The webservice isthrowing the following error when i browse from IIS:
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note:
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
In event viewer, I am getting the following message:
Failed to execute request because the App-Domain could not be created. Error: 0x80131509
For more information, see Help and Support Center at http://go.microsoft.com/fwlink events.asp.
I'm not able the understand the the problem actually is and how to resolve this. please help me.
I have found a very good article that worked for me:
https://askgif.com/blog/148/i-m-getting-error-server-application-unavailable-in-iis/
There seems to be a problem with your IIS installation, specifically, the Application Pool associated to your website. This could be because ASP.NET is not installed properly.
Please try the following:
Remove your website and application pool and recreate them
Install ASP.NET - run this command: %windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe–i as an Administrator.
Related
I have a business website that has been running perfectly well on IIS using .NET 4.5, but in Azure it fails.
Now before I lead you too far down this rabbit hole, I can make the IIS fault in the same way as the Azure fault detailed below by NOT converting the website to Application. However, for the life of me I cannot find the equivalent option in Azure; how to convert to Application or equivalent?
I have uploaded to Azure using the Azure App Service Migration Assistant. The only alert was:
"IIS7+ Schema Compliance: One or more elements and/or attributes are being used which are not defined in Azure App Service IIS schema. Consider using XDT transforms."
This links to https://learn.microsoft.com/en-nz/azure/app-service/web-sites-configure which indicates various Azure Application Settings, which I have played with to no avail.
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Source File: D:\home\site\wwwroot\peterfinch\service.desktop\web.config Line: 143
Can anyone please provide any guidance as to what I am missing? many thanks for your time, Peter Finch
so the answer was setting virtual applications and directories for each website, and this now just worked. App Service, Application Settings, at the end of the list, Virtual applictions and directories.
This was the part that was missing, how to 'convert to application'
So resolved it myself, thanks for looking and I hope this helps someone else in the future.
/ site\wwwroot Application x
/mysitename site\wwwroot\mysitename Application
/mysitename/Console site\wwwroot\mysitename\Console\ Application x
/mysitename/Service.App site\wwwroot\mysitename\Service.App\ Application x
/mysitename/Service.Desktop site\wwwroot\mysitename\Service.Desktop Application x
I have a web service that has been running on CF 8 for awhile now without issues. We've recently moved to CF10, and this web service no longer works. I've already tried switching the Axis setting to 1, it's still tossing errors. Has anyone else encountered this, or have an ideas on what else to look for here?
Process:
CF Server sends a web service request to App Server.
App Server processes request, generates another web service back to CF Server with SOAP data pushes, then replies back to the step 1 originating request with a boolean response on how its own web service request went.
CF Server Errors:
The web service operation caused an invocation exception.The root cause was that: ClientAbortException: java.net.SocketException: Connection reset by peer: socket write error.
Cannot perform web service invocation [Method Name]. The fault returned when invoking the web service operation is: java.lang.NoClassDefFoundError: org/apache/james/mime4j/MimeException
App Server Error Logs:
com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
SEVERE: SAAJ0009: Message send failed
com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
Caused by: java.io.IOException: Error writing to server
I've gone as far as modifying the App Server configuration to have it's web service request push out to the CF 8 server for processing, while still replying back to the originating request from the CF 10 server. This worked fine. It's definitely something with the requests or my CF 10 web service config.
I can't post any of the code examples unfortunately.
24 Sept 13 Update
I've tried various combinations of v1 and v2 in the CF admin, with wsdl and wsdl2, and the application.cfc setup. The app that is interacting with this service has given me the ability to modify a variety of parameters for soap versioning and some internal items. I can get the two services to talk with a bare bones connection of give me your soap and I'll toss a YES back. Whenever I try to use the full request it seems to never actually hit my web service, and gets stopped somewhere by CF. I see no logging on it other than in the web service log.
I found the solution to my problem. The ColdFusion connector was causing the fault. After installing ColdFusion 10 and patching, I had run the wsconfig to rebuild the connector. I had either done this incorrectly, or for some reason it didn't take. I ran it this morning, removed the connector, re-added it.... everything working fine now. Very frustrating.
i have a gwt app deployed to Jetty, i use maven, maven-jetty-plugin, following the instruction provided here: http://docs.codehaus.org/display/JETTY/Maven+Jetty+Plugin, my project follows the maven structure so no configuration needed, all i need is to run : mvn jetty:run, then i can see jetty server started, back to browser, i typed 127.0.0.1:8080 i saw a page with Error 404 -Not Found, saying:
No context on this server matched or handled this request.
Context known to this server are:
/console --> org.mortbay.jetty.plugin.Jetty6PluginWebAppContext#1c093b3c{/console./Users/Hj/Documents/workspace/samples/console/src/main/webapp}
and that's my webapp '/console', so i click that link, it went to 127.0.0.1:8080/console url and here is the message on that page:
HTTP ERROR: 503
Problem accessing /console. Reason: SERVICE_UNAVAILABLE
does anyone know what's wrong here? i think the web app was deployed to Jetty, how come it says service unavailable? thanks.
when i try opening http://127.0.0.1:8500/test.com
I get
500 There is no web application configured to service your request There is no web application configured to service your request
when i try opening http://127.0.0.1:8500/CFIDE/
I GET THE same error
Kindly guide me to solution.
It means the server did not fully start. The JRun container started and was able to accept an HTTP Request via its internal webserver port, but then the ColdFusion Server inside JRun was not fully deployed or not deployed at all.
The startup events in /path/to/coldfusion8/runtime/logs/coldfusion-event.log and /path/to/coldfusion8/logs/server.log will contain details about what failed during ColdFusion startup.
You will probably not make sense of the events as they are usually somewhat cryptic. Please post log contents for further diagnosis.
My BlackBerry application consumes axis2 web services. SOAP POST HTTP request constantly fails with this error "Invalid service URL". I launch my app in 8800 simulator with ";deviceside=false" option specified. MDS is running.
I can't test my app on real device for now. Any help?
Problem solved. You need to add specific options to MDS configuration to make it work behind proxy. Here's an artical that describes the solution.