I have problem when creating a BPEL Project that invoke external web-service
it seems that the server can't see the description of service
12:13:34,384 ERROR [NStateLatch] Latch error, was releasing for state 1 but actually in -1
12:13:34,387 WARN [ProcessStoreImpl] Deployment failed within the engine, store >undeploying process.
org.apache.ode.bpel.iapi.ContextException: Cannot find definition for service {[http://www.example.org/AvailableFlightTest/]}FlightService in the context of process {[http://testthree]}TestThree-48
I check the port and the name of service and all thing is right
your wsdl end point url is not working. Open wsdl, find endpoint url (under tag soap: address location), which is being called during your deployment.
try to open this end point url in web browser, you will get exact error or issue which might be causing this problem.
Regards,
ambuj
"Master yourself, Master the enemy"
Related
I have created a Talend job and deployed it as a Axis Web Service.
I am calling this Web Service from my Web Application.
My application and web service are deployed over Tomcat server.
For Valid Inputs:
Runs Perfectly.
For Invalid Inputs:
It throws Error/exceptions in Tomcat Server.
I want this Errors into my application. I didn't get any error related information in the Response sent by web service.
Error message on Tomcat Server
XML response of Web service
If I understand your question you are not so much asking how to fix this error, but how to get feedback about your error. There are several ways but here is a simple method.
Add a tLogCatcher to your job, and point its output to a tSendMail component. You can run the output thru a tMap do things like adding HTML formatting. You can also create a joblet with these two components and use the joblet in every job so you do not have to recreate it every time.
The diagram below shows a real simple case where I add tLogCatcher and tSendMail directly to the job. When there is an error it will send me an email with the details. You can use any of the columns in row11, I am only using job and message in my example.
This error : For input string "fabrik"
is generated by the tFileInputExcel component when encountering a non valid field (expected : integer ; given : string). You can't directly catch this error with the tFileInputExcel component (it's just printed out on the console).
However, you can use a tSchemaComplianceCheck component after your tFileInputExcelComponent : it will throw an error if a data is not valid for your schema. This component has a reject link to catch the error.
tFileInputExcel->tSchemaComplianceCheck->tMap->tMSOutput
If you use tLogCatcher component to catch the error then, at the end of the flow, you can add a tBufferOutput component. Keep the fields with the information you want for.
component configuration
The result will be like this (note that they are shown in the same order):
result
I get the following error:Service Invocation Exeption i am working with Version 8.7 IBM InfoSphere DataStage and QualityStage Designer and using a server job and there, i have 1 sequential file, web service, sequential file.
Any idea what could be the reason of this error ?
Make sure you have chosen proper DataStage job type and your stage that operates on web service is configured properly.
You should also check the DataStage logs to get more information about root cause of the error.
I get the error below when I try to access the Amazon SQS WSDL:
http://queue.amazonaws.com/doc/2012-11-05/QueueService.wsdl
Cannot access the WSDL or the WSDL file is invalid.
I believe I have .NET 4 SDK installed and I have tried downloading the WSDL file to a local drive and pointing the proxy wizard to it. Still the same error.
Can someone try to use it and let me know your outcomes?
Try running the .Net WSDL utility directly on the WSDL. That utility reports back error information. It's also what PowerBuilder is calling under the covers, but is not sharing the error information back to you.
When I do that, I get this result:
Error: Unable to import binding 'SimpleQueueServicePostBinding' from namespace '
http://queue.amazonaws.com/doc/2012-11-05/'.
- The operation 'GetQueueUrl' on portType 'SimpleQueueServicePortType' from na
mespace 'http://queue.amazonaws.com/doc/2012-11-05/' had the following syntax error:
The operation has no matching binding. Check if the operation, input and
output names in the Binding section match with the corresponding names in the PortType section.
It looks like it might be a problem with the format of the WSDL. Not the first time that's happened, I've had to edit one of their other WSDL files by hand to correct an error in it.
If you choose to do that, you can download the file to your local machine, make the edits, and then run the PB proxy tool against the local file.
Running Netbeans 6.5.1 with OpenESB (Glassfish-full-installer-windows2.1).
I'm using this tutorial (http://www.youtube.com/watch?v=a76RxkzB4Bg) as reference to orchestrate web services by calling a local WSDL that invokes an external WSDL (http://www.webservicex.net/CreditCard.asmx?WSDL). I have my BPEL ready
and my Composite Application created, it automatically binds a SOAP call from my local WSDL to the BPEL (Consumer to Producer), I had to drag and drop another SOAP object and configure it with the same interface as my local WSDL to receive the output from the invoke action (is that correct?).
When I run my test case selecting the operation from my local WSDL, I get the following SoapResponse:
<SOAP-ENV:Fault>
<faultcode xmlns="">SOAP-ENV:Server</faultcode>
<faultstring xmlns="">BPCOR-6135: A fault was not handled in the process scope; Fault Name is {http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault; Fault Data is &a....Sending errors for the pending requests in the process scope before terminating the process instance</faultstring>
<faultactor xmlns="">sun-bpel-engine</faultactor>
<detail xmlns="">
<detailText>BPCOR-6135: A fault was not handled in the process scope; Fault Name is {http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault; Fault Data is &a... Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: BPCOR-6131: An Error status was received while doing an invoke (partnerLink=externalBPELImplementation, portType={http://www.webservicex.net}CCCheckerSoap, operation=ValidateCardNumber)
BPCOR-6129: Line Number is 37
BPCOR-6130: Activity Name is Invoke1
Caused by: HTTP Status-Code 404: Not Found - Not Found</detailText>
</detail>
I've created a separated project to test the external WSDL and it is validating credit card numbers as expected, there's something wrong with my BPEL or my Composite Application.
If I create another test case and select the local port that is created when I drag and drop the Soap object into the Comp. App. Design interface, I get a different error:
Dec 24, 2012 12:54:11 AM com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection call
SEVERE: SAAJ0006: Bad URL (endPoint instance of String)
java.net.MalformedURLException: no protocol:
any ideas?
Your process seams to be correct (at the first look).
It looks like your process can't find the service you ask:
BPCOR-6130: Activity Name is Invoke1 - Caused by: HTTP Status-Code 404: Not Found - Not Found
Is your "soap adress" in the wsdl you imported correct ?
Have you try to overload the url in the bpel mapping ? (Properties -> SOAP HTTP BC -> Outbound -> UR)
There is also something strnage in your CASA: If you are trying to consume "localCreditCard_WSDLPort" and expose in OpenESB "casaPort1", the SOAP Binding are inversed. The arrow should start from casaPort1 and finish at localCreditCard_WSDLPort.
I hope this could help you,
Simon
According to #brasseld from www.open-esb.net
In fact, you've made two mistake :
The first one, for your unit test, you have to use the good WSDL which come from the BPEL because you've created a concrete SOAP WSDL
(CreditCard_WSDL.wsdl).
Then, when you create a new port in your composite application for your plnk externalServiceCard_WSDL, you have to set the soap address
location by right-click > properties. By default, this one is set to
localhost:${HttpDefaultPort}/compositeapp/casaportX?wsdl that's why
you encounter your errors (404 or bad url error).
Based on his suggestions, I've decided to document the development process step-by-step, here's the result:
http://www.youtube.com/watch?v=-1W1xR3-iJQ
when i tried to run the job i am getting the error saying that
No server could be found matching all conditions
please any one help me on this
In buildforge, the job is assigned to a selector.
The selector can be thought of as a pointer to an object that can represent either the name of a server, or a set of servers that matches a set of criteria.
When the job executes, the selector for that step attempts to find the server based on the criteria defined in the selector conditions. If it can't find a server that matches the selection conditions, you get the posted error message.
In real life, this error usually indicates the following:
1. The agent on the server is dead, or the server is down. Run bfservertest (or test connection in the buildforge web UI) to see if the agent is functioning. Visit the machine remotely or in person to verify that the server is up. Try restarting the agent service if machine is up and connection test fails.
2. The selector is pointing to a non-existent server because you misspelled the server name.
3. You have conditions defined in the selector that unintentionally exclude all servers from being used.