhere but the fake, the fake was used as a stub. It just provided values for the class under test to use, either directly through values returned by calls on it or indirectly through causing side effects (in some state) as a result of calls on it.
When your test checks values of the fake, it was used as a mock.
Example of a test where class FakeX is used as a stub:
const pleaseReturn5 = 5;
var fake = new FakeX(pleaseReturn5);
var cut = new ClassUnderTest(fake);
cut.SquareIt;
Assert.AreEqual(25, cut.SomeProperty);
The fake instance is used as a stub because the Assert doesn't use fake at all.
Example of a test where test class X is used as a mock:
const pleaseReturn5 = 5;
var fake = new FakeX(pleaseReturn5);
var cut = new ClassUnderTest(fake);
cut.SquareIt;
Assert.AreEqual(25, fake.SomeProperty);
In this case the Assert checks a value on fake, making that fake a mock.
Now, of course these examples are highly contrived, but I see great merit in this distinction. It makes you aware of how you are testing your stuff and where the dependencies of your test are.
I agree with Osherove's that
from a pure maintainability perspective, in my tests using mocks creates more trouble than not using them. That has been my experience, but I’m always learning something new.
Asserting against the fake is something you really want to avoid as it makes your tests highly dependent upon the implementation of a class that isn't the one under test at all. Which means that the tests for class ActualClassUnderTest can start breaking because the implementation for ClassUsedAsMock changed. And that sends up a foul smell to me. Tests for ActualClassUnderTest should preferably only break when ActualClassUnderTest is changed.
I realize that writing asserts against the fake is a common practice, especially when you are a mockist type of TDD subscriber. I guess I am firmly with Martin Fowler in the classicist camp (See Martin Fowler's "Mocks aren't Stubs") and like Osherove avoid interaction testing (which can only be done by asserting against the fake) as much as possible.
For fun reading on why you should avoid mocks as defined here, google for "fowler mockist classicist". You'll find a plethora of opinions.
As mentioned by the top-voted answer, Martin Fowler discusses these distinctions in Mocks Aren't Stubs, and in particular the subheading The Difference Between Mocks and Stubs, so make sure to read that article.
Rather than focusing on how these things are different, I think it's more enlightening to focus on why these are distinct concepts. Each exists for a different purpose.
Fakes
A fake is an implementation that behaves "naturally", but is not "real". These are fuzzy concepts and so different people have different understandings of what makes things a fake.
One example of a fake is an in-memory database (e.g. using sqlite with the :memory: store). You would never use this for production (since the data is not persisted), but it's perfectly adequate as a database to use in a testing environment. It's also much more lightweight than a "real" database.
As another example, perhaps you use some kind of object store (e.g. Amazon S3) in production, but in a test you can simply save objects to files on disk; then your "save to disk" implementation would be a fake. (Or you could even fake the "save to disk" operation by using an in-memory filesystem instead.)
As a third example, imagine an object that provides a cache API; an object that implements the correct interface but that simply performs no caching at all but always returns a cache miss would be a kind of fake.
The purpose of a fake is not to affect the behavior of the system under test, but rather to simplify the implementation of the test (by removing unnecessary or heavyweight dependencies).
Stubs
A stub is an implementation that behaves "unnaturally". It is preconfigured (usually by the test set-up) to respond to specific inputs with specific outputs.
The purpose of a stub is to get your system under test into a specific state. For example, if you are writing a test for some code that interacts with a REST API, you could stub out the REST API with an API that always returns a canned response, or that responds to an API request with a specific error. This way you could write tests that make assertions about how the system reacts to these states; for example, testing the response your users get if the API returns a 404 error.
A stub is usually implemented to only respond to the exact interactions you've told it to respond to. But the key feature that makes something a stub is its purpose: a stub is all about setting up your test case.
Mocks
A mock is similar to a stub, but with verification added in. The purpose of a mock is to make assertions about how your system under test interacted with the dependency.
For example, if you are writing a test for a system that uploads files to a website, you could build a mock that accepts a file and that you can use to assert that the uploaded file was correct. Or, on a smaller scale, it's common to use a mock of an object to verify that the system under test calls specific methods of the mocked object.
Mocks are tied to interaction testing, which is a specific testing methodology. People who prefer to test system state rather than system interactions will use mocks sparingly if at all.
Test doubles
Fakes, stubs, and mocks all belong to the category of test doubles. A test double is any object or system you use in a test instead of something else. Most automated software testing involves the use of test doubles of some kind or another. Some other kinds of test doubles include dummy values, spies, and I/O blackholes.
The thing that you assert on it is called a mock object.
Everything else that just helped the test run is a stub.
To illustrate the usage of stubs and mocks, I would like to also include an example based on Roy Osherove's "The Art of Unit Testing".
Imagine, we have a LogAnalyzer application which has the sole functionality of printing logs. It not only needs to talk to a web service, but if the web service throws an error, LogAnalyzer has to log the error to a different external dependency, sending it by email to the web service administrator.
Here’s the logic we’d like to test inside LogAnalyzer:
if(fileName.Length<8)
{
try
{
service.LogError("Filename too short:" + fileName);
}
catch (Exception e)
{
email.SendEmail("a","subject",e.Message);
}
}
How do you test that LogAnalyzer calls the email service correctly when the web service throws an exception?
Here are the questions we’re faced with:
How can we replace the web service?
How can we simulate an exception from the web service so that we can
test the call to the email service?
How will we know that the email service was called correctly or at
all?
We can deal with the first two questions by using a stub for the web service. To solve the third problem, we can use a mock object for the email service.
A fake is a generic term that can be used to describe either a stub or a mock.In our test, we’ll have two fakes. One will be the email service mock, which we’ll use to verify that the correct parameters were sent to the email service. The other will be a stub that we’ll use to simulate an exception thrown from the web service. It’s a stub because we won’t be using the web service fake to verify the test result, only to make sure the test runs correctly. The email service is a mock because we’ll assert against it that it was called correctly.
[TestFixture]
public class LogAnalyzer2Tests
{
[Test]
public void Analyze_WebServiceThrows_SendsEmail()
{
StubService stubService = new StubService();
stubService.ToThrow= new Exception("fake exception");
MockEmailService mockEmail = new MockEmailService();
LogAnalyzer2 log = new LogAnalyzer2();
log.Service = stubService
log.Email=mockEmail;
string tooShortFileName="abc.ext";
log.Analyze(tooShortFileName);
Assert.AreEqual("a",mockEmail.To); //MOCKING USED
Assert.AreEqual("fake exception",mockEmail.Body); //MOCKING USED
Assert.AreEqual("subject",mockEmail.Subject);
}
}
Unit testing - is an approach of testing where the unit(class, method) is under control.
Test double - is not a primary object(from OOP world). It is a realisation which is created temporary to test, check or during development. And they are created for closing dependencies of tested unit(method, class...)
Test doubles types:
fake object is a real implementation of interface(protocol) or an extend which is using an inheritance or other approaches which can be used to create - is dependency. Usually it is created by developer as a simplest solution to substitute some dependency
stub object is a bare object(0, nil and methods without logic) with extra state which is predefined(by developer) to define returned values. Usually it is created by framework
class StubA: A {
override func foo() -> String {
return "My Stub"
}
}
mock object is very similar to stub object but the extra state is changed during program execution to check if something happened(method was called, arguments, when, how often...).
class MockA: A {
var isFooCalled = false
override func foo() -> String {
isFooCalled = true
return "My Mock"
}
}
spy object is a real object with a "partial mocking". It means that you work with a non-double object except mocked behavior
dummy object is object which is necessary to run a test but no one variable or method of this object is not called.
stub vs mock
Martin Fowler said
There is a difference in that the stub uses state verification while the mock uses behavior verification.
[Mockito mock vs spy]
All of them are called Test Doubles and used to inject the dependencies that your test case needs.
Stub:
It already has a predefined behavior to set your expectation
for example, stub returns only the success case of your API response
A mock is a smarter stub. You verify your test passes through it.
so you could make amock that return either the success or failure success depending on the condition could be changed in your test case.
If you are familiar with Arrange-Act-Assert, then one way of explaining the difference between stub and mock that might be useful for you, is that stubs belong to the arrange section as they are for arranging input state, and mocks belong to the assert section as they are for asserting results against.
Dummies don't do anything. They are just for filling up parameter lists, so that you don't get undefined or null errors. They also exist to satisfy the type checker in statically typed languages, so that you can be allowed to compile and run.
Stub, Fakes and Mocks have different meanings across different sources. I suggest you to introduce your team internal terms and agree upon their meaning.
I think it is important to distinguish between two approaches:
- behaviour validation (implies behaviour substitution)
- end-state validation (implies behaviour emulation)
Consider email sending in case of error. When doing behaviour validation - you check that method Send of IEmailSender was executed once. And you need to emulate return result of this method, return Id of the sent message. So you say: "I expect that Send will be called. And I will just return dummy (or random) Id for any call". This is behaviour validation:
emailSender.Expect(es=>es.Send(anyThing)).Return((subject,body) => "dummyId")
When doing state validation you will need to create TestEmailSender that implements IEmailSender. And implement Send method - by saving input to some data structure that will be used for future state verification like array of some objects SentEmails and then it tests you will check that SentEmails contains expected email. This is state validation:
Assert.AreEqual(1, emailSender.SentEmails.Count)
From my readings I understood that Behaviour validation usually called Mocks.
And State validation usually called Stubs or Fakes.
It's a matter of making the tests expressive. I set expectations on a Mock if I want the test to describe a relationship between two objects. I stub return values if I'm setting up a supporting object to get me to the interesting behaviour in the test.
stub and fake are objects in that they can vary their response based on input parameters. the main difference between them is that a Fake is closer to a real-world implementation than a stub. Stubs contain basically hard-coded responses to an expected request. Let see an example:
public class MyUnitTest {
#Test
public void testConcatenate() {
StubDependency stubDependency = new StubDependency();
int result = stubDependency.toNumber("one", "two");
assertEquals("onetwo", result);
}
}
public class StubDependency() {
public int toNumber(string param) {
if (param == “one”) {
return 1;
}
if (param == “two”) {
return 2;
}
}
}
A mock is a step up from fakes and stubs. Mocks provide the same functionality as stubs but are more complex. They can have rules defined for them that dictate in what order methods on their API must be called. Most mocks can track how many times a method was called and can react based on that information. Mocks generally know the context of each call and can react differently in different situations. Because of this, mocks require some knowledge of the class they are mocking. a stub generally cannot track how many times a method was called or in what order a sequence of methods was called. A mock looks like:
public class MockADependency {
private int ShouldCallTwice;
private boolean ShouldCallAtEnd;
private boolean ShouldCallFirst;
public int StringToInteger(String s) {
if (s == "abc") {
return 1;
}
if (s == "xyz") {
return 2;
}
return 0;
}
public void ShouldCallFirst() {
if ((ShouldCallTwice > 0) || ShouldCallAtEnd)
throw new AssertionException("ShouldCallFirst not first thod called");
ShouldCallFirst = true;
}
public int ShouldCallTwice(string s) {
if (!ShouldCallFirst)
throw new AssertionException("ShouldCallTwice called before ShouldCallFirst");
if (ShouldCallAtEnd)
throw new AssertionException("ShouldCallTwice called after ShouldCallAtEnd");
if (ShouldCallTwice >= 2)
throw new AssertionException("ShouldCallTwice called more than twice");
ShouldCallTwice++;
return StringToInteger(s);
}
public void ShouldCallAtEnd() {
if (!ShouldCallFirst)
throw new AssertionException("ShouldCallAtEnd called before ShouldCallFirst");
if (ShouldCallTwice != 2) throw new AssertionException("ShouldCallTwice not called twice");
ShouldCallAtEnd = true;
}
}
According to the book "Unit Testing Principles, Practices, and Patterns by Vladimir Khorikov" :
Mocks: help to emulate and examine outcoming interactions. These interactions are calls the SUT makes to its dependencies to change their state. In other words it helps to examine the interaction (behaviour) of SUT and its dependencies. mocks could be :
Spy : created manually
Mocks : created using framework
Stubs: helps to emulate incoming interactions. These interactions are calls the SUT makes to its dependencies to get input data. IN other words it helps to test the data passed to SUT. It could be 3 types
Fake: is usually implemented to replace a dependency that doesn’t yet exist.
Dummy: is hard-coded value.
Stubs: Fledged dependency that you configure to return different values for different scenarios.
In xUnit Test Patterns book by Gerard Meszaros There is a nice table that gives a good insight about differences
I tend to use just 2 terms - Fake and Mock.
Mock only when using a mocking framework like Moq for example because it doesn't seem right to refer to it as a Fake when it's being created with new Mock<ISomething>() - while you can technically use a mocking framework to create Stubs or Fakes, it just seems kind of dumb to call it that in this situation - it has to be a Mock.
Fake for everything else. If a Fake can be summarised as an implementation with reduced capabilities, then I think a Stub could also be a Fake (and if not, who cares, everyone knows what I mean, and not once has anyone ever said "I think you'll find that's a Stub")